Measurement/Control/Program Arduino compatible board RDC-103 Zero-RDC-103 Zero Type1

Measurement/Control/Program Arduino compatible board RDC-103 Zero-RDC-103 Zero Type2

Measurement/Control/Program Arduino compatible board RDC-103 Zero-RDC-103 Zero Type3

Program Arduino compatible board RDC-103 Zero
JAPANROBOTECH Co., Ltd.

JAPANROBOTECH Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

2.0hours

Very Fast Response

About This Product

This is an Arduino/SensorBoard compatible controller. Equipped with 4 sensors on the board All models are equipped with 4 sensors (light, sound, slider, button) and LED, so all you need is the board and your computer. You can experiment right away.

■Various input portsA 3-pin analog input connector and an I2C connector allow you to connect additional sensors. A pair of terminals for Minomushi clips are also provided so that you can easily measure the resistance of various things. If you attach an expansion pin header and combine it with a breadboard cover, you can experiment with commercially available sensors and electronic components.

■Motor driverIt is possible to control the forward/reverse direction and speed of two DC motors for Type I/Type II and four DC motors for Type III.

■Servo pinType I and Type II can control 8 servos, and Type III can control 4 servos. 

■Accessories (common)・Equipped with sensors: brightness/sound/slider/button
·buzzer

*The upper limit for DC motors is approximately 0.5A per piece. Please check the rated voltage and current of the motor to be connected.
*Windows 8.1 driver installation is required twice, as it is performed for the bootloader and sketch respectively. It is also required for each USB port.

Model
There are 4 models for this product.

Product
Measurement/Control/Program Arduino compatible board RDC-103 Zero

Handling Company
JAPANROBOTECH Co., Ltd.

380+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Measurement/Control/Program Arduino compatible board RDC-103 Zero

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Power supply	LCD/Cover	Onboard sensor/output	Expansion pin header	Size	Program environment Compatible OS	Program environment	Servo output (shared with digital pin)	Analog input connector 3.3V, 10bit (1024)	Minomushi clip terminal	MPU	I2C connector	DC motor output (control is shared with digital pin)
RDC-103 Zero Type1	$ 46.09〜	USB, V1 (6V)	-	Switch, sound, brightness, slider, white LED (pin assignment)	None (through holes for installation are available)	W: 56mm, H: 88mm	Windows10/8.1, MacOSX (32bit, Catalina not supported)	Arduino (C language), ArduBlock (visual programming language), Scratch (visual programming language, always connected via USB)	8	2	1 set (pull-up input/ground)	ATMega32U4, built-in Flash: 32KB, clock: 8MHz	1	2 (M1/M2) (pin assignment)
RDC-103 Zero Type2	$ 65.00〜	USB, V1 (6V)	Monochrome LCD/transparent cover	Switch, sound, brightness, slider, white LED (pin assignment)	None (through holes for installation are available)	W: 56mm, H: 88mm	Windows10/8.1, MacOSX (32bit, Catalina not supported)	Arduino (C language), ArduBlock (visual programming language), Scratch (visual programming language, always connected via USB)	8	2	1 set (pull-up input/ground)	ATMega32U4, built-in Flash: 32KB, clock: 8MHz	1	2 (M1/M2) (pin assignment)
RDC-103 Zero Type3	$ 57.92〜	USB, V1 (6V), V2 (3~12V for M3/M4)	-	Switch, sound, brightness, slider, white LED (pin assignment)	Analog input side, digital side 4 pins (shared with servo)	W: 56mm, H: 88mm	Windows10/8.1, MacOSX (32bit, Catalina not supported)	Arduino (C language), ArduBlock (visual programming language), Scratch (visual programming language, always connected via USB)	4	6 (3 are switched by sensors and jumpers on the board, 1 is a pull-up)	1 set (pull-up input/ground)	ATMega32U4, built-in Flash: 32KB, clock: 8MHz	1	4 (M1/M2/M3/M4) (pin assignment)
RDC-103 Zero Type3+	$ 76.82〜	USB, V1 (6V), V2 (3~12V for M3/M4)	Monochrome LCD/transparent cover	Switch, sound, brightness, slider, white LED (pin assignment)	Analog input side, digital side 4 pins (shared with servo)	W: 56mm, H: 88mm	Windows10/8.1, MacOSX (32bit, Catalina not supported)	Arduino (C language), ArduBlock (visual programming language), Scratch (visual programming language, always connected via USB)	4	6 (3 are switched by sensors and jumpers on the board, 1 is a pull-up)	1 set (pull-up input/ground)	ATMega32U4, built-in Flash: 32KB, clock: 8MHz	1	4 (M1/M2/M3/M4) (pin assignment)

Click on the part number for more information about each product

Other products of JAPANROBOTECH Co., Ltd.

Reviews shown here are reviews of companies.

Measurement/control/program Arduino compatible board RDC-104

JAPANROBOTECH Co., Ltd.

$39.00

510+ people viewing

Last viewed: 7 hours ago

Response time: 2.02 hours

4 models listed

Pencil programmer/pencil programmer set

JAPANROBOTECH Co., Ltd.

$49.05

310+ people viewing

Last viewed: 2 minutes ago

Response time: 2.02 hours

2 models listed

Measurement/control/program set RDC-setA with servo motor/RDC-setB with tire gear box

JAPANROBOTECH Co., Ltd.

$28.96

230+ people viewing

Last viewed: 2 hours ago

Response time: 2.02 hours

Small Servo Motors

4 models listed

Small Bot/Small Bot Plus

JAPANROBOTECH Co., Ltd.

$34.87

280+ people viewing

Response time: 2.02 hours

2 models listed

Omnidirectional drive control programming robot RDS-4WD55_104TYPE3

JAPANROBOTECH Co., Ltd.

$117.00

180+ people viewing

Response time: 2.02 hours

RDS-X Series Rover autonomous robot RDS-X21/Ultrasonic collision avoidance robot RDS-X22/Soccer base robot RDS-X23

JAPANROBOTECH Co., Ltd.

$59.09

350+ people viewing

Last viewed: 1 hour ago

Response time: 2.02 hours

8 models listed

RDS-TEC series RDS-TEC31/ 34 / 36-LINE/ 36-Rescue / 36-Rescue 4WD

JAPANROBOTECH Co., Ltd.

$71.50

400+ people viewing

Last viewed: 17 hours ago

Response time: 2.02 hours

10 models listed

PID control starter set RDS-X25 (Zero)

JAPANROBOTECH Co., Ltd.

$96.20

220+ people viewing

Last viewed: 4 minutes ago

Response time: 2.02 hours

2 models listed

4ch wired remote control robot basic production set RDS-X04

JAPANROBOTECH Co., Ltd.

$29.25

140+ people viewing

Response time: 2.02 hours

Cultivation factory illuminance sensor/LED light/AC adapter/DC jack to 2-pin XH connector conversion cable

JAPANROBOTECH Co., Ltd.

$2.60

350+ people viewing

Last viewed: 2 hours ago

Response time: 2.02 hours

Luminometers

9 models listed

Cultivation factory/LED light stand set

JAPANROBOTECH Co., Ltd.

$44.20

130+ people viewing

Last viewed: 6 hours ago

Response time: 2.02 hours

Competition Equipment Line Trace & Grayscale Sheet/Soccer Robot Vehicle Inspection Cylinder/Beginners League Field

JAPANROBOTECH Co., Ltd.

$15.47

210+ people viewing

Last viewed: 22 hours ago

Response time: 2.02 hours

3 models listed

View more products of JAPANROBOTECH Co., Ltd.

About Company Handling This Product

JAPANROBOTECH Co., Ltd.

Response Rate

100.0%

Response Time

2.0hrs

Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Measurement/Control/Program Arduino compatible board RDC-103 Zero JAPANROBOTECH Co., Ltd.

JAPANROBOTECH Co., Ltd.'s Response Status

About This Product

■Various input ports

■Motor driver

■Servo pin

■Accessories (common)

4 Models of Measurement/Control/Program Arduino compatible board RDC-103 Zero

RDC-103 Zero Type1

RDC-103 Zero Type2

RDC-103 Zero Type3

RDC-103 Zero Type3+

Other products of JAPANROBOTECH Co., Ltd.

About Company Handling This Product

Measurement/Control/Program Arduino compatible board RDC-103 Zero
JAPANROBOTECH Co., Ltd.