All Categories

History

Measurement/control/program Arduino compatible board RDC-104-RDC-104 Type1
Measurement/control/program Arduino compatible board RDC-104-RDC-104 Type2
Measurement/control/program Arduino compatible board RDC-104-RDC-104 Type3
Measurement/control/program Arduino compatible board RDC-104-RDC-104 Type3+
Measurement/control/program Arduino compatible board RDC-104-JAPANROBOTECH Co., Ltd.

Measurement/control/program Arduino compatible board RDC-104
JAPANROBOTECH Co., Ltd.

JAPANROBOTECH Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

2.0hours

Very Fast Response


About This Product

Many Arduino compatible boards cannot connect motors, servos, etc. as is. It also doesn't have a sensor. RDC is an Arduino/SensorBoard compatible controller. RDC allows you to easily connect teaching materials and commercially available motors and servos to control robots and moving models with programs. A variety of experiments can be performed using the on-board sensors. You can use AA batteries or a commercially available mobile battery (micro USB) as a power source.

■Equipped with 4 sensors on the board

All models are equipped with four sensors: light, sound, slider, and button, as well as an LED, so you can experiment right away with just a board and a computer. Masu.

■Various input ports

A 3-pin header with analog input, I2C socket allows you to connect additional sensors. A pair of terminals for Minomushi clips are also provided so that you can easily measure the resistance of various things.

■Motor driver

It is possible to control the forward/reverse direction and speed of two DC motors for Type I/Type II and four DC motors for Type III.

■Servo pin

Up to 10 servos can be connected. (It is shared with other outputs. Also, the number that can be operated at the same time depends on the current consumption of the servo)

■Accessories (common)

・Equipped with sensors: brightness/sound/slider/button ・Minomushi clip terminal x1 set ・I2C socket x2 ・Ultrasonic ranging sensor socket x2 ・Servo terminal x10 (shared with motor control, button, LED)

  • Product

    Measurement/control/program Arduino compatible board RDC-104

Share this product


510+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of Measurement/control/program Arduino compatible board RDC-104

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply circuit/motor M1, M2 Power supply Motor M3, M4 Weight LCD/Cover Onboard sensor/output Size Servo output (also used as digital pin) Analog input connector Minomushi clip terminal MPU
Measurement/control/program Arduino compatible board RDC-104-Part Number-RDC-104 Type1

RDC-104 Type1

$ 39.00〜

Supplied from USB/V1 connector, 6.0V

Supplied from USB/V1 connector, 6.0V

Approximately 19.0 grams

Option

Equipped with an infrared sensor, sound sensor, light sensor, slider, and white LED on the board

66mm x 55mm, thickness 20mm

Can control 10 servo motors

2

Can be

8Bit AVR ATMEGA32U4/Built-in Flash 32kB/RAM 2.5kB/Operating clock 8MHz

Measurement/control/program Arduino compatible board RDC-104-Part Number-RDC-104 Type2

RDC-104 Type2

$ 52.00〜

Supplied from USB/V1 connector, 6.0V

Supplied from USB/V1 connector, 6.0V

Approximately 19.0 grams

Monochrome LCD/transparent cover

Equipped with an infrared sensor, sound sensor, light sensor, slider, and white LED on the board

66mm x 55mm, thickness 20mm

Can control 10 servo motors

2

Can be

8Bit AVR ATMEGA32U4/Built-in Flash 32kB/RAM 2.5kB/Operating clock 8MHz

Measurement/control/program Arduino compatible board RDC-104-Part Number-RDC-104 Type3

RDC-104 Type3

$ 45.50〜

Supplied from USB/V1 connector, 6.0V

Voltage matched to the motor supplied from the V2 connector (for M3 and M4: 3~12V)

Approximately 19.0 grams

Option

Equipped with an infrared sensor, sound sensor, light sensor, slider, and white LED on the board

66mm x 55mm, thickness 20mm

Can control 10 servo motors

5

Can be

8Bit AVR ATMEGA32U4/Built-in Flash 32kB/RAM 2.5kB/Operating clock 8MHz

Measurement/control/program Arduino compatible board RDC-104-Part Number-RDC-104 Type3+

RDC-104 Type3+

$ 58.50〜

Supplied from USB/V1 connector, 6.0V

Voltage matched to the motor supplied from the V2 connector (for M3 and M4: 3~12V)

Approximately 19.0 grams

Monochrome LCD/transparent cover

Equipped with an infrared sensor, sound sensor, light sensor, slider, and white LED on the board

66mm x 55mm, thickness 20mm

Can control 10 servo motors

5

Can be

8Bit AVR ATMEGA32U4/Built-in Flash 32kB/RAM 2.5kB/Operating clock 8MHz

Click on the part number for more information about each product

Other products of JAPANROBOTECH Co., Ltd.

Reviews shown here are reviews of companies.


View more products of JAPANROBOTECH Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

2.0hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree