Multiscale Single Rogowski Coil Converter RPS50
Algodue Elettronica s.r.l.
About This Product
■Summary
The RPS50 is a multiscale Rogowski coil integrator housed in a compact DIN rail enclosure and powered directly from the mains.
An integrator is essential to equalize and shift the output signal from the Rogowski coil by 90 degrees. It consists of active electronics with negligible offset and good linearity. The RPS50 can be combined with MFC150 Rogowski coils of any model and size.
This module is available in standard configurations with one of three full scales:
・0.5 - 2.5 - 10 kA or 2.5 - 10 - 50 kA or 10 - 50 - 250 kA.
Two different outputs are available.
Standard output that performs instantaneous values at 1 or 3 VRMS full scale.
- Optional DC output to perform RMS value of measured current.
The RPS50 and Rogowski current transducer is a highly flexible system suitable for high power load analysis, shock current monitoring, DC ripple measurements, etc. The flexible Rogowski coil is a very comfortable solution due to its specific features.
■Features
・3 scales can be selected with dip switch
・Equalization and 90° shift of Rogowski coil signal
・1 or 3 VRMS full scale output for instantaneous values
・DC output for effective value
・Compact DIN rail housing
・80~250VAC power supply
-
Product
Multiscale Single Rogowski Coil Converter RPS50
-
Handling Company
Algodue Elettronica s.r.l.
-
Categories
1 Models of Multiscale Single Rogowski Coil Converter RPS50
| Product Image | Part Number | Price (excluding tax) | Accuracy | EMC standard | Frequency range | Full scale value | Input | Input level (RMS) (1) | Operating temperature | Output 1 | Output 1 load | Output 2 | Power consumption | Rated voltage | Relative humidity | Safety standards | Size | Storage temperature | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
RPS50 |
Available upon quote | Better than ±1% of full scale (not guaranteed for full scale ≤10 mV) |
Directive 89/366/EEC and subsequent amendments 93/31/EEC and 93/68/EEC, EN50081-2, EN50082-2, EN61326/A1 |
8Hz~100kHz@-3dB |
0,5-2,5-10kA 2,5-10-50kA 10-50-250kA |
1 for Rogowski coil | 100mV/1kA@50Hz (only if purchased without MFC150 coil) | -10℃~+50℃ |
1VRMS (maximum crest factor 4.5) 3VRMS (maximum crest factor 1.5) |
>10kOhm | 0~10VCC (0~20mA, 4~20mA on request) | Max 1.5VA | 80...250VCA 50/60Hz | Up to 80% (non-condensing) | 73/23/EEC and 93/68/EEC directives, EN61010.1 safety standards | 115x100x23mm | -25℃~+70℃ | Approximately 117g |
Customers who viewed this product also viewed
Other products of Algodue Elettronica s.r.l.
View more products of Algodue Elettronica s.r.l.
