All Categories
History
Product
PIC series can be used for both directions with resistance and insulationHandling Company
Nippon TechnartCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | Test voltage | Dirty current setting | Disconnected current accuracy | Transformer capacity | NG judgment | NG display | Timer setting time | OK display | Indicator | Volt scalid measure | High -pressure adoption method | Rated measurement voltage | Measurement range | Warning value setting | Judgment delay time | Measurement accuracy | Output polarity | Test mode | Motion display | External control | Power-supply voltage | fuse | power consumption | Dimensions / weight | Leaku current meter | Current meter control |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PIC-513 |
Available upon quote |
Continuous variable from AC0 to rated voltage |
AC0.5-1-2-5-10-MAX (MA) (MAX current value varies depending on the model) |
± 5 % of display values |
500va |
NG display when the measurement value is more than a blocking current setting value |
NG lamp, NG buzzer (volume control available ON/OFF switch), NG signal (make contact signal), high -pressure output blocking |
0.5 seconds to 10 minutes arbitrary settings (1/10, seconds/minute range switching) With ON/OFF switch |
OK lamp, OK signal (make -up point signal), high -pressure output blocking |
JIS1.5 Class 120 × 100mm Average value response / effective value conversion scale |
± 5 % of the indicated value |
Zero cross switch starts and blocks zero -position synchronization |
Standard product 250V/500V Scale Inside the Regional Regional Voltage Pressing Method A type 500V/1000V Scale Inside the Standed Voltage Purdol |
Standard product x 1 range: 0.4mΩ ~ 20mΩ x 10 Range: 4mΩ to 200mΩ × 1 range: 4mΩ to 200mΩ × 10 Range: 40mΩ ~ 2000mΩ |
Optional settings can be set in the scale |
Approximately 0.3 seconds |
± 5 % of the indicated value (± 10 % of the second valid measurement range indicated value) |
Negative polarity |
Auto Test Mode: (Power Polt |
Test item test lamp display |
Test/reset can be controlled from the outside: 0.1 seconds to 0.5 seconds make -up point signal |
AC100V50/60Hz |
30L10A glass tube fuse |
600VA at the rated load |
430 (W) x 250 (H) x 400 (d) mm about 27kg435 (W) x 265 (H) x 455 (d) mm (maximum dimension) |
- | - |
|
|
PIC-515L |
Available upon quote |
Continuous variable from AC0 to rated voltage |
AC1-10-100MAF.S Involved with blocking current setting knobs |
± 5 % of display values |
500va |
NG display when the measurement value is more than a blocking current setting value |
NG lamp, NG buzzer (volume control available ON/OFF switch), NG signal (make contact signal), high -pressure output blocking |
0.5 seconds to 10 minutes arbitrary settings (1/10, seconds/minute range switching) With ON/OFF switch |
OK lamp, OK signal (make -up point signal), high -pressure output blocking |
JIS1.5 Class 120 × 100mm Average value response / effective value conversion scale |
± 5 % of the indicated value |
Zero cross switch starts and blocks zero -position synchronization |
- | - | - | - | - | - | - | - | - | - | - | - | - |
AC1-10-100MAF.S Involved with blocking current setting knobs |
± 5 % of the indicated value |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
