All Categories

History

Wristwatch type (wearable) gas detector GW-3 series-GW-3 (O2)
Wristwatch type (wearable) gas detector GW-3 series-GW-3 (OX)
Wristwatch type (wearable) gas detector GW-3 series-GW-3 (HS)
Wristwatch type (wearable) gas detector GW-3 series-GW-3 (CO)
Wristwatch type (wearable) gas detector GW-3 series-GW-3 (C-)
Wristwatch type (wearable) gas detector GW-3 series-GW-3 (CX)
Wristwatch type (wearable) gas detector GW-3 series-Riken Keiki Co., Ltd.

Wristwatch type (wearable) gas detector GW-3 series
Riken Keiki Co., Ltd.

🧪 Chemical Industry Use ⚡ Energy Industry Use

Riken Keiki Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

29.0hours

Relatively Fast Response


About This Product

Peace of mind near you. Evolves into a wearable device at only 45g Features

■Small, lightweight design that can be worn directly

The compact and lightweight design weighs only 45g, so you can wear it anywhere, including your wrist, arm, or your helmet band. In addition to buzzers and lamps, gas alarms are notified by vibration. By wearing it on your wrist or arm, you can quickly notice danger through vibration even in noisy conditions.

■Equipped with a new high-performance and highly durable R sensor

Excellent durability and performance, with a 3-year sensor warranty (GW-3 (O2) only has a 1-year sensor warranty). Can be used in a wide temperature range (-20~+60℃). We have a lineup of carbon monoxide sensors that are virtually unaffected by hydrogen interference, and are compatible with environments where hydrogen coexists, such as in the steel market. The first carbon monoxide and oxygen dual sensor lineup from a domestic manufacturer, realizing two-component detection in a small and portable device.

■Safe design that can be used anywhere

Protection grade: IP66/68 equivalent, dustproof and waterproof construction for peace of mind for outdoor work. Intrinsically safe explosion-proof structure (domestic explosion-proof/ATEX/IECEx/INMETRO/China Ex), can be used in hazardous locations.

■Options (sold separately)

・Watch strap ・Belt clip ・Alligator clip ・Heat-resistant case ・Dust filter ・Various filters ・Calibration cap ・Leather case ・Arm band ・Data logger management program

  • Product

    Wristwatch type (wearable) gas detector GW-3 series
  • Usage Scenarios

    Chemical Industry Use / Energy Industry Use

Share this product


730+ people viewing

Last viewed: 4 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Wristwatch type (wearable) gas detector GW-3 series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) JIS conformity standard Sampling method Buzzer volume Operating temperature range Operating humidity range Protection class Resolution Various certifications External dimensions/mass Response time T90 Detection principle Gas to be detected Detection range (display range) Alarm Alarm action Alarm reset operation Alarm setting value Continuous use time Explosion-proof structure Power supply Function Accessories
Wristwatch type (wearable) gas detector GW-3 series-Part Number-GW-3 (O2)

GW-3 (O2)

Available upon quote

JIS T 8201:2010

Diffusion type

80dB or more (30cm)

-20~+50℃ (no sudden changes)

10~90%RH (no condensation)

IP66/68 equivalent

0.10%

CE marking

Approx. 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approx. 45g

Within 20 seconds (Typical: 9 seconds)

Diaphragm galvanic battery type

Oxygen

0.0-25.0% (0.0-40.0%)

Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm, over alarm Failure alarm: Sensor connection/disconnection, battery voltage drop, calibration failure, clock abnormality, system abnormality

Flashing lamp, intermittent buzzer, flashing gas concentration value, vibration

Automatic return or self-retention

L 18.0% LL 18.0% H 25.0%

Approximately 4,000 hours

Intrinsically safe explosion-proof construction Type certification for explosion-proof electrical machinery and equipment (Ex ia IIC T4 Ga) ATEX (II1 G Ex ia IIC T4 Ga)

Coin type lithium battery CR2450

Data logger, vibration, STEL alarm, integration or TWA alarm, one-touch calibration, peak value display, temperature display

Coin type lithium battery CR2450: 1 piece
Watch strap: 1 piece (excluding GW-3 (CX))
Belt clip: 1 piece (excluding GW-3 (CX))
Heat-resistant case: 1 piece (GW-3 (CX) only)

Wristwatch type (wearable) gas detector GW-3 series-Part Number-GW-3 (OX)

GW-3 (OX)

Available upon quote

It has the same performance as JIS compliant products. (Excluding JIS T 8201:2010 "6.10 Alarm delay test")

Diffusion type

80dB or more (30cm)

-20~+60℃ (no sudden changes)

0~95%RH (no condensation)

IP66/68 equivalent

0.10%

CE marking

Approx. 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approx. 45g

Within 30 seconds (Typical: 8 seconds)

Constant potential electrolysis type

Oxygen

0.0-25.0% (0.0-40.0%)

Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm, over alarm Failure alarm: Sensor connection/disconnection, battery voltage drop, calibration failure, clock abnormality, system abnormality

Flashing lamp, intermittent buzzer, flashing gas concentration value, vibration

Automatic return or self-retention

L 18.0% LL 18.0% H 25.0%

Approximately 2,000 hours

Intrinsically safe explosion-proof construction Type certification for explosion-proof electrical machinery and equipment (Ex ia IIC T4 Ga) ATEX (II1 G Ex ia IIC T4 Ga)

Coin type lithium battery CR2450

Data logger, vibration, STEL alarm, integration or TWA alarm, one-touch calibration, peak value display, temperature display

Coin type lithium battery CR2450: 1 piece
Watch strap: 1 piece (excluding GW-3 (CX))
Belt clip: 1 piece (excluding GW-3 (CX))
Heat-resistant case: 1 piece (GW-3 (CX) only)

Wristwatch type (wearable) gas detector GW-3 series-Part Number-GW-3 (HS)

GW-3 (HS)

Available upon quote

JIS T 8205:2018

Diffusion type

80dB or more (30cm)

-20~+60℃ (no sudden changes)

0~95%RH (no condensation)

IP66/68 equivalent

0.1ppm (0.0-30.0ppm) 1.0ppm (30.0-200.0ppm)

CE marking

Approx. 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approx. 45g

Within 30 seconds (Typical: 18 seconds)

Constant potential electrolysis type

Hydrogen sulfide

0.0-30.0ppm (0.0-200.0ppm)

Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm, over alarm Failure alarm: Sensor connection/disconnection, battery voltage drop, calibration failure, clock abnormality, system abnormality

Flashing lamp, intermittent buzzer, flashing gas concentration value, vibration

Automatic return or self-retention

1st 1ppm 2nd 10ppm 3rd 10ppm TWA 1ppm STEL 5ppm

Approximately 4,000 hours

Intrinsically safe explosion-proof construction Type certification for explosion-proof electrical machinery and equipment (Ex ia IIC T4 Ga) ATEX (II1 G Ex ia IIC T4 Ga)

Coin type lithium battery CR2450

Data logger, vibration, STEL alarm, integration or TWA alarm, one-touch calibration, peak value display, temperature display

Coin type lithium battery CR2450: 1 piece
Watch strap: 1 piece (excluding GW-3 (CX))
Belt clip: 1 piece (excluding GW-3 (CX))
Heat-resistant case: 1 piece (GW-3 (CX) only)

Wristwatch type (wearable) gas detector GW-3 series-Part Number-GW-3 (CO)

GW-3 (CO)

Available upon quote -

Diffusion type

80dB or more (30cm)

-20~+60℃ (no sudden changes)

0~95%RH (no condensation)

IP66/68 equivalent

1ppm (0-300ppm) 10ppm (300-2000ppm)

CE marking

Approx. 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approx. 45g

Within 30 seconds (Typical: 6 seconds)

Constant potential electrolysis type

Carbon monoxide

0-500ppm (0-2000ppm)

Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm, over alarm Failure alarm: Sensor connection/disconnection, battery voltage drop, calibration failure, clock abnormality, system abnormality

Flashing lamp, intermittent buzzer, flashing gas concentration value, vibration

Automatic return or self-retention

1st 50ppm 2nd 150ppm 3rd 150ppm Total 150ppm STEL 200ppm

Approximately 4,000 hours

Intrinsically safe explosion-proof construction Type certification for explosion-proof electrical machinery and equipment (Ex ia IIC T4 Ga) ATEX (II1 G Ex ia IIC T4 Ga)

Coin type lithium battery CR2450

Data logger, vibration, STEL alarm, integration or TWA alarm, one-touch calibration, peak value display, temperature display

Coin type lithium battery CR2450: 1 piece
Watch strap: 1 piece (excluding GW-3 (CX))
Belt clip: 1 piece (excluding GW-3 (CX))
Heat-resistant case: 1 piece (GW-3 (CX) only)

Wristwatch type (wearable) gas detector GW-3 series-Part Number-GW-3 (C-)

GW-3 (C-)

Available upon quote -

Diffusion type

80dB or more (30cm)

-20~+60℃ (no sudden changes)

0~95%RH (no condensation)

IP66/68 equivalent

1ppm (0-300ppm) 10ppm (300-2000ppm)

CE marking

Approx. 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approx. 45g

Within 30 seconds (Typical: 17 seconds)

Constant potential electrolysis type

Carbon monoxide (hydrogen interference reduction)

0-500ppm (0-2000ppm)

Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm, over alarm Failure alarm: Sensor connection/disconnection, battery voltage drop, calibration failure, clock abnormality, system abnormality

Flashing lamp, intermittent buzzer, flashing gas concentration value, vibration

Automatic return or self-retention

1st 50ppm 2nd 150ppm 3rd 150ppm Total 150ppm STEL 200ppm

Approximately 2,500 hours

Intrinsically safe explosion-proof construction Type certification for explosion-proof electrical machinery and equipment (Ex ia IIC T4 Ga) ATEX (II1 G Ex ia IIC T4 Ga)

Coin type lithium battery CR2450

Data logger, vibration, STEL alarm, integration or TWA alarm, one-touch calibration, peak value display, temperature display

Coin type lithium battery CR2450: 1 piece
Watch strap: 1 piece (excluding GW-3 (CX))
Belt clip: 1 piece (excluding GW-3 (CX))
Heat-resistant case: 1 piece (GW-3 (CX) only)

Wristwatch type (wearable) gas detector GW-3 series-Part Number-GW-3 (CX)

GW-3 (CX)

Available upon quote -

Diffusion type

80dB or more (30cm)

-20~+60℃ (no sudden changes)

0~95%RH (no condensation)

IP66/68 equivalent

1ppm (0-300ppm) 10ppm (300-2000ppm) 0.1%

CE marking

Approx. 63 (W) x 42 (H) x 22 (D) mm (excluding protrusions) / Approx. 45g

Within 30 seconds (Typical: 7 seconds) Within 30 seconds (Typical: 15 seconds)

Constant potential electrolysis type

Carbon monoxide oxygen

0-500ppm (0-2000ppm) 0.0-25.0% (0.0-40.0%)

Gas alarm: 3-stage alarm, STEL alarm, integration or TWA alarm, over alarm Failure alarm: Sensor connection/disconnection, battery voltage drop, calibration failure, clock abnormality, system abnormality

Flashing lamp, intermittent buzzer, flashing gas concentration value, vibration

Automatic return or self-retention

1st 50ppm 2nd 150ppm 3rd 150ppm Total 150ppm STEL 200ppm L 18.0% LL 18.0% H 25.0%

Approximately 2,000 hours

Intrinsically safe explosion-proof construction Type certification for explosion-proof electrical machinery and equipment (Ex ia IIC T4 Ga) ATEX (II1 G Ex ia IIC T4 Ga)

Coin type lithium battery CR2450

Data logger, vibration, STEL alarm, integration or TWA alarm, one-touch calibration, peak value display, temperature display

Coin type lithium battery CR2450: 1 piece
Watch strap: 1 piece (excluding GW-3 (CX))
Belt clip: 1 piece (excluding GW-3 (CX))
Heat-resistant case: 1 piece (GW-3 (CX) only)

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Gas Detectors Products

Other products of Riken Keiki Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Riken Keiki Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

29.0hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree