Easy to use general-purpose aircraft NC small planomillers C-25N/30N-C25N-H

Easy to use general-purpose aircraft NC small planomillers C-25N/30N
Chuo Seiki Co., Ltd.

Chuo Seiki Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

0.5hours

Very Fast Response

About This Product

Feature
■ Rigid body structureThe cross rail is fixed to a column and has a gates that can maintain high rigidity, the table is supported by a long head, there is no overhang, and it is stable enough for heavy cutting. Tables, cross rails, beds, etc. are made of high -quality Mihannite cast iron with high rigidity.

The use of a large -diameter ball screw and high rigidity linear ball guide, both X and Y -axes, have low sliding frictional resistance, excellent abrasion resistance, high positioning accuracy, and can maintain long accuracy even if heavy objects are loaded. In addition, the appropriate anti -pressure has sufficient rigidity, earthquake resistance, and the cutting surface is good.

■ Operability in pursuit of ease of useApart from NC operation, it can be easily operated as a general -purpose machine by adopting monolber switches. At the time of manual operation, you can easily change the width of the main shaft override and the cutting shipping with a rotary switch.

■ Selection suitable for workThere are two types of front heads: low -speed heavy cut torque type and standard type. You can also select four types by combining a general -purpose side head.

■ High torque head for heavy cutting (15kW main axis rotation 50-850rpm (option 18.5kw))The main axis is guaranteed high -precision and powerful cutting by the combination of three -point support by ultra -precision taper roller bearings and double -row cylindrical roller bearings. Adopts a low -speed gear ratio, and a high -torque switch can be obtained by switching in high and low levels.

The main shaft end surface is the No.60 of the outer diameter of 221.44, a large -diameter face mill can be device, the main axis terminal supports the cutter terminal, eliminates the chatter due to the cutter, and has a flywheel effect with a large diameter gear. Combined, stable cutting can be made. NO.50 terminal cutter can also be attached.

■ Standard type head with versatility (15kW main axis rotation 50-2,000rpm)The main axis is a high -precision and powerful processing with a DDB combination of 4 rows of ultra -precision anger shaft and a double -row cylindrical roller bearing. By switching from high and low two -stage gears, a stable torque from high -speed to low -speed processing can be obtained. The main axis is cooled by a lubricating oil temperature adjustment device, forcibly circulating the cooling oil to other heating parts to suppress thermal displacement. The main shaft end surface is No.50 with an outer diameter of 128.57.

Model
There are 5 models for this product.

Product
Easy to use general-purpose aircraft NC small planomillers C-25N/30N

Handling Company
Chuo Seiki Co., Ltd.

Categories

FA Equipment

Numerical Controls (NC)

380+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Easy to use general-purpose aircraft NC small planomillers C-25N/30N

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Total Collection (KVA)	Main axis (mm)	Side front and rear stroke (mm)	Z axis stroke (mm)	Y -axis stroke (mm)	X -axis stroke (mm)	Maximum loading weight (kg)	Machine total weight (kg)	Table width x length (mm)	Hydraulic motor (kw)	Spindle motor (kw)	Spirit shaft motor (kw)	Motor for lubricating oil (W)	Y -axis transfer motor (KW)	Z -axis transfer motor (KW)	T groove width x number (mm)	Spirit shaft lubricant motor (W)	X -axis motor (KW)	Main axis of rotation (RPM)	Side main axis motor (kw)	Distance from the top of the table to the main shaft terminal (mm)	Spirit hole taper	Mainstay end face	Cutting speed (mm/min)	Fast forwarding speed (M/min)	Lubricating oil temperature adjustment motor (W)	Motor for lubrication (W)
C25N-H	Available upon quote	38	110	110	450	1,315	2,500	4,000	12,200	1,000 x 2,400	1.5/4P AC	15/11	15/11	17/2P AC	2.0AC servo	2.0AC servo	20x7	25/2P	3.5AC servo	50 ~ 850 Unmodified	7.5 x 4P	85 ~ 535 (High column: 185 ~ 635mm)	NT No.50	NT No.60	X.Y.Z axis 5,000	X14, Y13, Z7.5	-	-
C25N-HS	Available upon quote	45	110	110	450	1,315	2,500	4,000	13,000	1,000 x 2,400	1.5/4P AC	15/11	15/11	17/2P AC	2.0AC servo	2.0AC servo	20x7	25/2P	3.5AC servo	Standard 40-400 High speed 200 ~ 2,000	7.5 x 4P	85 ~ 535 (High column: 185 ~ 635mm)	NT No.50	NT No.60	X.Y.Z axis 5,000	X14, Y13, Z7.5	-	-
C25N-S	Available upon quote	38	110	110	450	1,315	2,500	4,000	12,200	1,000 x 2,400	1.5/4P AC	15/11	15/11	17/2P AC	2.0AC servo	2.0AC servo	20x7	-	3.5AC servo	50 to 2,000 Unmodified	7.5 x 4P	85 ~ 535 (High column: 185 ~ 635mm)	NT No.50	NT No.60	X.Y.Z axis 5,000	X14, Y13, Z7.5	300 (for compression) 200 (for circulation)	400/2P
C25N-SS	Available upon quote	45	110	110	450	1,315	2,500	4,000	13,000	1,000 x 2,400	1.5/4P AC	15/11	15/11	17/2P AC	2.0AC servo	2.0AC servo	20x7	-	3.5AC servo	Standard 40-400 High speed 200 ~ 2,000	7.5 x 4P	85 ~ 535 (High column: 185 ~ 635mm)	NT No.50	NT No.60	X.Y.Z axis 5,000	X14, Y13, Z7.5	300 (for compression) 200 (for circulation)	400/2P
C30N	Available upon quote	-	110	110	450	1,500	3,000	4,000	-	1,200 x 2,900	1.5/4P AC	30 minutes formation/11	15/11	17/2P AC	2.0AC servo	2.0AC servo	20 × 9	-	4.5AC servo	2 zone	7.5 x 4P	85 ~ 535 (High column: 185 ~ 635mm)	NT No.50	NT No.60	X.Y.Z axis 5,000	X14, Y13, Z7.5	-	-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Gate-type gantry machine 5-axis gate-type machining center FZ37

Tomita Co., Ltd.

170+ people viewing

Last viewed: 16 hours ago

Response time: 19.30 hours

Numerical Controls (NC)

5 models listed

Gate-type gantry machine 5-axis gate-type machining center FZU

Tomita Co., Ltd.

210+ people viewing

Last viewed: 6 hours ago

Response time: 19.30 hours

Numerical Controls (NC)

5 models listed

Horizontal machining center FZH

Tomita Co., Ltd.

140+ people viewing

Last viewed: 18 hours ago

Response time: 19.30 hours

Numerical Controls (NC)

4 models listed

Machine tools A wide world can be realized with "vertical" Smart model of the SavingCenter series Vertical #15 Vertical machining center SV130

Enshu Co., Ltd.

40+ people viewing

Last viewed: 16 hours ago

Numerical Controls (NC)

3 models listed

NC honing machine MX

Nagel Aoba Precision Co., Ltd.

90+ people viewing

Last viewed: 45 minutes ago

Numerical Controls (NC)

6 models listed

Machine Tools High-speed, high-production vertical machining center with outstanding productivity EV450Te

Enshu Co., Ltd.

40+ people viewing

Last viewed: 11 hours ago

Numerical Controls (NC)

3 models listed

Small NC processing machine Wide stroke allows for everything from prototyping to mass production Small NC processing machine Micro MC-1

PMT Co., Ltd.

30+ people viewing

Last viewed: 18 hours ago

Numerical Controls (NC)

3 models listed

Machine tool Vertical machining center EV540

Enshu Co., Ltd.

50+ people viewing

Last viewed: 11 hours ago

Numerical Controls (NC)

3 models listed

NC honing machine MZ

Nagel Aoba Precision Co., Ltd.

70+ people viewing

Last viewed: 3 minutes ago

Numerical Controls (NC)

5 models listed

Small NC processing machine The smallest design in the series, ideal for R&D at universities and research institutes Tabletop NC micro processing machine Micro MC-2

PMT Co., Ltd.

30+ people viewing

Last viewed: 9 hours ago

Numerical Controls (NC)

3 models listed

Machine tool EV360Te, a small vertical machining center that combines productivity and economy

Enshu Co., Ltd.

50+ people viewing

Last viewed: 11 hours ago

Numerical Controls (NC)

3 models listed

Compact NC processing machine Highly rigid CNC micro processing machine Micro MC-3 for precision-oriented microprocessing such as micro hole processing and narrow groove processing

PMT Co., Ltd.

30+ people viewing

Numerical Controls (NC)

3 models listed

See More Numerical Controls (NC) Products

Other products of Chuo Seiki Co., Ltd.

Reviews shown here are reviews of companies.

Rigid improvement up full cover specification Dedicated to the small head dedicated both head processing machine CS300Ⅱ

Chuo Seiki Co., Ltd.

270+ people viewing

Response time: 0.54 hours

Milling Machinery

2 models listed

Contributing to cost reduction by simple operation and autonomous driving CS150 for both head processing machines for accessories

Chuo Seiki Co., Ltd.

140+ people viewing

Response time: 0.54 hours

Milling Machinery

2 models listed

Pallet automatic replacement DAI700Ⅱ / 500Ⅱ

Chuo Seiki Co., Ltd.

280+ people viewing

Response time: 0.54 hours

2 models listed

APC (Pallettable Automatic replacement) double -headed side processing machine DAI800

Chuo Seiki Co., Ltd.

130+ people viewing

Response time: 0.54 hours

Long -shaped, flat -steel material exclusively both head processing machine CL1500α

Chuo Seiki Co., Ltd.

190+ people viewing

Response time: 0.54 hours

Long -size and flat steel dedicated both head processing machines CL1800

Chuo Seiki Co., Ltd.

120+ people viewing

Last viewed: 1 hour ago

Response time: 0.54 hours

High -efficiency processing of right angle processing of large work XY processing machine

Chuo Seiki Co., Ltd.

150+ people viewing

Response time: 0.54 hours

View more products of Chuo Seiki Co., Ltd.

About Company Handling This Product

Chuo Seiki Co., Ltd.

Response Rate

100.0%

Response Time

0.5hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Easy to use general-purpose aircraft NC small planomillers C-25N/30N Chuo Seiki Co., Ltd.

Chuo Seiki Co., Ltd.'s Response Status

About This Product

■ Rigid body structure

■ Operability in pursuit of ease of use

■ Selection suitable for work

■ High torque head for heavy cutting (15kW main axis rotation 50-850rpm (option 18.5kw))

■ Standard type head with versatility (15kW main axis rotation 50-2,000rpm)

5 Models of Easy to use general-purpose aircraft NC small planomillers C-25N/30N

C25N-H

C25N-HS

C25N-S

C25N-SS

C30N

Customers who viewed this product also viewed

Other products of Chuo Seiki Co., Ltd.

About Company Handling This Product

Related search keywords

Easy to use general-purpose aircraft NC small planomillers C-25N/30N
Chuo Seiki Co., Ltd.