Multi -filtered dehydration device Kaspopress
Mitaka Institute of Technology Co., Ltd.
About This Product
■ Two ways to use a full -volume filtration device for waste water treatment, multifunctional multipurpose filter for recycling sludge and recycling liquids.
・ Drainage treatment system equipped with a full auto -type precision filtration device
・ In this system, pre -processing processes (oxidation, reduction, neutralization, etc.) according to each drainage are applied, and precision filtration using a special filter film is performed.
・ There is no leakage of sludge from the filtration solution. The filtered sludge is made into a cake inside the filtration machine, and the automatic machine is fully automatically performed.
・ In addition, operation is easy and maintenance is extremely easy.
・ No condensed equipment, sedimentary equipment, concentrated equipment, sand filtration equipment, and dehydration equipment are not required. Established space -saving, energy saving, and resources.
■ Space saving
・ 1/3 space of the conventional device. -It is composed of chemical processing (pretreatment) and conventional physics processing (condensed precipitation, pressurized, filtration, dehydration, etc.), but MCP performs one of them.
・ I changed the common sense of water treatment. All you need is chemical processing and MCP.
■ Running cost
・ Pharmaceutical fees are drastically reduced than conventional devices, and running costs have been significantly reduced.
・ There is no need for aggregates, precipitating agents, or ascending accelerators.
・ If the drug usage fee is small, the amount of sludge will be reduced, reducing drug costs and sludge collection processing costs.
・ The power required for MCP for normal operation is one filtered pump, and maintenance can be saved.
■ Initial costs saving
Demonstrates effects with simpler capital investment than conventional devices.・ Conventional aggregation precipitation and pressurized equipment are composed of many devices, but no large -scale equipment or maintenance costs are required. With a simple structure, low cost.
■ Relief processing
The stable processing water quality is obtained reliably than the conventional device.・ In order to process all drainage, stable and secure processing water quality under the regulatory value is obtained.
■ Scalability
Increased easily when the drainage volume is increased compared to the conventional device.・ Because the flow is simple, it can be easily handled when the MCP filterboard is added to increase future processing capacity. In addition, the layout change and relocation are easy.
* There are other model numbers.
-
Product
Multi -filtered dehydration device Kaspopress
-
Handling Company
Mitaka Institute of Technology Co., Ltd.
-
Categories
10 Models of Multi -filtered dehydration device Kaspopress
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Effective waste liquid | Processing ability (MAX) | Width x length x height (mm) | type | 沪 room volume | 沪 沪 沪 |
|---|---|---|---|---|---|---|---|---|
|
|
MCP-4020 |
Available upon quote | Super tool grinding solution (water / oil), ceramic grinding solution, wrapping solution, silicon drainage, honing solution, jet scrub polishing solution, printed substrate adjustment, UF, RO concentration liquid, wire cut, etc. Filtration | 30L/min | 600x1,100x1,100 | Manual formula | 20L | 2㎡ |
|
|
MCP-4040 |
Available upon quote | Super tool grinding solution (water / oil), ceramic grinding solution, wrapping solution, silicon drainage, honing solution, jet scrub polishing solution, printed substrate adjustment, UF, RO concentration liquid, wire cut, etc. Filtration | 60L/min | 600x1,500x1,100 | Manual formula | 40L | 4㎡ |
|
|
MCP-4060 |
Available upon quote | Super tool grinding solution (water / oil), ceramic grinding solution, wrapping solution, silicon drainage, honing solution, jet scrub polishing solution, printed substrate adjustment, UF, RO concentration liquid, wire cut, etc. Filtration | 90L/min | 600x1,900x1,100 | Manual formula | 60L | 6㎡ |
|
|
MCP-6050 |
Available upon quote | Super tool grinding solution (water / oil), ceramic grinding solution, wrapping solution, silicon drainage, honing solution, jet scrub polishing solution, printed substrate adjustment, UF, RO concentration liquid, wire cut, etc. Filtration | 75L/min | 850x1,900x1,500 | Manual formula | 50L | 5㎡ |
|
|
MCP-60100 |
Available upon quote | Super tool grinding solution (water / oil), ceramic grinding solution, wrapping solution, silicon drainage, honing solution, jet scrub polishing solution, printed substrate adjustment, UF, RO concentration liquid, wire cut, etc. Filtration | 150L/min | 850x2,300x1,500 | Manual formula | 100L | 10 square meters |
|
|
MCP-60200 |
Available upon quote | Super tool grinding solution (water / oil), ceramic grinding solution, wrapping solution, silicon drainage, honing solution, jet scrub polishing solution, printed substrate adjustment, UF, RO concentration liquid, wire cut, etc. Filtration | 300L/min | 850x2,700x1,500 | Manual formula | 200L | 20 square meters |
|
|
MCP-70100SFA |
Available upon quote | Barrel polishing, painting processing, alumite, peeling drainage, fluoresis invasion drainage, acid, alkaline drainage, various cleaning drains, etc. | 100L/min | 1,800x3,000x2,600 | Fully automatic | 100L | 8㎡ |
|
|
MCP-70200SFA |
Available upon quote | Barrel polishing, painting processing, alumite, peeling drainage, fluoresis invasion drainage, acid, alkaline drainage, various cleaning drains, etc. | 200L/min | 1,800x3,400x2,500 | Fully automatic | 200L | 16㎡ |
|
|
MCP-75180FA |
Available upon quote | Barrel polishing, painting processing, alumite, peeling drainage, fluoresis invasion drainage, acid, alkaline drainage, various cleaning drains, etc. | 200L/min | 1,800x3,000x4,000 | Fully automatic | 175L | 14㎡ |
|
|
MCP-75360FA |
Available upon quote | Barrel polishing, painting processing, alumite, peeling drainage, fluoresis invasion drainage, acid, alkaline drainage, various cleaning drains, etc. | 400L/min | 1,800x3,800x4,000 | Fully automatic | 360L | 28㎡ |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Mitaka Institute of Technology Co., Ltd.
View more products of Mitaka Institute of Technology Co., Ltd.
