All Categories

History

Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-LP-WS1221
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-LP-WS1223
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Logical product Co., Ltd.

Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor
Logical product Co., Ltd.

Logical product Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

1.2hours

Very Fast Response


About This Product

The wireless muscle sensor is an easy and lightweight hydraulic sensor that integrates the wireless and cylindrical electrode circuit. Since it is controlled by wireless, the cable does not limit the freedom of the subject. The measurement data is saved in the built -in memory, and data can be obtained after measurement. Because it has a built -in variable gain amplifier, the sensitivity of the electric electrode sensor can be changed. The built -in rechargeable battery allows 4 hours of operation for a row (100Hz sampling). If you purchase a basic evaluation accessories pack, you can start using it immediately. Of course, it can be used in combination with other products such as small 9 -axis wireless motion sensor. After use, you can connect to a dedicated dock and charge via USB. * Data due to outside disturbance may occur during wireless communication. * This product is only a sensor. The same clock is possible as the other 2.4GHz series.

  • Product

    Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor

Share this product


350+ people viewing

Last viewed: 11 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

8 Models of Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Tremendous number Aerial line power Used temperature range mass resolution Wireless Distance between electrodes Hydraulic amplification rate Internal memory capacity size Frequency characteristic CMRR (the same phase removal ratio) Modulation method Sampling rate power consumption power supply Communication method Law Battery life Acceleration range Acceleration sensitivity
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1221

LP-WS1221

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

32MB, about 0.5 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

- -
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1222

LP-WS1222

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

32MB, about 0.5 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

± 16g

57mv/g

Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1221-W

LP-WS1221-W

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

128MB, about 18 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

- -
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1222-W

LP-WS1222-W

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

128MB, about 4.5 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

± 16g

57mv/g

Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1223

LP-WS1223

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

32MB, about 0.5 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm (not included)

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

- -
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1224

LP-WS1224

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

32MB, about 0.5 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm (not included)

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

± 16g

57mv/g

Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1223-W

LP-WS1223-W

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

128MB, about 18 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm (not included)

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

- -
Easy to handle wireless and muscle electrical electrodes, lightweight 2.4GHz series wireless tensor sensor-Part Number-LP-WS1224-W

LP-WS1224-W

Available upon quote

3

+5dbm or less

About 0 to 40 ° C

0 ~ Power supply voltage (25mA Max), about 15g (including battery weight)

16 -bit

2,405MHz ~ 2,480MHz (5MHz step) IEEE802.15.4/Independent protocol

20mm

250 to 3,000 times, 250 times x1 to 250 times x12 times

128MB, about 4.5 hours (sampling frequency 1kHz)

43mm x 24mm x 12mm (not included)

5.3Hz ~ 442Hz

94db

DS-SS method

Up to 1,000Hz (1Hz to 8 steps)

Up to about 85mW

Dedicated rechargeable battery

USB communication via wireless or communication docks by our data communication device

Wireless equipment construction design certification has been obtained

About 4 hours (100Hz measurement)

± 16g

57mv/g

Click on the part number for more information about each product

Other products of Logical product Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Logical product Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

1.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree