All Categories

History

Logoski coil MFC150-MFC150 3104.0005.0001
Logoski coil MFC150-Algodue Elettronica s.r.l.

Algodue Elettronica s.r.l.'s Response Status

Response Rate

100.0%

Response Time

8.1hours

Fast Response


About This Product

Logoski coil MFC150 (cross section 8mm) is a flexible current transducer based on the logoski principle. MFC150 coils are available in various sizes and can be supplied according to customer design, so that traditional transducers can be used for all applications that do not fit in size and weight. The MFC150 coil has a shield to prevent the effects of external magnetic fields, so it can be stable from low current to several hundred ka. The logo skiil must be connected to an electronic integrator. Our power meter UPM209 and UPM309 can be directly connected to the logo coil without the need for an external integrator (smart kit). This has the advantage that it is easy to use because it does not require an external box or power supply. The MFC150 can also built a category without the need for a 90 ° phase shift compensation or an external device for frequency. This has the advantage of being easier to use because there is no outer box. Our power meter UPM209 and UPM309 can be directly connected to the logo coil without the need for an external integrator (smart kit).

  • Product

    Logoski coil MFC150

Share this product


470+ people viewing

Last viewed: 23 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

7 Models of Logoski coil MFC150

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Transducer coil length Transducer coil diameter Transducer fasteners Transducer weight Transducer material Nominal output rate (model without integrator) Maximum measurement current (model without integrator) Coil resistance (model without integrator) Positioning mistake (model without integrator) Frequency (model without integrator) Over -voltage category (model without integrator) Pollution (model without integrator) Insulated test voltage (model without integrator) Power supply voltage (model with integrator) Maximum power consumption (model with integrator) Nominal output rate (model with integrator) Positioning mistake (model with integrator) Frequency (model with integrator) Overview category (model with integrator) Pollution (model with integrator) Insulated test voltage (model with integrator) Connection cable type (for model without integrator) Connection cable length (for model without integrator) Connection cable type (for model with integrator) Connection cable length (for model with integrator) Operating temperature Storage temperature Protection grade IEC, UL standard
Logoski coil MFC150-Part Number-MFC150 3104.0005.0001

MFC150 3104.0005.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Logoski coil MFC150-Part Number-MFC150 3104.0013.0001

MFC150 3104.0013.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Logoski coil MFC150-Part Number-MFC150 3104.0021.0001

MFC150 3104.0021.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Logoski coil MFC150-Part Number-MFC150 3104.0023.0001

MFC150 3104.0023.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Logoski coil MFC150-Part Number-MFC150 3101.0009.0001

MFC150 3101.0009.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Logoski coil MFC150-Part Number-MFC150/F 3118.0001.0001

MFC150/F 3118.0001.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Logoski coil MFC150-Part Number-MFC150/F 3118.0002.0001

MFC150/F 3118.0002.0001

Available upon quote

25 ~ 300cm

8.3 ± 0.2mm

Bayonet holder

150 ~ 500g

Heat polishing plastic UL94-V0

100mv / ka @ 50Hz (RMS value)

100

70 ~ 900Ω

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

4 to 26VDC

5

333MV / FS (RMS value)
FS varies depending on the model: 1, 2, 5ka

Within ± 1%of the reading value

50/60Hz

1,000V Cat III, 600V CAT IV

2

7,400vrms/5 seconds

3 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

5 x 22 AWG shield

3m. Other requests: 5, 7, 10, 15 m

-30 ℃ ~ +80 ℃

-40 ℃ ~ +80 ℃

IP67 or IP68 according to the model (not evaluated by UL)

UL 61010-1 ED3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1, IEC 60529

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Current Probes Products

Other products of Algodue Elettronica s.r.l.

Reviews shown here are reviews of companies.


View more products of Algodue Elettronica s.r.l.

About Company Handling This Product

Response Rate

100.0%


Response Time

8.1hrs

Company Overview

With over 35 years of experience, Algodue Elettronica has specialized in the design and manufacture of instrum...

See More

  • Italy

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree