All Categories
History
Product
Electronic equipment Time digital converter for TOFHandling Company
Kimball Physics Inc.| Image | Part Number | Price (excluding tax) | PC interface | Number of hits per cycle | Cycle counter reset time | Dead time between cycles | Start/stop input termination (jumper selectable) | Software requirements | Timing accuracy | Timing resolution | Trigger mode | Full speed front end FIFO depth | Benchtop power requirements | Bench top case dimensions | Maximum cycle repetition rate | Maximum timestamp value | Maximum burst count rate | Maximum sustained count rate | Minimum cycle repetition rate (free running) | Minimum cycle repetition rate (external start trigger) | Start/stop input threshold range | Start/stop input range | Power requirements (board standard) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Time digital converter for TOF |
Available upon quote |
About USB2.0 |
Unlimited |
<1μs |
36ns at the beginning of the cycle, 4ns at the end |
50Ω to ground (typical) or 50Ω to -2V (ECL) |
Windows XP or later |
<470ps (500μs peak measured for 1 hour) estimated as 280ps internal trigger and 380ps external trigger |
0.25ns |
Fixed frequency free running or external start trigger |
8192 frames of 4ns |
230/115 VAC 50/60Hz 7 Watts |
280×300×70mm |
≥1MHz (hardware) 200kHz (current software limit) |
0×FFFEFF~4.2ms |
2GHz band |
>17,000,000 counts/sec (theoretical value) >4,000,000 counts/sec (measured value) |
≤20Hz (hardware) 500Hz (current software limit) |
Unlimited |
-2.5V~+2.5V (positive or negative timing edge is software selectable) |
-5V~+5V |
+5V 730mA and -5.2V 65mA |
Reviews shown here are reviews of companies.
