Automation of manual work Aluminum pouring robot-Aluminum pouring robot

Automation of manual work Aluminum pouring robot
Robotmation Co., Ltd.

About This Product

■Features・In addition to the conventional 4-degree-of-freedom robot, a 6-degree-of-freedom robot is used, and by tilting the rod, it is possible to pour into die-cast machines with narrow sprues.
- Using the selection switch on the system control panel (or touch panel hand control panel), you can select the pouring program that matches the mold built into each casting machine.
・You can fine-tune the amount of hot water (hot water pumping) during automatic operation.
- Pouring operation (pouring speed, pouring angle, pouring position) can be adjusted during automatic operation.
- Even if there is an emergency stop during automatic operation (robot trouble, safety fence opening, etc.), after the emergency stop is canceled, the automatic home position return function allows the robot to return to its home position without entering the fence or using the teaching operation panel, and automatic operation can be resumed.
- Improved molten metal level detection program prevents the ladle from being buried in molten metal. In addition, cycle time can be reduced by using high-speed detection and low-speed detection depending on the situation.
・The pouring amount can range from a small 300g piston to a 30kg cylinder head and cylinder block.
・There is a highly sensitive collision detection function (robot option) that detects abnormal torque even in the slightest collision and stops the robot instantly.
- By using ATC, various operations such as removing the workpiece after pouring and maintaining the sprue are possible.
・There are almost no failures even under adverse environmental conditions such as warm atmosphere.
・If the work is continuous for 2 to 3 shifts, it can be depreciated within one year.
・The manufacturer of the robot used will match the customer's requests. (Fanuc robot, Yaskawa Electric motoman experience)