Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121-BK-ERG-121

Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121
Mitsubishi Electric Engineering Co., Ltd.

About This Product

■Strength Ergo 8V2・In order to carry out a safer load test for people with low physical strength, it is essential to have an exercise load starting from 0W and an accurate load that does not depend on the rotation speed.
- AT of about 3 Mets is also available.
・The number of people eligible for load tests will be expanded.

■Strength Ergo 8 featuresAchieves accurate load independent of rotation speed

■Achieve accurate loadUp until now, ergometers have used an eddy current method (electromagnetic control method), but due to their structure, they cannot handle loads near 0W, and the problem is that they tend to change over time. Strength Ergo 8 uses a servo motor system to achieve accurate loads up to 600W. It also automatically adjusts the 0W load periodically.

■Achieving stress tests tailored to the patientAthletes can perform load tests at the athlete's rotational speed, and people with low physical strength can perform load tests at low rotational speeds.

■Load that does not depend on the patient's rowing method is possible [10-110 rotations]Even if the speed of rowing changes during exercise, the torque is controlled to achieve accurate power [W].

■Promoting new physical fitness scienceBy achieving accurate loads under various conditions, including areas where the relationship between exercise speed and metabolism is not clear, we provide a one-step advanced testing environment.

■Need for 0W warming upCardiopulmonary exercise testing (CPX) is widely used to determine the optimal exercise intensity for patients, such as in cardiovascular rehabilitation. The Strength Ergo 8, which can handle 0W loads, makes it easier to determine AT points of 20W or less, which was difficult with conventional ergometers. It also supports 0W warm-up, which is the CPX standard for respiratory disease rehabilitation patients.

■Smooth start functionConventionally, when starting to row an ergometer, a load equivalent to 80W to 100W could be applied due to its eddy current structure, and for elderly people, patients undergoing acute rehabilitation, and for measuring the rise time constant of oxygen uptake, support such as turning the pedals was required for the beginning of rowing. Strength Ergo 8 can smoothly increase the load from 0W to the specified load with the smooth start function.

■Foot weight and oxygen consumptionFrom the passive -50W that is completely turned to the pedals, you gradually generate the energy to turn the pedals yourself. When it's 0W, I'm turning the pedal myself. You can also calculate AT by increasing the power by 10W per minute.

Model
There is 1 model available for this product.

Product
Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121

Handling Company
Mitsubishi Electric Engineering Co., Ltd.

220+ people viewing

Last viewed: 3 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121

Image

Part Number

Price (excluding tax)

Class classification

Saddle part

Torque control mode (constant torque) Load setting range

Handle vertical adjustment range

Handle rotation

Pedal part

Watt control mode (watt constant) Rotation speed control range

Watt control mode (watt constant) load accuracy

Watt control mode (constant watt) load setting range

Operating temperature

Operating humidity

Storage temperature

Storage humidity

Common names for medical devices

Classification of medical devices

Medical device manufacturing and sales approval number

External dimensions

Safety measures

Expiry date (lifetime)

Compliant standards

Types of specified maintenance management medical equipment

Constant speed control mode (constant speed) Torque upper limit

Constant speed control mode (constant speed) Setting speed range

Constant speed control mode (constant speed) Speed stability control

Scope of application

Weight

Type of protection against electric shock

Degree of protection against electric shock

Power supply

Classification of highly controlled medical devices

BK-ERG-121

Available upon quote

Vertical adjustment range 730mm~1,030mm
Electric From the floor to the top of the saddle

0~96N・m (during continuous motion)

880mm~1,100mm 20mm pitch
Manual From the floor to the center of the handle

Fixed every 30deg Manual Radius 200mm

Crank length 170mm
Pedal spacing 216mm
Pedals with straps

10~115rpm
Lower limit can be set

-50~200W±3W
200~400W±6W
400~600W±12W
(60rpm or less)

-50~600W (during exercise stress test)
-50~400W (during continuous motion)

5~35℃

30~80%RH (no condensation)

0~50℃

30~95%RH (no condensation)

Active extension/flexion/extension rotation exercise device

Physical therapy equipment among orthopedic equipment

21900BZX00988000

1,220 (L) × 600 (W) × 1,320 (H) mm

Engine part (upper part): Protective cover
When using assist: Emergency stop button
Other body frames
・Protective cover
・Overrun prevention device

7 years [based on self-certification (our data)]

JIS T 0601-1, JIS T 0601-1-2 (EMC compliant)

Applicable

240N・m

10~110rpm

±3% (F/S)

Allowable height: 140~200cm (there are individual differences)
Allowable weight 135kg

Approximately 95kg (body)
Power cable length 5m

Class I

B type equipment

AC100V 50/60Hz 350VA

Managed medical equipment

Other products of Mitsubishi Electric Engineering Co., Ltd.

Reviews shown here are reviews of companies.

MELSEC-AnS series → MELSEC-Q series analog unit conversion adapter ERNT-ASQT68DA

Mitsubishi Electric Engineering Co., Ltd.

$114.40

190+ people viewing

Last viewed: 20 seconds ago

Response time: 23.18 hours

Signal Converters

Base unit A1S65B=>L series unit replacement base adapter ERNT-ASLB65

Mitsubishi Electric Engineering Co., Ltd.

$60.78

120+ people viewing

Response time: 23.18 hours

MELSEC-AnS series → MELSEC-L series analog unit conversion adapter ERNT-ASLT62DA

Mitsubishi Electric Engineering Co., Ltd.

$71.50

190+ people viewing

Response time: 23.18 hours

Signal Converters

MELSEC-AnS series → MELSEC-Q series Conversion adapter for temperature control unit with disconnection detection function ERNT-ASQT64TCTTBW

Mitsubishi Electric Engineering Co., Ltd.

$214.50

200+ people viewing

Last viewed: 20 seconds ago

Response time: 23.18 hours

Signal Converters

Base unit replacement base adapter ERNT-AQB58N

Mitsubishi Electric Engineering Co., Ltd.

$64.35

160+ people viewing

Last viewed: 1 hour ago

Response time: 23.18 hours

MELSEC-A series → MELSEC iQ-R series output unit conversion adapter ERNT-1AR10AY

Mitsubishi Electric Engineering Co., Ltd.

$133.71

170+ people viewing

Last viewed: 18 hours ago

Response time: 23.18 hours

Adapters

MELSEC-A series → MELSEC-Q series output unit conversion adapter ERNT-AQTY13

Mitsubishi Electric Engineering Co., Ltd.

$133.71

150+ people viewing

Response time: 23.18 hours

Adapters

MELSEC iQ-R series compatible RFID interface unit (2 channel connection product) ER-1V680D2

Mitsubishi Electric Engineering Co., Ltd.

$1,501.50

310+ people viewing

Response time: 23.18 hours

RFID

Analog signal converter Output type Voltage => Voltage Signal conversion module FA-ATSVM1YV010

Mitsubishi Electric Engineering Co., Ltd.

$71.50

160+ people viewing

Response time: 23.18 hours

Signal Converters

Cable with spring clamp terminal block FA2-CB2L30AT4YA1E

Mitsubishi Electric Engineering Co., Ltd.

$85.22

120+ people viewing

Response time: 23.18 hours

Terminal Blocks

2 models listed

Cable with MIL20P connector FA1-CB2L30AT4EX

Mitsubishi Electric Engineering Co., Ltd.

$62.08

150+ people viewing

Last viewed: 23 seconds ago

Response time: 23.18 hours

Connector Cables

Analog signal converter Input type Thermocouple temperature => voltage Signal conversion module FA-ATSVM1XTS

Mitsubishi Electric Engineering Co., Ltd.

$114.40

170+ people viewing

Last viewed: 10 hours ago

Response time: 23.18 hours

Signal Converters

View more products of Mitsubishi Electric Engineering Co., Ltd.

About Company Handling This Product

Mitsubishi Electric Engineering Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121 Mitsubishi Electric Engineering Co., Ltd.

About This Product

■Strength Ergo 8V2

■Strength Ergo 8 features

■Achieve accurate load

■Achieving stress tests tailored to the patient

■Load that does not depend on the patient's rowing method is possible [10-110 rotations]

■Promoting new physical fitness science

■Need for 0W warming up

■Smooth start function

■Foot weight and oxygen consumption

1 Models of Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121

BK-ERG-121

Other products of Mitsubishi Electric Engineering Co., Ltd.

About Company Handling This Product

Medical related equipment Exercise load test ergometer Strength Ergo 8V2 BK-ERG-121
Mitsubishi Electric Engineering Co., Ltd.