All Categories

History

Digital signal converter (terminal unit) Spring type 8-point independent base unit (module mounting type) FA1-TH8X2SC20S1E-FA1-TH8X2SC20S1E
Digital signal converter (terminal unit) Spring type 8-point independent base unit (module mounting type) FA1-TH8X2SC20S1E-Mitsubishi Electric Engineering Co., Ltd.

Digital signal converter (terminal unit) Spring type 8-point independent base unit (module mounting type) FA1-TH8X2SC20S1E
Mitsubishi Electric Engineering Co., Ltd.


About This Product

■Product overview

Digital signal converters (terminal units) convert digital signals (24V DC to 200V AC, etc.) in order to connect control equipment (sequencers) and devices (electromagnetic switches, etc.). One unit can connect loads with different voltages.

■Features 1.

Digital signal converters (terminal units) convert digital signals (24V DC to 200V AC, etc.) in order to connect control equipment (sequencers) and devices (electromagnetic switches, etc.). One unit can connect loads with different voltages.

■Features 2.

Various output modules (relays, triacs, transistors) can be freely combined.

■Feature 3.

If you use a 64-point output unit, you can convert up to 64 points in one slot.

■Feature 4.

Equipped with a socket, so relay modules can be replaced one by one. (Easy maintenance)

■Features 5.

The spring clamp type is a terminal block that does not use screws. Wires can be connected directly to conductive parts using the pressure of the spring clamp, making wiring easy without the need for a driver.

  • Product

    Digital signal converter (terminal unit) Spring type 8-point independent base unit (module mounting type) FA1-TH8X2SC20S1E

Share this product


10+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Digital signal converter (terminal unit) Spring type 8-point independent base unit (module mounting type) FA1-TH8X2SC20S1E

Image Part Number Price (excluding tax) Overvoltage category Cable length Noise tolerance Unit current consumption Operating ambient temperature Ambient humidity Usage altitude Usage atmosphere Storage ambient temperature Storage ambient humidity Operation display External power supply Connection sequencer Connected equipment Connected device series Maximum number of simultaneous ON points Pollution level Score Purpose Deadline Dielectric strength voltage, insulation resistance Vibration resistance (if there is intermittent vibration) 5-84Hz Vibration resistance (if there is intermittent vibration) 84-150Hz Vibration resistance (if there is intermittent vibration) Number of sweeps Vibration resistance (when there is continuous vibration) 5-84Hz Vibration resistance (when there is continuous vibration) 84-150Hz Shockproof Attachable module Product classification Installation location
Digital signal converter (terminal unit) Spring type 8-point independent base unit (module mounting type) FA1-TH8X2SC20S1E-Part Number-FA1-TH8X2SC20S1E

FA1-TH8X2SC20S1E

$ 68.25〜

Inside the control panel

2 or less

Simulator noise 1,500Vp-p, noise width 1us (by noise simulator with noise frequency 25~60Hz)

Approximately 10mA at 24V DC (not including current consumption of installed modules and sequencer)

〇 (prepared product)

-25~75℃

No corrosive gas

147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant)

-20~55℃

5-95%RH (non-condensing)

LED lights up when power is turned on and input is turned on.

DC24V+-10% (ripple rate within 5%, CLASS 2 or SELV+LIM)

Depends on the module installed

Sequencer

MELSEC iQ-R, MELSEC iQ-F, MELSEC-Q, MELSEC-F, MELSEC-L

100% (5-direction installation)

II or below

8 points

Wiring savings/man-hour savings

Spring clamp type

AC2,300Vrms/1min (altitude 0~2,000m), 10MΩ or more

5-95%RH (non-condensing)

Single amplitude 3.5mm

Acceleration 9.8m/s^2

10 times each in X, Y, and Z directions

Single amplitude 1.75mm

Acceleration 4.9m/s^2

AC100V input (photocoupler isolation): FA1-TM1X100A

Digital signal converter (terminal unit)

2,000m or less

Other products of Mitsubishi Electric Engineering Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Mitsubishi Electric Engineering Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree