All Categories
History
Product
Input/output unit e-con, one-touch connector type MELSEC exclusive 16 points 3-wire open type 4-pole type FA-LEB16XY-DHandling Company
Mitsubishi Electric Engineering Co., Ltd.| Image | Part Number | Price (excluding tax) | E-CON connector: 3-pole connector | E-CON connector: Common method | E-CON connector: Applicable wire | Overvoltage category *2 | Unit installation: DIN rail | Operating ambient temperature | Ambient humidity | Usage altitude *1 | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Rated voltage | Connected equipment | Connected device series | Maximum working voltage | Maximum operating current | Pollution level *3 | Purpose | Terminal block type | Terminal block: terminal screw | Terminal block: Applicable wire, tightening torque | Deadline | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA-LEB16XY-D |
$ 20.02〜 |
1P: DC24V, 2P: NC, 3P: 0V, 4P: X/Y |
Common method: 16 points/ (24V) common 16 points + (0V) common 16 points |
0.14~0.5mm2 (AWG#26~20) Finished outer diameter φ0.8~2.0mm (Initial contact resistance: 50mΩ or less) |
II or below |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5AL (based on JIS C 2812) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5~95%RH (no condensation) |
DC24V |
Sequencer |
MELSEC iQ-R, MELSEC-Q, MELSEC-L |
DC28.8V |
1A (each signal terminal), 2A (power terminal) |
2 or less |
Wiring-saving/man-hour saving equipment |
E-CON |
M3 screw, number of terminals: 2P, self-up screw with finger protection cover |
0.3~2mm2 (when using crimp terminals), 58.8~88.2N-cm (6~9kgf-cm) |
〇 (prepared product) |
Single amplitude 3.5mm |
Acceleration 9.8m/s^22 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s^22 |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block for sequencer |
Inside the control panel |
Reviews shown here are reviews of companies.
