All Categories
History
Product
Analog signal converter input/output type signal through module FA-ATFTMXYHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category *2 | Operating ambient temperature | Ambient humidity | Usage altitude *1 | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Input: input resistance | Input: Resistor temperature characteristics | Input: Resistor accuracy | Connected equipment | Connected device series | Number of packages | Pollution level *3 | Score | Purpose | Terminal block type | Deadline | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location | Allowable input/output signals | Mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA-ATFTMXY |
$ 35.75〜 |
II or below |
0~55℃ |
5-95%RH (non-condensing) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5-95%RH (non-condensing) |
During signal through: -, during current → voltage conversion *: 250Ω |
During signal through: -, during current → voltage conversion *: +-0.0025%/℃ or less |
During signal through: -, during current → voltage conversion *: +-0.1% or less |
Sequencer |
MELSEC iQ-R, MELSEC-Q, MELSEC-L |
1 piece |
2 or less |
1 point (1 channel) |
Wiring-saving/man-hour saving equipment |
Screw terminal type |
〇 (prepared product) |
Single amplitude 3.5mm |
Acceleration 9.8m/s^2 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s^2 |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Analog signal converter |
Inside the control panel |
Voltage: 10V or less, current: 20mA or less |
Approximately 30g |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
