Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH-RTS-30-S3OH

Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH
Shinko Electric Co., Ltd.

About This Product

■Features・By electrically detecting and determining the welding of the contacts of a contactor (magnetic contactor) and outputting a relay contact, it is possible to shut off the power and prevent a situation that could lead to a runaway crane/hoist accident if left unchecked.
In addition to the above, the OH type detects contact failure, and the SKO type detects operation cable interference.
・Both the sensor section and control section are electrical/electronic circuits that do not require mechanical operation, consume little power, and are highly reliable.
・This series of EleCut allows you to create simulated working conditions using push-button switches and easily inspect operation without having to climb on a crane or hoist.
However, the above inspection may not be possible when operating wirelessly or transmitting signals using a trolley wire.
・Elecut has two types: inspection function display type (flat type and vertical type) and built-in terminal type.
By selecting according to the usage situation, specifications, and conditions, it is possible to easily install it not only in new installations but also in existing equipment.
・In addition to the direct effect of preventing accidents, operation and maintenance costs as a safety device are extremely low, and it has a large economic and psychological effect on the efficient operation of the entire system.

Model
There is 1 model available for this product.

Product
Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH

Handling Company
Shinko Electric Co., Ltd.

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH

Image	Part Number	Price (excluding tax)	Installation environment	Method	Main case material and color	Body weight (g)	Number of detection circuits	Detection error	Power consumption	Load sensor primary circuit voltage	Current value on the primary side of the load sensor	Power supply voltage	Accessories
	RTS-30-S3OH	Available upon quote	Temperature: 0~55℃ Humidity: 85% or less No condensation or freezing Elecut main body and load sensor must be installed in the same control panel.	Inspection function Display method: Vertical type	Material: ABS resin Color: black	700	3	Contact welding: Can be set to 0.4 seconds or 1 second using the dip switch (DS) installed inside the main unit. Poor contact: Fixed at 2 seconds.	5 VA or less	AC 600V or less	Load sensor: CTL-W Current detection range: AC 1.0AT~160AT Range where current is not detected: AC 0AT~0.2AT	AC 100V~AC 220V 50~60Hz Free voltage input specification	Load sensor: CTL-W (weight: 230g) 3 pieces

Other products of Shinko Electric Co., Ltd.

Reviews shown here are reviews of companies.

Easy construction with aluminum rail SDM rail system SDM-R1 curved rail

Shinko Electric Co., Ltd.

40+ people viewing

Easy construction with aluminum rail SDM rail system SDM running case R1

Shinko Electric Co., Ltd.

30+ people viewing

Crane hoist current collector Current collector club collector SCC type

Shinko Electric Co., Ltd.

80+ people viewing

Current Collectors

Push button switch for operating cranes and hoists For low current operation Push button switch for low current operation SBN-2-WG

Shinko Electric Co., Ltd.

40+ people viewing

Pushbutton Switches

2 models listed

Easy construction with aluminum rail SDM rail system Rail with SDM removal port R1

Shinko Electric Co., Ltd.

60+ people viewing

Last viewed: 19 hours ago

Easy construction with aluminum rail SDM rail system SDM running case R2

Shinko Electric Co., Ltd.

30+ people viewing

Last viewed: 21 hours ago

Crane hoist current collector Current collector Main trolley collector SCM type

Shinko Electric Co., Ltd.

60+ people viewing

Current Collectors

SBN type for push button switch operation circuit (indirect operation) for operating cranes and hoists

Shinko Electric Co., Ltd.

50+ people viewing

Last viewed: 8 hours ago

Pushbutton Switches

2 models listed

Push button switch for operating cranes and hoists For low current operation Push button switch for low current operation SBNY-WG

Shinko Electric Co., Ltd.

40+ people viewing

Pushbutton Switches

2 models listed

Easy construction with aluminum rail SDM rail system Rail with SDM removal port R2

Shinko Electric Co., Ltd.

20+ people viewing

Cable hanger for cables, air tools, and hose hangers

Shinko Electric Co., Ltd.

40+ people viewing

View more products of Shinko Electric Co., Ltd.

About Company Handling This Product

Shinko Electric Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH Shinko Electric Co., Ltd.

About This Product

■Features

1 Models of Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH

RTS-30-S3OH

Other products of Shinko Electric Co., Ltd.

About Company Handling This Product

Elecut AC operated magnetic contactor contact welding and poor contact detection O (O) series S3OH
Shinko Electric Co., Ltd.