All Categories
History
Product
FA device, laser marker/welding machine Static electricity countermeasure equipment (ionizer) Ultra-compact ionizer [high frequency AC method] ER-VS02Handling Company
Panasonic Industry Co., Ltd.Categories
Image | Part Number | Price (excluding tax) | Ion balance | Error output (ERROR) | Error output (ERROR) output operation | Error output (ERROR) short circuit protection | Ozone generation amount | Cable | Check output (CHECK) | Check output (CHECK) output operation | Check output (CHECK) short circuit protection | Reset input (RESET) | Applied pressure range | Fluid used | Supply air flow rate | Discharge stop input (DSC OFF) | Discharge output voltage | Discharge method | Material | Current consumption | Environmental resistance Operating ambient temperature | Environmental resistance Ambient humidity | Environmental resistance Vibration resistance | Indicator light error (ERROR) | Indicator light check (CHECK) | Indicator light discharge (DSC) | Indicator light Power (POWER) | Mass | Compliance regulations and certifications | Static neutralization time (±1,000V→±100V) | Power supply voltage | Accessories |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
ER-VS02 |
Available upon quote |
±10V or less |
NPN transistor open collector |
OFF when abnormal discharge is detected, ON when normal |
Equipment |
0.03ppm or less |
Comes with 0.5m cable with connector |
NPN transistor open collector |
Turns ON when dirt, wear, etc. on the discharge needle is detected continuously for 1.5 seconds or more, and turns OFF when normal. |
Equipment |
If the discharge circuit is stopped due to abnormal discharge detection, the stoppage of the discharge circuit will be canceled by shorting the power supply to 0V and then opening it. |
0.05~0.5MPa |
Air (dry clean air) |
500 ℓ/min. (ANR) or less |
Short circuit to 0V: Discharge stopped |
Approximately 2,000V |
High frequency AC method |
Case: PPS, cover: stainless steel, discharge needle: tungsten |
70mA or less |
0~+55℃ (However, no condensation) |
35~65%RH |
Durability 10~150Hz Double amplitude 0.75mm 2 hours each in XYZ directions |
Red LED (lights up when abnormal discharge is detected) |
Orange LED (lights up when detecting dirt or wear on the discharge needle) |
Green LED (lights up when discharging) |
Green LED (lights up when power is applied) |
Body mass: Approx. 120g |
CE marking (EMC directive, RoHS directive), UKCA marking (EMC regulation, RoHS regulation), TÜV SÜD certification (USA/Canada) |
1 second or less |
24V DC±10% |
Wiring connector [Molex: housing (5557-08R), terminal (5556TL)]: 1 set |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.