All Categories

History

FA sensor Special purpose sensor Pipe-mounted liquid level detection sensor [Built-in amplifier] EX-F1-EX-F1
FA sensor Special purpose sensor Pipe-mounted liquid level detection sensor [Built-in amplifier] EX-F1-Panasonic Industry Co., Ltd.

FA sensor Special purpose sensor Pipe-mounted liquid level detection sensor [Built-in amplifier] EX-F1
Panasonic Industry Co., Ltd.


About This Product

basic information

■Liquid level detection sensor with built-in low-price amplifier

CE and UKCA certified. (CE: EMC Directive UKCA: EMC Regulation) Features

■Built-in amplifier saves space

Since it has a built-in amplifier, there is no need to install the amplifier section and head section separately, saving space.

■Low price

Achieving low price. Contributes to reducing equipment costs.

■Equipped with an easy-to-read operation indicator light

Equipped with an operation indicator that allows you to check the detection status from a wide range.

■Easy installation, easy adjustment

It can be easily attached to a pipe by simply tightening it with a cable tie. In addition, when readjusting the mounting position, the mounting position adjustment lever allows you to easily readjust the mounting position without cutting the cable ties.

■Equipped with an output operation selector switch

Can be switched to ON when liquid is detected/ON when no liquid is detected. Since the output operation can be switched even when there is no liquid, it is also useful for checking operation when assembling the device.

■Detection principle

If there is no liquid inside the pipe, there is a large difference in refractive index between the pipe and the air, so light reflects off the pipe's inner wall and enters the light receiving section. If there is liquid inside the pipe, the difference in refractive index between the pipe and the liquid is small, so light enters the liquid and does not enter the light receiving section.

■Applications

Water tank liquid level detection

  • Product

    FA sensor Special purpose sensor Pipe-mounted liquid level detection sensor [Built-in amplifier] EX-F1

Share this product


20+ people viewing

Last viewed: 15 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of FA sensor Special purpose sensor Pipe-mounted liquid level detection sensor [Built-in amplifier] EX-F1

Image Part Number Price (excluding tax) Cable Cable extension Output NPN transistor open collector Output short circuit protection Output operation Operation indicator light Response time Light emitting element Material Detected object Current consumption Environmental resistance Operating ambient temperature Environmental resistance Ambient humidity Environmental resistance Ambient illuminance Environmental resistance Insulation resistance Environmental resistance Vibration resistance Environmental resistance Impact resistance Environmental resistance Voltage resistance Mass Applicable pipe diameter Power supply voltage Accessories
FA sensor Special purpose sensor Pipe-mounted liquid level detection sensor [Built-in amplifier] EX-F1-Part Number-EX-F1

EX-F1

Available upon quote

0.1mm2 3-core cabtyre cable 1m included

Can be extended to a total length of 50m with a cable of 0.3mm2 or more

・Maximum inflow current: 100mA
・Applied voltage: 30V DC or less (between output and 0V)
・Residual voltage: 1V or less (at inflow current of 100mA) 0.4V or less (at inflow current of 16mA)

Equipment

ON when liquid is present/ON when there is no liquid Select with selector switch

Red LED (lights up when output is ON)

2ms or less

Infrared LED (modulated)

Case: polycarbonate, cable tie: nylon,
Anti-slip tube: silicone

Liquid

30mA or less

-10~+55℃ (no condensation or freezing), Storage: -20~+70℃

35~85%RH, during storage: 35~85%RH

Incandescent lamp: Light receiving surface illuminance 3,000ℓx or less

20MΩ or more at DC250V megger, between all charging parts and case

Durability 10~150Hz Double amplitude 0.75mm 2 hours each in XYZ directions

Durability 100m/s2 (approx. 10G) 3 times in each direction of XYZ

AC1,000V for 1 minute, all live parts and between cases

Body weight: Approx. 15g, Packing weight: Approx. 60g

Outer diameter ø6~ø13mm transparent resin pipe
[Pipe with PFA (fluororesin) or equivalent transparency, wall thickness 1mm]

12~24V DC±10% Ripple P-P 10% or less

Cable ties: 2 pieces, anti-slip tubes: 2 pieces

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Liquid Level Sensors Products

Other products of Panasonic Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Panasonic Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree