All Categories

History

FA sensor Area sensor Small picking sensor NA1-PK3-NA1-PK3
FA sensor Area sensor Small picking sensor NA1-PK3-Panasonic Industry Co., Ltd.

FA sensor Area sensor Small picking sensor NA1-PK3
Panasonic Industry Co., Ltd.


About This Product

basic information

■Ultra-compact lighter-sized body allows installation in narrow spaces

Obtained UL, CE, UKCA. (UL: Recognition certified) Features

■Writer size that does not take up much space

Ultra-compact size of W24 x H70 x D8mm. It can be installed even in a small space in a parts box.

■Uses a large, bright and easy-to-read work instruction light

Equipped with a work instruction light approximately 50mm wide on an ultra-compact body. It's bright and easy to see, so you can check it easily even from a distance.

■No need for synchronization line

Synchro beam scanning method eliminates the need for synchronization lines. Wiring man-hours can be reduced. In addition, since it can be switched to three different light emission frequencies without the need for a synchronization line, up to three sets can be mounted vertically in close contact. There is no malfunction due to mutual interference even with multi-tier component shelves. (Up to 2 sets for horizontal close installation)

■Output operation can be switched

Output operation can be selected according to the application

■Sensor protection metal fittings available

Protective fittings are available to protect the sensor from collisions with tools, etc. (sold separately). The black coating also helps improve the visibility of work indicator lights.

■Easy to design

Design is easy because the mounting hole and optical axis are aligned in a straight line at the center of the product. Installation can be done easily by installing M4 nuts.

■Cable can be pulled out in two directions

The cable can be pulled out in two directions, the side and the bottom, allowing for flexibility depending on the sensor installation situation.

■Applications

・Cell production line ・Assembly line

  • Product

    FA sensor Area sensor Small picking sensor NA1-PK3

Share this product


30+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of FA sensor Area sensor Small picking sensor NA1-PK3

Image Part Number Price (excluding tax) Cable Cable extension Optical axis pitch Number of optical axes Output NPN transistor open collector Output short circuit protection Output operation Interference prevention function Response time Light emitting element Material Detection width Detected object Detection distance Current consumption Environmental resistance Operating ambient temperature Environmental resistance Ambient humidity Environmental resistance Ambient illuminance Environmental resistance Protective structure Environmental resistance Insulation resistance Environmental resistance Vibration resistance Environmental resistance Impact resistance Environmental resistance Voltage resistance Indicator light receiver Indicator light floodlight Mass Power supply voltage
FA sensor Area sensor Small picking sensor NA1-PK3-Part Number-NA1-PK3

NA1-PK3

Available upon quote

0.2mm2 4-core (3-core for floodlight) Comes with 2m oil-resistant cabtyre cable

The total length of the emitter and receiver can be extended up to 100m using a cable of 0.3mm2 or more.

24.6mm

3 optical axes

・Maximum inflow current: 100mA
・Applied voltage: 30V DC or less
(Between output and 0V)
・Residual voltage: 1V or less (at inflow current of 100mA) 0.4V or less (at inflow current of 16mA)

Equipment

Select ON or OFF when one or more optical axis is blocked using the selector switch

Equipment (up to 3 units can be installed closely together)

10ms or less (when using interference prevention function: 30ms or less)

Infrared LED (synchronous beam scanning method)

Case: Heat-resistant ABS, Lens cover: Acrylic, Display cover: Acrylic

49.2mm

Opaque object with a diameter of 29 mm or more (completely light-shielding object)

30~300mm

Emitter: 30mA or less, receiver: 50mA or less

-10~+55℃ (no condensation or freezing), Storage: -20~+70℃

35~85%RH, during storage: 35~85%RH

Incandescent lamp: Light receiving surface illuminance 3,000ℓx or less

IP62 (IEC), drip-proof

20MΩ or more at DC250V megger, between all charging parts and case

Durability 10~150Hz Double amplitude 0.75mm 2 hours each in XYZ directions

Durability 500m/s2 (approx. 50G) 3 times in each direction of XYZ

AC1,000V for 1 minute, all live parts and between cases

Operation indicator: Red LED (lights up when output is ON)
Stable light reception indicator: Green LED (lights up when all optical axes receive stable light)
Work instruction light: Orange LED (lights up when work instruction light input is low)

Power indicator: Green LED (lights up when power is applied)
Work instruction light: Orange LED (lights up when work instruction light input is low)

Body mass: Emitter and receiver approximately 50g each

12~24V DC±10% Ripple P-P 10% or less

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Safety Devices Products

Other products of Panasonic Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Panasonic Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree