All Categories

History

FA sensor Fiber sensor Digital fiber sensor FX-550L-FX-551L3-P-C2
FA sensor Fiber sensor Digital fiber sensor FX-550L-Panasonic Industry Co., Ltd.

FA sensor Fiber sensor Digital fiber sensor FX-550L
Panasonic Industry Co., Ltd.


About This Product

basic information

■Reducing the burden of data analysis, IoT starts with a small step. IO-Link compatible/self-monitoring type

CE and UKCA certified. Features

■Reducing the burden of data analysis, IoT starts with a small step. IO-Link compatible Collects sensor level data

On-site data collected and accumulated for "preventive maintenance" and "operation monitoring". Analyzing this data requires advanced know-how and time, which is a burden on production sites. Panasonic Industry's "Self-Monitoring Sensor" sends sensor data to the upper layer via IO-Link, and also communicates the sensor's own "status" to the upper layer, reducing the amount of data collected and the burden of data analysis.

■Detection distance up to 1.6 times. Extra sensing distance even with small diameter fibers

Achieved approx. 1.6 times the efficiency with a small-diameter reflective fiber (approximately 1.4 times with a standard reflective fiber) compared to conventional products. Installation margin is improved.

■Increased amount of incident light realizes stable detection

If the hysteresis (hysteresis) is the same, the larger the amount of incident light, the more stable detection will be possible.

■Easy to adjust optical axis

Since the detection power is strong, there is no need to worry even if the optical axis is slightly misaligned. It can also be used in the field* of dust and dirt and for detection through extremely small slits. *On-site confirmation is required.

■Equipped with ambient light countermeasure mode. Less affected by ambient light

If you set the light emission frequency to environment-resistant mode, the ambient illuminance withstand for LED bulb light sources will be approximately 2.5 times higher than normal, reducing malfunctions.

■Streamlined functions and improved operability

From the FX-500 series, only general-purpose functions are retained and ease of use is prioritized. We have tried to improve ease of use.

■MODE NAVI + Direct Setting

MODE NAVI shows the basic operation items of the sensor using three indicator lights and two screens. We have achieved operability that is easy to understand, even for first-time users, which operation mode is currently set.

  • Product

    FA sensor Fiber sensor Digital fiber sensor FX-550L

Share this product


20+ people viewing

Last viewed: 21 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of FA sensor Fiber sensor Digital fiber sensor FX-550L

Image Part Number Price (excluding tax) Cable Cable extension Timer time Timer function Operating ambient temperature Protective structure Incident light amount display range Output operation Control output (DO) Light receiving sensitivity setting Response time Sensitivity setting method Light emitter (modulation type) Material Power consumption Different frequency interference prevention function Short circuit protection Mass Communication output (C/Q) IO-LINK communication Communication output (C/Q) process data Communication output (C/Q) transmission speed Communication output (C/Q) minimum cycle time Compliance regulations Power supply voltage
FA sensor Fiber sensor Digital fiber sensor FX-550L-Part Number-FX-551L3-P-C2

FX-551L3-P-C2

Available upon quote

0.2mm2 4-core cabtyre cable 2m included

Can be extended to a total length of 20m (less than 20m when CE mark compliant) with a cable of 0.3mm2 or more
(However, the power supply voltage must be 12V DC or higher)

Approximately 0.1~999.9ms, approximately 0.1ms units

Off-delay timer/on-delay timer/one-shot timer, enable/disable switchable, variable timer time

-10~+55℃ (When 4~7 devices are in close contact: -10~+50℃, When 8~16 devices are in close contact: -10~+45℃)
(However, no condensation or freezing), storage: -20~+70℃

IP40 (IEC)

STD: 0~4,000, LONG: 0~8,000, U-LG/HYPR: 0~9,999

ON when receiving light / ON when not receiving light Switch in L/D mode

PNP transistor open collector
• Maximum drain current: 50mA
• Applied voltage: 30V DC or less (between control output and +V)
• Residual voltage: 2V or less (at maximum outflow current)

Equipment, 4 stages

STD: 250μs or less, LONG: 2ms or less, U-LG: 4ms or less, HYPR: 24ms or less Switchable

2-point teaching / limit teaching / fully automatic teaching / manual adjustment

Red LED (emission peak wavelength: 660nm)

Case, cover: polycarbonate, switch: polyacetal

Normal: 960mW or less (current consumption 40mA or less when power supply voltage is 24V)
In ECO mode: 720mW or less (current consumption 30mA or less when power supply voltage is 24V)

Equipment (up to 4 units). Each setting has a different response time.
F-1: 0.8ms or less / F-2: 0.9ms or less / F-3: 1.0ms or less / F-4: 1.7ms or less

Equipment

Body weight: approx. 55g, packaging weight: approx. 80g

IO-Link Specification V1.1

4byte

COM3 (230.4kbps)

1.0ms

CE marking (EMC directive, RoHS directive), UKCA marking (EMC regulation, RoHS regulation)

12~24V DC+10-15% Ripple P-P 10% or less

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Fiber Optic Sensors Products

Other products of Panasonic Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Panasonic Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree