All Categories

History

FA sensor Fiber sensor Digital fiber sensor FX-300-FX-301 (-C1)
FA sensor Fiber sensor Digital fiber sensor FX-300-Panasonic Industry Co., Ltd.

FA sensor Fiber sensor Digital fiber sensor FX-300
Panasonic Industry Co., Ltd.


About This Product

basic information

■Achieved further evolution and significantly improved detection performance

Obtained UL, CE, UKCA. (CE: EMC Directive UL: Recognition certification (excluding cable type) Features

■MODE NAVI that even beginners can use

MODE NAVI shows the basic operation items of the sensor in six displays. You can see at a glance which operation mode is currently set, so even first-time users can easily operate it without getting confused.

■Easy to check threshold value

Even in RUN mode, you can check the threshold by flipping the jog switch.

  • Product

    FA sensor Fiber sensor Digital fiber sensor FX-300

Share this product


10+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of FA sensor Fiber sensor Digital fiber sensor FX-300

Image Part Number Price (excluding tax) MODE indicator light Timer function Digital display Output NPN output type Output PNP output type Output short circuit protection Output operation Operation indicator light Stability indicator light Response time Sensitivity setting method Light emitter (modulation type) Variable light output function Connection method Material Power consumption Light emitting device (modulation type) Light peak wavelength Environmental resistance Operating ambient temperature Environmental resistance Ambient humidity Environmental resistance Ambient illuminance Environmental resistance Insulation resistance Environmental resistance Vibration resistance Environmental resistance Impact resistance Environmental resistance Voltage resistance Automatic interference prevention function Setting sensitivity fine adjustment function Mass Wiring length Power supply voltage Accessories
FA sensor Fiber sensor Digital fiber sensor FX-300-Part Number-FX-301 (-C1)

FX-301 (-C1)

Available upon quote

RUN: Green LED, TEACH/ADJ/L/D/TIMER/PRO: Yellow LED

Equipped with variable on-delay timer/off-delay timer/one-shot timer
Enable/disable switching type
[Timer time: red light type approx. 0.5ms, 1~9,999ms (blue light, green light, infrared light type approx. 0.5~500ms)

4-digit red LED display

NPN transistor open collector
・Maximum inflow current: 100mA (50mA if 5 or more units are connected)
・Applied voltage: 30V DC or less (between output and 0V)
・Residual voltage: 1.5V or less

PNP transistor open collector
・Maximum outflow current: 100mA (50mA when connecting 5 or more units)
・Applied voltage: 30V DC or less (between output and +V)
・Residual voltage: 1.5V or less

Equipment

ON when receiving light/ON when not receiving light Select with jog switch

Orange LED (lights up when output is ON)

Green LED (lights up when stable light is received, when stable light is not received)

65μs or less [H-SP (red light type only)], 150μs or less (FAST), 250μs or less [STD/S-D (red light type only)], 2ms or less (LONG) Select with jog switch

2-point teaching/limit teaching/manual adjustment/full auto teaching/maximum sensitivity teaching

Red LED

Equipment (red light type only)
FAST, STD, LONG: 4 stages,
H-SP: 3 stages,
S-D: 2 stages

Connector connection type
[FX-301 (P) -C1 comes with 0.15mm2 3-core cabtyre cable 1m]

Case: Heat-resistant ABS, Case cover: Polycarbonate, MODE key: Acrylic,
Jog switch: Heat-resistant ABS (FX-301B/G/H is acrylic)

Red light/infrared light type
Normal: 960mW or less
When ECO mode is selected: 600mW or less

Blue light/green light type
Normal: 720mW or less
When ECO mode is selected: 430mW or less

650nm

-10~+55℃ (4~7 devices in close contact: -10~+50℃, 8~16 devices in close contact: -10~+45℃) (However, no condensation or freezing), Storage: -20~+70℃

35~85%RH, during storage: 35~85%RH

Incandescent lamp: Light receiving surface illuminance 3,000ℓx or less

20MΩ or more at DC250V megger, between all charging parts and case

Durability 10~150Hz Double amplitude 0.75mm 2 hours each in XYZ directions

Durability 98m/s2 (approx. 10G) 5 times in each direction of XYZ

AC1,000V for 1 minute, all live parts and between cases

Equipment
(Up to 4 sets of fibers can be installed closely. However, up to 2 sets in H-SP mode)

Equipment

Body mass: Approx. 20g [Cable type FX-301 (P) -C1 is approx. 60g],
Packing weight: Approx. 25g [Cable type FX-301 (P) -C1 is approx. 65g]

Total length 100m with cable of 0.3mm2 or more
(When adding 5 to 8 units: 50 m, When adding 9 to 16 units: 20 m) Possible.

12~24V DC±10% Ripple P-P 10% or less

FX-MB1
(Amplifier protection seal): 1 set

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Fiber Optic Sensors Products

Other products of Panasonic Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Panasonic Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree