All Categories

History

Bearing inspection equipment Anderon calibrator ADC-101-ADC-101
Bearing inspection equipment Anderon calibrator ADC-101-Sugawara Laboratories Inc.

Bearing inspection equipment Anderon calibrator ADC-101
Sugawara Laboratories Inc.


About This Product

Anderon Calibrator ADC-101 is a device for calibrating the analyzer of bearing inspection equipment. Calibrate by outputting a voltage signal corresponding to Anderon Waviness vibration to the analyzer. It integrates the functionality of traditional calibrators, so you can calibrate all bearing inspection equipment analyzers with this single unit. It also has the ability to output bearing measurement data saved on a USB memory using the analyzer ADA-105/SWA-105 to other analyzers as a voltage signal.

■Calibration method

Set the Anderon Waviness measurement conditions and measured values ​​on the ADC-101, and output the calibration voltage signal to the analyzer. If the values ​​set on the ADC-101 are displayed correctly, you can confirm that the analyzer is operating normally.

■Calibrates analyzers for all bearing inspection equipment in two modes

ADC-101 has two calibration modes. Please select the mode according to the analyzer you are using. ・ADC/SWC mode: Has the function of replacing the conventional ADC-10 and SWC-10. Measurement unit: Anderon, nm/sec, um/sec, uinch/sec, cm/s2, mG, nm, um, uinch, nmWcla, uWcla, nmPC, uPC, nm/rad, um/rad, uinch/rad ・OSC/ATT mode: Has the function of replacing the conventional signal generator + attenuator EBV-AN01, FOR-102, and DOM-101.

■Equipped with a playback function of measured vibration data

In addition to the calibration function, it is equipped with a PLAYER mode that allows you to output measured vibration data saved on a USB memory using the analyzer ADA-105/SWA-105 to other analyzers and play it back. This makes it possible to easily transfer and reproduce measured vibration data. *PLAYER mode is only valid when USB memory is inserted.

■Equipment to be calibrated

・Bearing vibration measurement device with input impedance of 30Ω and voltage signal input type ・Anderon analyzer, Anderon meter display section ADA-* ・Synchronized wave analyzer SWA-* ・Lace wave meter display section LWA-* ・Ball wavimeter display section BWA-*

  • Product

    Bearing inspection equipment Anderon calibrator ADC-101

Share this product


20+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Bearing inspection equipment Anderon calibrator ADC-101

Image Part Number Price (excluding tax) ATT settings Sensor sensitivity setting Output impedance Output level Rotation speed setting Dimensions/mass Operation Oscillation frequency Power supply
Bearing inspection equipment Anderon calibrator ADC-101-Part Number-ADC-101

ADC-101

Available upon quote

ATT= (0~60) + (0~9) + (0.0~0.9) dB
Output level = 1Vrms - (41+ATT) dB

0~8.008Vs/m (0~99.99mV/USP (USP=12.486mm/s))

30Ω

Maximum 4.5mVrms at 30Ω input impedance

100~9,999r/min

215 (W) × 124 (H) × 250 (D) mm, 5Kg

Touch panel operation with 7-inch color LCD

0~20kHz

100~240VAC, 50/60Hz

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Calibrators Products

Other products of Sugawara Laboratories Inc.

Reviews shown here are reviews of companies.


View more products of Sugawara Laboratories Inc.

About Company Handling This Product

Company Overview

Sugawara Laboratories Inc. established in August 1954 and based in Kawasaki-shi, Kanagawa, Japan, is a manufac...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree