All Categories

History

3V to 5.5V, 1A to 5A current limit switch MP5017A with overvoltage clamp and reverse blocking in QFN-12 package-MP5017A
3V to 5.5V, 1A to 5A current limit switch MP5017A with overvoltage clamp and reverse blocking in QFN-12 package-Monolithic Power Systems, Inc.

3V to 5.5V, 1A to 5A current limit switch MP5017A with overvoltage clamp and reverse blocking in QFN-12 package
Monolithic Power Systems, Inc.


About This Product

■Summary

The MP5017A is a protection device designed to protect output circuitry from input transients. It also protects the input from unwanted shorts and transients at the output. During start-up, inrush current is controlled by limiting the output slew rate. The slew rate is controlled by a small capacitor connected to the DV/DT pin. Maximum output load is current limited. The magnitude of the current limit (ILIMIT) is controlled by an external resistor connected between the ILIMIT and GND pins. By controlling the gate voltage through a pair of N-channel MOSFETs, any current flowing from the output to the input is blocked. Undervoltage lockout (UVLO) protection ensures that inputs are above minimum operating thresholds before the device starts. When the input voltage (VIN) exceeds 5.8V, the output voltage (VOUT) is limited to 5.8V. The SAS/OV pin programs the VIN overvoltage protection (OVP) threshold. The FAULT pin is an open-drain output that goes low when an overcurrent (OC), overtemperature (OT), or output overvoltage (OV) fault is detected. MP5017A is available in a QFN-12 (2mm x 3mm) package.

■Features and benefits

・Wide operating input voltage (VIN) range from 3V to 5.5V ・16V absolute maximum VIN ・Output discharge - SAS/OV is disabled to support DEVSLP or POWER_DOWN ・8V high-speed output overvoltage protection (OVP) response ・Reverse current cutoff ・Integrated 45mΩ RDS (ON) power MOSFET ・Adjustable current limit via ILIMIT (ILIMIT) ・Low quiescent current (IQ) of 210μA ・Configurable soft start time (tSS) via DV/DT ・Fast response with hard short protection - Fault indication for overcurrent (OC), overtemperature (OT), and output overvoltage (OV) conditions ・Over-temperature protection (OTP) automatic retry with 76ms recovery delay ・Provided in QFN-12 (2mm x 3mm) package

■Available product numbers

・MP5017AGD-Z MP5017AGD-P ・Part numbers ending in P and Z are the same part. P and Z indicate reel size only

  • Product

    3V to 5.5V, 1A to 5A current limit switch MP5017A with overvoltage clamp and reverse blocking in QFN-12 package

Share this product


30+ people viewing

Last viewed: 15 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of 3V to 5.5V, 1A to 5A current limit switch MP5017A with overvoltage clamp and reverse blocking in QFN-12 package

Image Part Number Price (excluding tax) Channels Enable Ilimit (A) Iout (max) (A) Iq (typ) (µA) Rds (on) (mΩ) Slew Rate Control Special Features Grade Package (mm) Input voltage (max) (V) Input voltage (min) (V)
3V to 5.5V, 1A to 5A current limit switch MP5017A with overvoltage clamp and reverse blocking in QFN-12 package-Part Number-MP5017A

MP5017A

Available upon quote

1

Active High

Prog.

5

210

45

Yes

Reverse-Current Blocking

Catalog

QFN-12 (2x3)

5.5

3

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Power Supply Modules Products

Other products of Monolithic Power Systems, Inc.

Reviews shown here are reviews of companies.


View more products of Monolithic Power Systems, Inc.

About Company Handling This Product

Company Overview

Monolithic Power Systems (MPS), founded in 1997 and headquartered in San Jose, California, is a manufacturer o...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree