Conveyor type needle detection machine-ATTER-M1515

Conveyor type needle detection machine
Japan Metal Detector Manufacturing Co., Ltd.

Japan Metal Detector Manufacturing Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

73.0hours

About This Product

This is a needle detection machine made for the purpose of detecting the needles of sewn products with clothing accessories attached. Ideal for inspecting wide and thick products such as futons and wedding dresses. Sensitivity is switchable in 3 levels. Equipped with a non-defective counter as standard.

Features
■Three types of passing height, belt width 1,500mm.- 100mm and 120mm have been added to the conventional passing height of 150mm. You can choose according to the thickness of the product.
-The belt width is 1,500mm, making it suitable for reading the needles of wide products such as futons and mattresses.

■Can detect iron balls with a minimum diameter of 0.8Φ.The maximum detection sensitivity is 0.8 iron balls can be detected at any position within the gate.

■Detection sensitivity is switchable in 3 levels.The size of the broken needle that can be detected is converted into an iron ball, and three levels can be selected using the "SENSITIVITY" (sensitivity selector switch). When the passing height is 100mm, it is designed to be 3⁼0.8Φ, 2⁼1.0Φ, and 1⁼1.2Φ. If set to "2", anything larger than 1.0Φ will be detected, but 0.8Φ will not be detected. The 1 to 3 switch system allows for stable, high-quality meter reading without fine adjustments or individual differences.

■A non-defective counter is standard equipment.- Equipped as standard with a non-defective counter that automatically counts inspected products.
- You can return the counter value to "0" with the reset button.
・When reading multiple products in succession, please leave a distance of at least 600mm between the products.

■Buttons are provided in multiple locations so that they can be used effectively depending on the layout.・START (start button) and STOP (stop button) are installed in two locations.
・Emergency stop buttons are located in 3 locations. Press the button to stop, and turn the button to the right to cancel.

■SpecificationsThe motor for belt starting uses a three-phase 200V400W. It has a built-in slow start and slow stop circuit, so there is almost no recoil in the drive system when you perform a start operation. An inverter is used in the motor circuit so that the output rotation speed is the same whether the power source is 50Hz or 60Hz, so there is no need to specify it when ordering. Additionally, there is no need to adjust the motor rotation speed when relocating to an area with a different frequency.

Model
There is 1 model available for this product.

Product
Conveyor type needle detection machine

Handling Company
Japan Metal Detector Manufacturing Co., Ltd.

Categories

Testing Equipment

Needle Detectors

Sensors

Metal Detectors

Testing Equipment

Metal Detectors

20+ people viewing

Last viewed: 5 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Conveyor type needle detection machine

Image	Part Number	Price (excluding tax)	Belt width	Belt speed	Size	Detection sensitivity setting	Detection ability	Power consumption	Good product counter	Alarm	Passing height	Weight	Power supply voltage
	ATTER-M1515	Available upon quote	1,500mm	28m/min (50Hz/60Hz common)	100mm: 2,540 (L) × 2,070 (D) × 935 (H) mm 120mm: 2,540 (L) × 2,070 (D) × 955 (H) mm 150mm: 2,540 (L) × 2,070 (D) × 985 (H) mm	3-stage switching type 100mm: 3⁼0.8Φ, 2⁼1.0Φ, 1⁼1.2Φ) 120mm: 3⁼1.0Φ, 2⁼1.2Φ, 1⁼1.5Φ) 150mm: 3⁼1.2Φ, 2⁼1.5Φ, 1⁼1.8Φ)	Passing height 100mm: minimum 0.8Φ iron ball Passing height 120mm: Minimum 1.0Φ iron ball Passage height 150mm: minimum 1.2Φ iron ball	Approximately 800VA	Standard equipment	Buzzer/belt stop	100mm 120mm 150mm	Passing height 100mm: Approx. 480kg Passage height 120mm: Approx. 490kg Passage height 150mm: Approx. 500kg	Three phase 200V 50/60Hz

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Handy type needle detector Taldy

M&E Technology Co., Ltd.

160+ people viewing

Last viewed: 16 hours ago

Response time: 48.34 hours

Needle Detectors

3 models listed

PROBE Iron piece detection system for high-speed lines

M&E Technology Co., Ltd.

140+ people viewing

Last viewed: 22 hours ago

Response time: 48.34 hours

Needle Detectors

3 models listed

X-ray inspection device for shoes and apparel ITX-S40T series

Image Tech Co., Ltd.

120+ people viewing

Needle Detectors

3 models listed

X-ray inspection device for shoes and apparel ITX-S50T series

Image Tech Co., Ltd.

100+ people viewing

Last viewed: 4 hours ago

Needle Detectors

3 models listed

X-ray inspection device for shoes and apparel ITX-S65T series

Image Tech Co., Ltd.

110+ people viewing

Needle Detectors

3 models listed

X-ray inspection device for shoes and apparel ITX-S75T series

Image Tech Co., Ltd.

120+ people viewing

Needle Detectors

3 models listed

Portable X-ray digital panel X-Stage XS-3 series

Image Tech Co., Ltd.

80+ people viewing

Needle Detectors

2 models listed

Outpatient noise measures enhanced model conveyor type meter meter meteorological machine Iron pieces APA-6900 series

SANKO ELECTRONIC LABORATORY CO.,LTD

360+ people viewing

Last viewed: 16 hours ago

Response time: 12.53 hours

Needle Detectors

2 models listed

Needle detector/metal detector Product direction change device HR-5050N

Saprina Co., Ltd.

150+ people viewing

Last viewed: 7 hours ago

Response time: 7.89 hours

Needle Detectors

Conveyor type for futon meter type meter meter, iron pieces Large product inspection APA-1500F

SANKO ELECTRONIC LABORATORY CO.,LTD

290+ people viewing

Last viewed: 3 hours ago

Response time: 12.53 hours

Needle Detectors

Conveyor Type Type Metropolitan Iron / Non -Teta Shared SC1 Series

SANKO ELECTRONIC LABORATORY CO.,LTD

730+ people viewing

Last viewed: 9 hours ago

Response time: 12.53 hours

Needle Detectors

6 models listed

Equipped with SAS circuit, table type meter engineer APA-3000 for residue inspection of apparel products

SANKO ELECTRONIC LABORATORY CO.,LTD

290+ people viewing

Last viewed: 14 hours ago

Response time: 12.53 hours

Needle Detectors

See More Needle Detectors Products

Other products of Japan Metal Detector Manufacturing Co., Ltd.

Reviews shown here are reviews of companies.

Conveyor type needle detector ATTER-900LC2

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 13 minutes ago

Response time: 72.95 hours

Needle Detectors

3 models listed

Conveyor type needle detector ATTER-900LC1

Japan Metal Detector Manufacturing Co., Ltd.

10+ people viewing

Last viewed: 14 minutes ago

Response time: 72.95 hours

Needle Detectors

3 models listed

Handy type needle detector for iron only

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 5 hours ago

Response time: 72.95 hours

Needle Detectors

3 models listed

Conveyor type needle detector ATTER-M08Ⅱ

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 15 minutes ago

Response time: 72.95 hours

Needle Detectors

3 models listed

Buried metal detector Radio metal detector RD312

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 27 seconds ago

Response time: 72.95 hours

Metal Detectors

2 models listed

Small detector ORB-P5

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 5 hours ago

Response time: 72.95 hours

Needle Detectors

3 models listed

Conveyor type needle detector ATTER-M08W

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 19 minutes ago

Response time: 72.95 hours

Needle Detectors

3 models listed

Test piece

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 5 hours ago

Response time: 72.95 hours

Hand-type metal detector for all metals MH6

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 10 minutes ago

Response time: 72.95 hours

Metal Detectors

2 models listed

Conveyor type needle detector ATTER-M08WS

Japan Metal Detector Manufacturing Co., Ltd.

20+ people viewing

Last viewed: 21 minutes ago

Response time: 72.95 hours

Needle Detectors

3 models listed

View more products of Japan Metal Detector Manufacturing Co., Ltd.

About Company Handling This Product

Japan Metal Detector Manufacturing Co., Ltd.

Response Rate

100.0%

Response Time

73.0hrs

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Conveyor type needle detection machine Japan Metal Detector Manufacturing Co., Ltd.

Japan Metal Detector Manufacturing Co., Ltd.'s Response Status

About This Product

■Three types of passing height, belt width 1,500mm.

■Can detect iron balls with a minimum diameter of 0.8Φ.

■Detection sensitivity is switchable in 3 levels.

■A non-defective counter is standard equipment.

■Buttons are provided in multiple locations so that they can be used effectively depending on the layout.

■Specifications

1 Models of Conveyor type needle detection machine

ATTER-M1515

Customers who viewed this product also viewed

Other products of Japan Metal Detector Manufacturing Co., Ltd.

About Company Handling This Product

Related search keywords

Conveyor type needle detection machine
Japan Metal Detector Manufacturing Co., Ltd.