Aqua Qualis series waterproof pH meter PH-1000PE
Custom Co., Ltd.
About This Product
■ By changing 14 types of sensors for various uses, one unit can handle various measurement targets.
・ PH value and temperature are displayed simultaneously by large liquid crystal.
・ IP67 dustproof, waterproof resistance.
・ The “auto lock function” that holds the measured value after the measured value is stable.
・ Backlight function.
・ Three -point calibration is possible with PH standard solution. You can also select NIST calibration (4.01, 6.86, 9.18) and USA calibration (4.01, 7.00, 10.01).
・ Because it comes with a standard sensor (PHS-01PE), you can start using it immediately.
-
Product
Aqua Qualis series waterproof pH meter PH-1000PE
-
Handling Company
Custom Co., Ltd.
-
Categories
1 Models of Aqua Qualis series waterproof pH meter PH-1000PE
| Product Image | Part Number | Price (excluding tax) | Attached sensor (PHS-01PE) specification measurement target temperature range | Attached sensor (PHS-01PE) specification reference measurement target | Attached sensor (PHS-01PE) specification shaft part material | Battery life | Commodity composition | PH ATC (automatic temperature correction function) | PH measurement accuracy | PH range | PH resolution ability | Proofreading | Save and humidity | Temperature decomposition ability | Temperature measurement accuracy | Temperature measurement range | Used temperature and humidity | accessories | power supply | sampling | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PH-1000PE |
$ 132.60〜 | 0 ~+60 ℃ | The surface of the solid sample, general water sample (excluding pure water and ion exchange water) | ABS | About 120 hours (when using alkaline batteries) | Waterproof pH monitor (PH-1001PE) + Standard sensor (PHS-01PE) | can be | ± 0.1ph | 0.00 ~ 14.00ph | 0.01ph | Unavoidable | 0 ~+60 ° C, 80%RH or less (however, there is no condensation) | 0.1 ℃ | ± 1 ℃ | 0 ~+60 ℃ | 0 ~+50 ° C, 75%RH or less (however, there is no condensation) | Instruction manual (with warranty card), PH4.01 calibration standard solution (PHW-401), PH6.86 calibration standard solution (PHW-686) | AA batteries x 1 | About 3 times/seconds |
Body: Approximately W40 x H185 x D48mm Sensor: Approximately W35 x H65 x D35mm |
Body: Approximately 95g (including batteries) Sensor: Approximately 35g |
Customers who viewed this product also viewed
Other products of Custom Co., Ltd.
View more products of Custom Co., Ltd.
About Company Handling This Product
- Japan