All Categories

History

Data logger MIJ-01-MIJ-01
Data logger MIJ-01-Japan Environmental Measurement Co., Ltd.

About This Product

■Summary

This data logger supports DIFF 8ch, zero cross, pulse, and serial input, developed with high precision, high resolution, multichannel, large data retention, small size, light weight, power saving, and ease of use. Long-term measurement and recording is possible using only dry batteries. By using an optional multiplexer, it can be expanded to a maximum of 64ch DIFF and 128ch SE. You can build a wide range of systems from small-scale standalone to large-scale measurement systems. Various types of data loggers are already available on the market, such as expensive multi-function data loggers and inexpensive single-function data loggers, but it is difficult to find the optimal balance due to over-specification, insufficient functionality, and cost per channel. The data logger was developed with a focus on ``practical use,'' allowing it to be used for most purposes without adding a variety of separately sold options.

■Features

- Runs for 350 days with 4 AA alkaline batteries ・Equipped with 8 channels of preheat output with a capacity of 150mA ・Equipped with DIFF8ch (SE16ch) analog input - Equipped with a TCXO with an error of 5ppm. Further proofreading before shipping ・Equipped with 24bit (effective value 18bit) AD that enables measurement in μV units ・Equipped with zero cross/2ch, contact pulse/4ch, RS232C/2ch input/output ・Equipped with a memory card slot, so it is not limited by capacity in many applications. ・Software E-LOG that facilitates measurement sequences, calculation settings for physical quantities, etc. - Comes with a detachable external power connector. Easy external power supply using general-purpose DC12V system ・Connection to PC is limited to the included USB cable. Separately sold items such as serial conversion cables are not required. - Compatible with small waterproof boxes such as Pelican 1120, regardless of the installation location.

  • Product

    Data logger MIJ-01

Share this product


40+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Data logger MIJ-01

Image Part Number Price (excluding tax) A/D resolution Number of DC inputs EP ROM capacity Card format Cable size Size Number of serial inputs Current consumption during sleep Number of zero cross inputs Backup function Backup battery Panel mounting hole position Preheat output number Program memory Input impedance Input range/resolution/accuracy Built-in clock accuracy Operating environment External power supply voltage range Contact pulse input Onboard battery Temperature measurement Measurement interval Current consumption during measurement Estimated operating time Material Weight
Data logger MIJ-01-Part Number-MIJ-01

MIJ-01

Available upon quote

24bit (digits below the noise level are rounded to 18bit effective value)

DIFF/8ch (SE/16ch. Combination setting possible)

32kB (onboard)

FAT32

AWG24~16 (φ0.52~1.29mm),
Screwless (continuous pressure contact spring type)

176×116×28mm (maximum protrusion including external power connector)

2ch
(RS232C, Tx, Rx, DG, CTS, RTS)

Less than 10μA

2ch
(Less than 15V for non-contact AC or generator type anemometers such as anemometers)

When external power is connected, when the external power is cut off,
The built-in AA battery operates as a backup power source

CR2032 (mainly for TCXO operation during sleep)

Width 169mm, upper left hole offset +30mm from lower right hole (M4 recommended)

8ch
(Each channel can be set independently from DC12, 5, 2.5V. Maximum current value 150mA/ch)

128KB (Built-in microcontroller)

2MΩ or more

DIFF±5,000mV 0.01mV ±0.02%F.S.
DIFF±1,250mV 0.01mV ±0.05%F.S.
DIFF±15mV
0.1μV
±0.04%F.S.

±5ppm guaranteed value due to TCXO crystal oscillator
(±158 seconds/year at-40 to 85℃ ±120 seconds/year at-10 to 60℃)

-25 to 60℃/less than 90%RH. No condensation. There is no waterproof ability.
When installing outdoors, please use a waterproof case, desiccant, cable gland, etc.

9~18DCV

4ch (contact pulse less than 20Hz such as rain gauge)

4 AA type (freely select from 1.2~1.8DCV/cell)

Onboard IC thermistor + aluminum block as cold junction,
Compatible with T type and K type thermocouples. Cold junction temperature accuracy ±1.0℃

1,2,5,10, 30sec, 1,3,5,10,15,30min, 1,3,6hour

80mA or less (less than 100mA when writing to memory card)

350 days (analog 8ch instantaneous value, 10 minute interval, alkaline 2A, room temperature),
1.5V lithium 2.9A/500 days, eneloop pro 2.5A/430 days

RoHS compatible

358g, 455g (with 4AA alkaline)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Data Loggers Products

Other products of Japan Environmental Measurement Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Japan Environmental Measurement Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree