All Categories

History

Tightening/drilling/chilling 18V impact driver (main body only/battery, charger, case sold separately) TD173DZ-TD173DZ
Tightening/drilling/chilling 18V impact driver (main body only/battery, charger, case sold separately) TD173DZ-Ueda Co., Ltd.

Tightening/drilling/chilling 18V impact driver (main body only/battery, charger, case sold separately) TD173DZ
Ueda Co., Ltd.

Ueda Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

17.2hours

Relatively Fast Response


About This Product

■Optimal balance & slim head all around & comfortable operability

・Maximum tightening torque: 180N/m ・Total length: 111mm ・New trigger switch enables intuitive trigger shift operation from low speed to high speed range

■ “Omnidirectional” optimal balance and placement

・Weight: 1.5kg (including battery) ・Offset the battery to the rear to optimize the center of gravity and allow balanced tightening in all directions. Furthermore, interference with obstacles is also reduced. ・Grip part close to the shaft The hand you grip is close to the head, making it easy to press the shaft. Reduces come-outs. ・Easy-to-see and easy-to-use operation panel with rear-positioned operation You can operate the mode and check the remaining battery capacity while holding it.

■Japan's first "all-around" ring emitting LED light

- Zero bit shadow ・Can be used as a work light ・Light mode: Lights up for about 1 hour ・Brightness: Approximately 2.5 times (compared to Makita conventional model) ・Illuminance: 3 levels (strong/medium/weak)

■Double ball bearing used for bit runout that is the industry's smallest

・Newly shaped bit sleeve with ribs on the edge to prevent damage even if the sleeve hits a component ・Reduced bit insertion load ・Reduction of unexpected bit omissions ・High rigidity anvil

■Assist work in various scenes

・Easy 4 modes + 4 impact modes [fastest, strong, medium, weak] Tightening with priority given to power and speed, also delicate tightening of machine screws etc. ・Hand button switching You can switch the batting mode even while holding the grip. ・Mode memory function: One frequently used mode can be registered. Quickly switch between the "most recently used mode" and "registered mode" with the button on your hand ・Wood mode Starts tightening slowly with the trigger fully open, then automatically changes speed and tightens all at once at the fastest speed. ・Bolt mode: Forward rotation: Instantly fastest when the trigger is ON, Reverse rotation: Automatic stop when the nut loosens ・"Thin plate" mode for texturing After the screw penetrates, it detects the impact and automatically stops. ・"Thick plate" mode for textures Reduces screw head skipping and cam-out

■New plastic case

・A total of 4 batteries can be stored! ・Easy-to-open handle ・Easy-to-pull handle - Raise the handle and easily lock the lid. ・“Large capacity” with accessory case storage

  • Product

    Tightening/drilling/chilling 18V impact driver (main body only/battery, charger, case sold separately) TD173DZ

Share this product


30+ people viewing

Last viewed: 12 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Tightening/drilling/chilling 18V impact driver (main body only/battery, charger, case sold separately) TD173DZ

Image Part Number Price (excluding tax) Work amount per charge (estimate)/screw tightening Manufacturer Product number Blow mode Maximum tightening torque (N・m) Machine dimensions (mm) (length x width x height) Standard accessories Tightening capacity (mm) Color Mass (kg)
Tightening/drilling/chilling 18V impact driver (main body only/battery, charger, case sold separately) TD173DZ-Part Number-TD173DZ

TD173DZ

$ 119.69〜

Approximately 550 wood screws Φ5.4×90mm lauan
Wood screws Φ4.3×65mm lauan approximately 960 pieces
Approximately 5,280 machine screws M8 x 16mm

Makita

86284_1

Fastest/Strong/Medium/Weak
Wood/Bolt (normal rotation) /For textures (thin plate) /For textures (thick plate)

180

111×81×234

Plus bit 2-65
hook

Machine screw: M4~M8
Normal bolt: M5~M16
High strength bolt: M5~M14
Course thread: 22~125

Blue

1.5 (when BL1860B is installed)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Electric Screwdrivers Products

Other products of Ueda Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Ueda Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

17.2hrs


Company Review

5.0

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree