This product is registered by Venture Material Co., Ltd..
About This Product
■Summary
Even beginners can easily pave. If you mix a full commercially available 10 liter bucket of wood chips with 840mg (4.5 180cc cups) of resin until the surface of the chips shines and spread it evenly, you can install 1m² with a thickness of 1cm. If one can contains 9 liters and is 1 cm thick, it will harden in about 12 square meters in about half a day. Be sure to use dry wood chips and do it on a sunny day. When cleaning tools, wipe them with thinner.
■Main uses
・Permeable pavement, slope protection
・Effective use of reinforced buildings and industrial waste
・Slab blocks, flower pots, interior parts, etc.
■ Water permeability with less clogging
Structures containing permeable pavement blocks have ultra-fine pores. It allows only air and water to pass through its pores, and has an excellent hydraulic conductivity that is several dozen times higher than that of conventional concrete. It promotes the "water circulation" that is essential to maintaining the urban environment, and has the effect of mitigating the heat island phenomenon, which is said to be a cause of "global warming."
■Mixing waste materials
Almost all industrial waste such as plastic, rubber, glass, and shells can be molded and solidified and reused as aggregate.
■Advantages in terms of construction
It cures quickly and takes only a short time to cure, and can be opened in about 4 hours in the summer. No heating or special equipment is required, and it can be kneaded by hand using a plasterer's mixer or shovel.
■Cost savings
It helps reduce costs by shortening construction time and using conventional equipment.
■Containment of harmful substances
It has excellent drug resistance and can strongly contain many harmful substances such as PCBs, mercury, cadmium, hexavalent chromium, arsenic, and organic phosphorus.
■Recycling
Once cured with resin and crushed, it can be reused as blocks for paving and landfill.
■Color/shape
Since it is almost colorless and transparent, you can use the natural color of the aggregate as it is, or design a variety of patterns by coloring it. No special molds are required and it can be molded into any shape.
■Manufacture of secondary products
It can be used to create three-dimensional art designs such as flat blocks, flower pots, interior materials, etc., and has a variety of uses.
-
-
Product
Exterior/Landscaping High Advisor
Share this product
