All Categories

History

  1. Metoree
  2. Fixtures
  3. ID Clamps
  4. Inner diameter clamp for lathe processing (Heinbuch Japan Co., Ltd.)
Inner diameter clamp for lathe processing-Inner diameter clamp for lathe processing
Inner diameter clamp for lathe processing-Heinbuch Japan Co., Ltd.

Inner diameter clamp for lathe processing
Heinbuch Japan Co., Ltd.

About This Product

■Advantages of introducing the Heinbuch system

The Heinbuch system uses collet chucks and other clamping equipment in the Heinbuch system. A special adapter for internal machining mandrels and three-jaw chucks is attached to support a wide variety of clamping positions. No matter what kind of machining you do, you can get the same high clamping rigidity as before, and stable machining is possible. By implementing the innovative Heinbuch system, you can make the most of your machine's capabilities. In addition, it is expected to significantly reduce machine downtime during setup changes and improve production efficiency. for lathe

■Summary

Heinbuch's collet chuck has been updated based on the principle invented over 40 years ago. Unlike a standard 3-jaw chuck, it can clamp the workpiece against the surface, providing high clamping force. In addition, moment of inertia loss is suppressed, increasing machining stability.

■Features

Inner diameter adapter can be installed in less than 1 minute Toplas + Mando inner diameter adapter ・Vibration damping effect by rubber molding ・Extremely high clamping force even in severe clamping positions ・Wide clamping range ・High precision ・High gripping force and stability ・Quick change ・Extensibility Supports various clamping postures with various adapters

■Advantages

・Long lifespan ・Improve production efficiency ・Reducing defective rate ・Extend machine operating time by shortening setup time

  • Product

    Inner diameter clamp for lathe processing

Share this product


300+ people viewing

Last viewed: 1 hour ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Inner diameter clamp for lathe processing

Image Part Number Price (excluding tax)
Inner diameter clamp for lathe processing-Part Number-Inner diameter clamp for lathe processing

Inner diameter clamp for lathe processing

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

4 Nail Single Chuck Flange Standard Type 46 Series-Kawatatek Co., Ltd.

4 Nail Single Chuck Flange Standard Type 46 Series

Kawatatek Co., Ltd.

5.0

390+ people viewing

Response time: 13.39 hours

ID Clamps

36 models listed

4 Nail single chuck short tapered type 46 series-Kawatatek Co., Ltd.

4 Nail single chuck short tapered type 46 series

Kawatatek Co., Ltd.

5.0

250+ people viewing

Last viewed: 3 hours ago

Response time: 13.39 hours

ID Clamps

30 models listed

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC

Matsumoto Machine Industry Co., Ltd.

510+ people viewing

Last viewed: 15 hours ago

Response time: 27.83 hours

ID Clamps

3 models listed

Air chuck stationary type NPC-4FS-31-Naka Seiki Co., Ltd.

Air chuck stationary type NPC-4FS-31

Naka Seiki Co., Ltd.

5.0

450+ people viewing

Response time: 24.85 hours

ID Clamps

2 models listed

Strong grasp power and appropriate for heavy sharpening independent chuck steel type 41/42 series-Kawatatek Co., Ltd.

Strong grasp power and appropriate for heavy sharpening independent chuck steel type 41/42 series

Kawatatek Co., Ltd.

5.0

290+ people viewing

Response time: 13.39 hours

ID Clamps

20 models listed

Gripping Technique Chuck General Purpose Solid 3 Jaw Power Chuck Z-0-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck General Purpose Solid 3 Jaw Power Chuck Z-0

Matsumoto Machine Industry Co., Ltd.

350+ people viewing

Last viewed: 15 hours ago

Response time: 27.83 hours

ID Clamps

2 models listed

Used for large lathes, 5 -sided processing machines, etc. Thin indpendent chuck TI series-Kawatatek Co., Ltd.

Used for large lathes, 5 -sided processing machines, etc. Thin indpendent chuck TI series

Kawatatek Co., Ltd.

5.0

260+ people viewing

Response time: 13.39 hours

ID Clamps

12 models listed

Occasional claws type/2 -piece type specification Tumechack FBK/FBJ series-Kawatatek Co., Ltd.

Occasional claws type/2 -piece type specification Tumechack FBK/FBJ series

Kawatatek Co., Ltd.

5.0

250+ people viewing

Last viewed: 38 minutes ago

Response time: 13.39 hours

ID Clamps

18 models listed

Grasping Technique Chuck Double Slide Hollow 3 Jaw Power Chuck He-Matsumoto Machine Industry Co., Ltd.

Grasping Technique Chuck Double Slide Hollow 3 Jaw Power Chuck He

Matsumoto Machine Industry Co., Ltd.

350+ people viewing

Response time: 27.83 hours

ID Clamps

2 models listed

Grasping Technique Chuck Double Slide Hollow 2 Jaw Power Chuck HeJ-Matsumoto Machine Industry Co., Ltd.

Grasping Technique Chuck Double Slide Hollow 2 Jaw Power Chuck HeJ

Matsumoto Machine Industry Co., Ltd.

290+ people viewing

Response time: 27.83 hours

ID Clamps

2 models listed

3 Tumes Cloll Chuck Bachelor / Hard Fang Standard Type NST Series-Kawatatek Co., Ltd.

3 Tumes Cloll Chuck Bachelor / Hard Fang Standard Type NST Series

Kawatatek Co., Ltd.

5.0

720+ people viewing

Last viewed: 21 hours ago

Response time: 13.39 hours

ID Clamps

40 models listed

Gripping technique Chuck Double slide slant retraction hollow (slant retraction) 3-jaw power chuck HeX-Matsumoto Machine Industry Co., Ltd.

Gripping technique Chuck Double slide slant retraction hollow (slant retraction) 3-jaw power chuck HeX

Matsumoto Machine Industry Co., Ltd.

320+ people viewing

Response time: 27.83 hours

ID Clamps

2 models listed

See More ID Clamps Products

Other products of Heinbuch Japan Co., Ltd.

Reviews shown here are reviews of companies.

Collet chuck span top mini-Heinbuch Japan Co., Ltd.

Collet chuck span top mini

Heinbuch Japan Co., Ltd.

250+ people viewing

Response time: 186.52 hours

Collet Chucks

3 models listed

Collet Chuck Span Top Nova-Heinbuch Japan Co., Ltd.

Collet Chuck Span Top Nova

Heinbuch Japan Co., Ltd.

250+ people viewing

Response time: 186.52 hours

Collet Chucks

3 models listed

External clamp for lathe processing-Heinbuch Japan Co., Ltd.

External clamp for lathe processing

Heinbuch Japan Co., Ltd.

190+ people viewing

Response time: 186.52 hours

Clamps
Collet chuck Torok manual tightening type-Heinbuch Japan Co., Ltd.

Collet chuck Torok manual tightening type

Heinbuch Japan Co., Ltd.

240+ people viewing

Last viewed: 5 hours ago

Response time: 186.52 hours

Collet Chucks

3 models listed

Jaw module three-jaw adapter for lathe processing-Heinbuch Japan Co., Ltd.

Jaw module three-jaw adapter for lathe processing

Heinbuch Japan Co., Ltd.

260+ people viewing

Response time: 186.52 hours

Toolholders

2 models listed

Collet chuck B-Top three-jaw chuck-Heinbuch Japan Co., Ltd.

Collet chuck B-Top three-jaw chuck

Heinbuch Japan Co., Ltd.

270+ people viewing

Last viewed: 18 hours ago

Response time: 186.52 hours

Collet Chucks

3 models listed

Standard lineup includes raw and hardened nails for lathe processing Top lass + face driver adapter-Heinbuch Japan Co., Ltd.

Standard lineup includes raw and hardened nails for lathe processing Top lass + face driver adapter

Heinbuch Japan Co., Ltd.

160+ people viewing

Response time: 186.52 hours

Collet chuck B-Top3 Three-jaw chuck-Heinbuch Japan Co., Ltd.

Collet chuck B-Top3 Three-jaw chuck

Heinbuch Japan Co., Ltd.

230+ people viewing

Last viewed: 7 hours ago

Response time: 186.52 hours

Collet Chucks

3 models listed

Standard end stop for lathe processing-Heinbuch Japan Co., Ltd.

Standard end stop for lathe processing

Heinbuch Japan Co., Ltd.

170+ people viewing

Response time: 186.52 hours

Inner diameter mandrel mandrel-Heinbuch Japan Co., Ltd.

Inner diameter mandrel mandrel

Heinbuch Japan Co., Ltd.

370+ people viewing

Last viewed: 13 hours ago

Response time: 186.52 hours

ID Clamps

2 models listed

Quick change for lathe processing-Heinbuch Japan Co., Ltd.

Quick change for lathe processing

Heinbuch Japan Co., Ltd.

170+ people viewing

Response time: 186.52 hours

Mandrel for gear cutting Mando G-Heinbuch Japan Co., Ltd.

Mandrel for gear cutting Mando G

Heinbuch Japan Co., Ltd.

260+ people viewing

Last viewed: 58 minutes ago

Response time: 186.52 hours

ID Clamps

3 models listed


View more products of Heinbuch Japan Co., Ltd.

About Company Handling This Product

Heinbuch Japan Co., Ltd.

Related search keywords

ID Clamps
ID Clamps　Heinbuch Japan Co., Ltd.
Heinbuch Japan Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree