[Tunnel face forward probe] TSP303 Ease-TSP303 Ease

[Tunnel face forward probe] TSP303 Ease
FTS Co., Ltd.

About This Product

TSP303 Ease explores geologically discontinuous zones (fracture zones, aquifers, etc.) in front of the tunnel face in a short time. Measurements are made by blasting a small amount of gunpowder in an oscillation hole installed in the wall of a tunnel to generate elastic waves. The reflected waves reflected from the geological discontinuity zone in front of the face (exploration range: 100m to 150m) are received and recorded by four highly sensitive three-component receivers installed with quick-hardening mortar inside the hole wall of the mine.

The acquired reflection waveform is analyzed using TSP303 dedicated software, and the position of the geological discontinuity zone can be analyzed in 3D display. From the analysis results, an elastic wave velocity distribution map in front of the face can be obtained, as well as the geological situation of the surrounding ground. The entire process, from measurement to output of analysis results, can be completed in half a day.

■Features- A small amount of gunpowder is blasted in an oscillation hole installed in the hole wall to generate elastic waves. The reflected waves reflected from the geological discontinuity zone are received and recorded by four highly sensitive three-component receivers.
・Create a 3D model in a range of 100 to 150 m forward from the face on both sides of the tunnel axis, 50 m to the left and right, and analyze the elastic wave velocity for each grid.
・The 3D elastic wave velocity map can be sliced ​​with vertical or transverse lines. This allows you to check the elastic wave velocity at detailed points.
・The 3D final result can be output by projecting the reflective surface onto the elastic wave velocity.

The 3D elastic wave velocity map can be sliced ​​with vertical and transverse lines, and the final 3D result is an output that projects the reflection surface onto the elastic wave velocity. This allows you to check the elastic wave velocity at detailed points. The 2D final result outputs the physical property values ​​calculated from the Vp and Vs velocities and the 2D reflective surface in a plan view and longitudinal section. The final result can be output as DXF, so the data can be used in CIM, etc.

Purpose
■Simple preparation work・A vibration receiving hole and an oscillation hole are provided on the side wall.
・3-axis sensor with dowel (casing) installed in the receiving hole
・System setup and installation time total approximately 30 minutes

■Powerful 3D analysis software・Wizard-following 3D seismic waveform data processing (data processing is fully automatic or semi-automatic)
・Comprehensive list of rock types and rock classes
・3D analysis model can be set for a maximum area of ​​250m x 100m x 100m

Model
There is 1 model available for this product.

Product
[Tunnel face forward probe] TSP303 Ease

Handling Company
FTS Co., Ltd.

40+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of [Tunnel face forward probe] TSP303 Ease

Image	Part Number	Price (excluding tax)
	TSP303 Ease	Available upon quote

Other products of FTS Co., Ltd.

Reviews shown here are reviews of companies.

[Portable Rockwell Hardness Meter] Computest lite

FTS Co., Ltd.

80+ people viewing

Response time: 192.03 hours

Shore Hardness Testers

2 models listed

[Portable hardness tester] Echochip 550

FTS Co., Ltd.

80+ people viewing

Response time: 192.03 hours

Hardness Testing Instruments

[Hardness Tester] Echo Chip Piccolo 2

FTS Co., Ltd.

80+ people viewing

Last viewed: 13 hours ago

Response time: 192.03 hours

Hardness Testing Instruments

[Portable hardness tester] Echochip UCI

FTS Co., Ltd.

60+ people viewing

Response time: 192.03 hours

Hardness Testing Instruments

[Wireless Hardness Tester] Equotip Live Leeb D

FTS Co., Ltd.

70+ people viewing

Response time: 192.03 hours

Hardness Testing Instruments

[Wireless Hardness Tester] Equotip Live UCI

FTS Co., Ltd.

90+ people viewing

Last viewed: 8 hours ago

Response time: 192.03 hours

Hardness Testing Instruments

[Non-destructive/non-contact film thickness meter] Coat Master 3D

FTS Co., Ltd.

70+ people viewing

Response time: 192.03 hours

Film Thickness Meters

[Non-destructive/non-contact film thickness meter] Coatmaster FLEX

FTS Co., Ltd.

70+ people viewing

Response time: 192.03 hours

Film Thickness Meters

[Ultrasonic flaw detector] Smartor UT

FTS Co., Ltd.

70+ people viewing

Response time: 192.03 hours

Ultrasonic Flaw Detectors

[Ultrasonic thickness gauge] Smartor TG

FTS Co., Ltd.

60+ people viewing

Last viewed: 3 hours ago

Response time: 192.03 hours

Ultrasonic Thickness Gauges

[Ultrasonic thickness gauge] CTS-49

FTS Co., Ltd.

90+ people viewing

Last viewed: 8 hours ago

Response time: 192.03 hours

Ultrasonic Thickness Gauges

[Reinforcement bar probe] Profometer PM8000

FTS Co., Ltd.

110+ people viewing

Response time: 192.03 hours

Wall Scanners

2 models listed

View more products of FTS Co., Ltd.

About Company Handling This Product

FTS Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

[Tunnel face forward probe] TSP303 Ease FTS Co., Ltd.

About This Product

■Features

■Simple preparation work

■Powerful 3D analysis software

1 Models of [Tunnel face forward probe] TSP303 Ease

TSP303 Ease

Other products of FTS Co., Ltd.

About Company Handling This Product

[Tunnel face forward probe] TSP303 Ease
FTS Co., Ltd.