This product is registered by TUNGALOY CORPORATION.
About This Product
■Metal tongue flick
・It is a material with excellent heat resistance, strength, and abrasion resistance, and is resistant to deterioration or attack by oil, water, etc.
- Because it is a good conductor of heat, the heat generated on the friction surface is not only absorbed by the mating plate, but also because the tongue flick itself is a good conductor of heat, it is absorbed through the friction plate.
・Since it has a large heat capacity, it can maintain stable friction coefficient and wear resistance.
■Non-metal tongue flick
-Material made from resin and organic/inorganic fibers with excellent heat resistance, and is mainly used in wet conditions.
- It has elasticity and disperses frictional heat work, so it has high energy absorption and has a light specific gravity, so it can be made smaller and lighter.
■Precautions for use
When using multiple plates, both wet and dry, the clearance is generally 1/1000 of the outside diameter per surface, but we recommend a minimum of 0.2 mm and a maximum of 0.6 mm. In wet applications, multiple plates are generally used, but the absorption energy limit depends on the type of oil used, the amount of oil supplied, the method of oil supply, the oil temperature, the number of friction plates, the shape of the oil groove, relative speed, frequency, etc. Please note that this may be affected by
The normal usage range (other than absorbed energy) is as follows: In addition, the absorbed energy capacity must be taken into account.
Share this product
