This product is registered by SANEI Co,.Ltd.
About This Product
Bringing together the best of pneumatic machinery manufacturers. With a multi-line lineup, we have achieved versatility that overturns common sense regarding air motors. Our unique mechanism shines especially in low-speed rotation and start-up performance, which are areas where air motors are weak.
・Can be used even in bad environments
Since the power source is compressed air, it can be used in flammable and dangerous environments such as explosive gas and dust explosion atmospheres.
・Self-cooling effect
There is a self-cooling effect due to the adiabatic expansion of compressed air, and the motor itself does not easily generate heat. Standard operating atmosphere temperature is -10℃~70℃.
・Easy to control rotation speed
The rotation speed can be easily varied from low to high speed by adjusting the flow rate using a throttle valve (speed controller) and adjusting the pressure using a pressure reducing valve (regulator).
・Safe against overload
Even if the motor is overloaded, it will simply decelerate or stop in balance with the load, and the motor will not burn out or overheat, and when the load decreases, it will start up or speed up again and return to its original state.
・Wide range of uses
It has a wide range of uses, such as storing compressed air in a receiver tank etc. for emergency drive during power outages, or as a brake system that utilizes the air motor's engine braking characteristics rather than as a prime mover.
・Can be used frequently
The compressibility of air pressure (cushion vacuum effect) allows for smooth starting, stopping, and forward/reverse rotation.
・Small and lightweight
Since the machine weight and volume per motor output are small, it is suitable for reducing the size and weight of the entire device.
・Compressed gas can also be used
In addition to compressed air, compressed gases such as nitrogen gas can also be used.
◼︎Features
・This motor has a proven track record over many years, and comes in a variety of mounting options including base and flange, with brake, reducer, and control valve.
- Strong engine braking can be expected when used with meter-out (speed control using a throttle valve on the exhaust side).
・Each sliding part is lubricated using an oil bath method. Basically, a line oiler is not required, but a line oiler should be installed on the air supply side (primary piping side) when operating continuously, when used infrequently, when used vertically (output shaft facing downward), etc. is recommended.
・For models with a control valve, you can control the rotation speed and rotation direction by operating the control valve.
・Since the torque is large in the low speed range, it is used in applications that require large starting torque, such as winches and hoists.
-
-
Product
AIR MOTOR radial piston type DM series
Share this product
