All Categories

History

  1. Metoree
  2. Clamps & Fasteners
  3. Chucks
  4. Non-magnetic chuck Promelta® system A series (KANETEC CO.,LTD.)
Non-magnetic chuck Promelta® system A series-PRB-1218A
Non-magnetic chuck Promelta® system A series-KANETEC CO.,LTD.

Non-magnetic chuck Promelta® system A series
KANETEC CO.,LTD.

About This Product

■Suitable for non-ferrous metals, non-metallic and resin processing

Non-magnetic workpieces such as plastic, aluminum, stainless steel, and ceramic can be easily fixed. Especially suitable for fixing small workpieces.

■Achieve high-precision machining without distortion

The high-precision fixing agent fixes the workpiece in a natural state, allowing distortion-free cutting and high-precision grinding.

■Can be fixed at low temperatures close to room temperature

Reduced deterioration in machining accuracy due to the effects of heat.

■Only 30 seconds

Enables fast fixing and removal work comparable to that of a magnetic chuck.

■Machining accuracy has been greatly improved. High-precision processing on the micron scale is possible.

By developing a new fixative, we have made the adhesive film, which affects processing accuracy, thinner than before, achieving processing accuracy on the order of microns. Furthermore, by making it possible to fix at a low temperature close to room temperature and suppressing the temperature difference between fixation and release, the thermal effect on the workpiece has been significantly reduced.

■Further improve accuracy and stability

The material of the work surface has been changed from the conventional aluminum to S45C, improving accuracy stability and wear resistance. In addition, it is now possible to improve accuracy by re-grinding the work surface.

■Reduced operation time

By adopting a new cooling method, it is now possible to fix and remove as quickly as a magnetic chuck (about 30 seconds). Work efficiency has also been further improved in high-mix, small-lot processing operations where setup changes are frequent.

■Significantly smaller control device (H795mm x W450mm x D470mm)

Approximately 50% smaller (volume ratio) than conventional products. It can be used regardless of the installation location.

■Others

Compatible with wet processing

  • Product

    Non-magnetic chuck Promelta® system A series

Share this product


210+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Non-magnetic chuck Promelta® system A series

Image Part Number Price (excluding tax)
Non-magnetic chuck Promelta® system A series-Part Number-PRB-1218A

PRB-1218A

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Actuator small parallel chuck series multi -type-Nihon Pisco Co., Ltd.

Actuator small parallel chuck series multi -type

Nihon Pisco Co., Ltd.

5.0

320+ people viewing

Last viewed: 10 hours ago

Response time: 21.06 hours

Chucks

30 models listed

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck Automatic Setup Change Quick Jaw Change Chuck HQJC

Matsumoto Machine Industry Co., Ltd.

530+ people viewing

Response time: 27.83 hours

Chucks

3 models listed

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)-NK Works Co., Ltd.

External clamp chuck (for lathe) SPANNTOP nova pullback (collet retractable type)

NK Works Co., Ltd.

310+ people viewing

Response time: 29.53 hours

Chucks

18 models listed

Gripping technique chuck general purpose hollow 3 jaw power chuck Z-Matsumoto Machine Industry Co., Ltd.

Gripping technique chuck general purpose hollow 3 jaw power chuck Z

Matsumoto Machine Industry Co., Ltd.

420+ people viewing

Last viewed: 6 hours ago

Response time: 27.83 hours

Chucks
Robot hand KUMADE CUP-Harmotech Co., Ltd.

Robot hand KUMADE CUP

Harmotech Co., Ltd.

440+ people viewing

Last viewed: 19 hours ago

Chucks

3 models listed

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)-NK Works Co., Ltd.

External clamp chuck (for lathe) SPANNTOP nova dead length (collet stationary type)

NK Works Co., Ltd.

260+ people viewing

Last viewed: 5 hours ago

Response time: 29.53 hours

Chucks

6 models listed

Gripping Technique Chuck Hollow Big Bore 3 Jaw Power Chuck Z (Big Bore)-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck Hollow Big Bore 3 Jaw Power Chuck Z (Big Bore)

Matsumoto Machine Industry Co., Ltd.

380+ people viewing

Response time: 27.83 hours

Chucks
Robot hand development Wafer transfer EC type-Harmotech Co., Ltd.

Robot hand development Wafer transfer EC type

Harmotech Co., Ltd.

370+ people viewing

Chucks

2 models listed

External clamp chuck (for lathe) TOPlus pullback (collet retractable type)-NK Works Co., Ltd.

External clamp chuck (for lathe) TOPlus pullback (collet retractable type)

NK Works Co., Ltd.

200+ people viewing

Last viewed: 11 hours ago

Response time: 29.53 hours

Chucks

3 models listed

Gripping Technique Chuck General Purpose Solid 3 Jaw Power Chuck Z-0-Matsumoto Machine Industry Co., Ltd.

Gripping Technique Chuck General Purpose Solid 3 Jaw Power Chuck Z-0

Matsumoto Machine Industry Co., Ltd.

360+ people viewing

Last viewed: 13 hours ago

Response time: 27.83 hours

Chucks

2 models listed

Magnetic equipment Square permanent electromagnetic chuck for cutting ESZN/ESZD-Hishiko Co., Ltd.

Magnetic equipment Square permanent electromagnetic chuck for cutting ESZN/ESZD

Hishiko Co., Ltd.

420+ people viewing

Response time: 43.55 hours

Chucks

4 models listed

Robot hand development Wafer transfer SF type-Harmotech Co., Ltd.

Robot hand development Wafer transfer SF type

Harmotech Co., Ltd.

340+ people viewing

Chucks

2 models listed

See More Chucks Products

Other products of KANETEC CO.,LTD.

Reviews shown here are reviews of companies.

Permanent electromagnetic chuck Permanent electromagnetic chuck for cutting EP-QN type-KANETEC CO.,LTD.

Permanent electromagnetic chuck Permanent electromagnetic chuck for cutting EP-QN type

KANETEC CO.,LTD.

460+ people viewing

Response time: 43.25 hours

Magnetic Chucks

2 models listed

Permanent electromagnetic chuck Permanent electromagnetic chuck for cutting EP-QS type-KANETEC CO.,LTD.

Permanent electromagnetic chuck Permanent electromagnetic chuck for cutting EP-QS type

KANETEC CO.,LTD.

490+ people viewing

Response time: 43.25 hours

Magnetic Chucks

2 models listed

Square permanent electromagnetic chuck EP-QS3 type-KANETEC CO.,LTD.

Square permanent electromagnetic chuck EP-QS3 type

KANETEC CO.,LTD.

410+ people viewing

Response time: 43.25 hours

Magnetic Chucks

2 models listed

EP chuck master EPS-P type-KANETEC CO.,LTD.

EP chuck master EPS-P type

KANETEC CO.,LTD.

490+ people viewing

Response time: 43.25 hours

Control Panels

2 models listed

Permanent electromagnetic chuck for cutting with degaussing function EP-QD type-KANETEC CO.,LTD.

Permanent electromagnetic chuck for cutting with degaussing function EP-QD type

KANETEC CO.,LTD.

430+ people viewing

Response time: 43.25 hours

Magnetic Chucks

2 models listed

Permanent electromagnetic chuck for cutting with degaussing function EP-D type-KANETEC CO.,LTD.

Permanent electromagnetic chuck for cutting with degaussing function EP-D type

KANETEC CO.,LTD.

380+ people viewing

Last viewed: 6 hours ago

Response time: 43.25 hours

Magnetic Chucks

2 models listed

Powerful permanent electromagnetic chuck with vacuum function EP-DV type-KANETEC CO.,LTD.

Powerful permanent electromagnetic chuck with vacuum function EP-DV type

KANETEC CO.,LTD.

430+ people viewing

Response time: 43.25 hours

Vacuum Chucks

4 models listed

Powerful permanent electromagnetic chuck for heavy grinding EP-DWM type-KANETEC CO.,LTD.

Powerful permanent electromagnetic chuck for heavy grinding EP-DWM type

KANETEC CO.,LTD.

420+ people viewing

Response time: 43.25 hours

Magnetic Clamps

3 models listed

Chuck master for permanent electromagnetic chuck with degaussing function EPS-D type-KANETEC CO.,LTD.

Chuck master for permanent electromagnetic chuck with degaussing function EPS-D type

KANETEC CO.,LTD.

350+ people viewing

Response time: 43.25 hours

Control Panels

2 models listed

Round permanent electromagnetic chuck EPC-AST type-KANETEC CO.,LTD.

Round permanent electromagnetic chuck EPC-AST type

KANETEC CO.,LTD.

470+ people viewing

Response time: 43.25 hours

Magnetic Clamps

3 models listed

Electromagnetic/permanent electromagnetic chuck for strain relief machining Axim EPZF-WX type for high precision cutting-KANETEC CO.,LTD.

Electromagnetic/permanent electromagnetic chuck for strain relief machining Axim EPZF-WX type for high precision cutting

KANETEC CO.,LTD.

360+ people viewing

Response time: 43.25 hours

Magnetic Chucks

2 models listed

Star pole round permanent magnetic chuck RMC-X type-KANETEC CO.,LTD.

Star pole round permanent magnetic chuck RMC-X type

KANETEC CO.,LTD.

270+ people viewing

Last viewed: 22 hours ago

Response time: 43.25 hours

Magnetic Chucks

View more products of KANETEC CO.,LTD.

About Company Handling This Product

KANETEC CO.,LTD.

Company Overview

Kanetec CO. LTD., founded in 1949 and headquartered in Nagano, Japan, is a designer, manufacturer, and supplie...

See More

Related search keywords

Chucks
Chucks　KANETEC CO.,LTD.
KANETEC CO.,LTD.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree