Press machine forming machine TP series TP-45
Asahi Seiki Kogyo Co., Ltd.
About This Product
■Product overview
Standard model of transfer press with a rich track record
■Punch stripper & stop relief device
Used to remove the product from the punch.
■Cross motion device
Used for piercing, slotting, and forming from the side of the product (front, back, left, right).
■Oscillating feed device
It is used to feed materials in a zigzag pattern, and there are two-row and three-row pickers.
■NC oscillating feeder
Used for zigzag feed of material using 2-axis NC control. When you enter the blank diameter and material width using the keys, the roll feed amount and swing amount will be automatically calculated.
■Blank holder device
From the second process onwards, it is used as a wrinkle suppressor to reliably control the drawing process of the blank.
■Upper knockout device
It is used for tooling where the product is formed on the inside diameter side of the punch, and the product is knocked out from the inside of the punch.
■Thread rolling device
It is installed on the right side or in the middle of the transfer press and is used for thread forming, rolling cuts, and beading.
■Oil lubrication device
Used to supply processing oil to the die and material.
■Workpiece detection device
Reliably detects workpiece transfer to prevent tool damage.
■Standard accessories
・Inverter transmission
・Air clutch brake
・Transfer mechanism
・Upper plunger device
・Automatic lubrication device
・Operation panel & control panel
・Lighting equipment
・100V, 200V outlet
・Transfer slide cradle (45ton or more)
・Box foot type oil pan
・Safety cover (compatible with new structural standards)
・Sequencer control device (using resolver)
・This machine oil partial recovery device
・PL seal
・Safety block
・Anti-vibration mount
-
Product
Press machine forming machine TP series TP-45
-
Handling Company
Asahi Seiki Kogyo Co., Ltd.
-
Categories
1 Models of Press machine forming machine TP series TP-45
| Product Image | Part Number | Price (excluding tax) | Die set Maximum blank diameter for punching only mm | Die set Maximum blank diameter mm | Die set Maximum drawing depth (Maximum ram stroke) | Die set maximum drawing depth (standard ram stroke) | Die set maximum feed length mm | Die set maximum material width mm | Die set number of steps (standard) | Die set process interval in | Machine dimensions Height mm | Machine dimensions Width mm | Machine dimensions depth mm | Machine speed (no load) min^-1 | Main motor kw | Mass (including die set) ton | Maximum ram stroke mm | Rated capacity kN | Recommended capacity kN | Shut height mm | Standard ram stroke mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TP-45 |
Available upon quote | 69.9~38.1 | 69.9~50.8 | 41.3mm | 25.4mm | 82 | 114 | 8~14 | 4 1/2~2 1/2 | 2,590 | 2,280 | 1,410 | 40~150 | 5.5 (4P) | 5.5 | 101.6 | 450 | 300 | 330.2 | 63.5 |
Customers who viewed this product also viewed
Other products of Asahi Seiki Kogyo Co., Ltd.
View more products of Asahi Seiki Kogyo Co., Ltd.
