Press Machine Transfer Press STP Series STP-45
Asahi Seiki Kogyo Co., Ltd.
About This Product
■Product overview
A transfer press that uses a straight side frame and cast iron six-sided guide to improve bottom dead center accuracy. Adopts modified sine cam motion that stops at 60 degrees at bottom dead center.
■Transfer mechanism
The transfer slide is operated reliably by a cam mounted on the shaft on the left side of the press.
■Uses a bare trade side frame that achieves high rigidity
STP-45 is a straight-sided transfer press that pursues high rigidity and improved dynamic accuracy at the bottom dead center during high-load press processing.
■Adopts 6-sided slide guide for high precision
By adopting a highly rigid 6-sided guide in the sliding part, changes in accuracy are extremely small, further improving work accuracy during machining.
■Standard accessories
・Inverter transmission
・Air clutch brake
・Transfer mechanism
・Upper plunger device
・Automatic lubrication device
・Operation panel & control panel
・Box foot type oil pan
・Lighting equipment
・100V, 200V outlet
・This machine oil partial recovery device
・Transfer slide cradle
・Safety cover (compatible with new structural standards)
・Sequencer control device (using resolver)
・PL seal
・Safety block
・Anti-vibration mount
■Special accessories
・Punch stripper & strip relief device
・Anteroposterior cross motion device
Single cross motion device
・Oscillating feed device (mechanical)
・NC oscillating feeder
・Blank holder device
・Thread rolling device
・Oil lubrication device
・Workpiece detection device
・Vacuum device
・Soundproof cover
・Back roll feed device
・Finger stop device
・Automatic supply reel and take-up reel or scrap cutter
・Knockout pulling device
・Patrite
・Blank feed device
・Soap water lubrication device
・Yoromeki device
・Reversing device
・Punch/die cooling device
・Lower knockout mechanism
・Air valve device
・Special paint color (customer specified)
-
Product
Press Machine Transfer Press STP Series STP-45
-
Handling Company
Asahi Seiki Kogyo Co., Ltd.
-
Categories
1 Models of Press Machine Transfer Press STP Series STP-45
| Product Image | Part Number | Price (excluding tax) | Die set Maximum blank diameter Drawing aperture mm | Die set Maximum blank diameter Only for punching mm | Die set Maximum drawing depth mm | Die set maximum feed length mm | Die set maximum material width mm | Die set number of steps | Die set process interval mm | Machine dimensions Height mm | Machine dimensions Width mm | Machine dimensions depth mm | Machine speed (no load) min^-1 | Main motor kw | Maximum ram stroke mm | Mechanical mass ton | Rated capacity kN | Recommended capacity kN | Shut height mm | Standard ram stroke mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
STP-45 |
Available upon quote | 69.9~50.8 | 69.9~38.1 | 25.4 | 82 | 114 | 8~14 | 115~65 | 3,090 | 2,610 | 1,810 | 40~150 | 5.5 (4P) | 100 | 10 | 450 | 300 | 350 | 65 |
Customers who viewed this product also viewed
Other products of Asahi Seiki Kogyo Co., Ltd.
View more products of Asahi Seiki Kogyo Co., Ltd.
