Parker Ultra High Pressure Hose 2840D-03V34
Flow Joint Co., Ltd.
About This Product
Polyflex Ultra High Pressure Hose Handling Guide
■Danger
- Improper selection or incorrect selection of hoses, fittings, and related accessories, or improper use may result in death, injury, or loss of equipment. Please handle the product with due care of the following points. Of course, it is not limited to only these, so users should handle the product at their own responsibility to prevent danger.
・Please do not use for anything other than fresh water.
・Do not use fresh water at a temperature exceeding 0°C to +60°C.
・There is a risk that the fitting may come off at high speed. Please do not twist or pull.
・Do not touch the hose or fittings while they are in use (pressurized). Liquid will gush out at high speed.
・Do not step on or step over the hose or fittings. Liquid will gush out at high speed.
・Please keep away from flammable materials.
・Please be careful not to turn on electricity. Be careful of electric shock from high voltage lines and other power sources.
・There is a risk that the equipment may suddenly malfunction due to hydraulic pressure, causing contact and damage to the equipment.
・Do not come close to the hose while it is in use. The hose moves like a whip and is extremely dangerous.
・Please be careful not to come into direct contact with liquid.
・Please do not repair or modify.
・Do not use if the hose or fittings are damaged or scratched.
・If you see a slight leak, please stop using it immediately.
- Do not use damaged hoses and replace them immediately.
・Please use protective clothing and safety glasses.
・Do not use the product outside the maximum operating pressure and operating temperature range listed in the catalog.
・It is important to carefully read and follow the instructions below before selecting Parker hoses, caps, and accessories.
■2840D-03V34
・Color: Red (8 layers, 5mm)
・Structure: Inner tube/Polyoxymethalin, Reinforcement layer/8 spirals, Outer cover/Polyamide
・Application: For water jet
・Temperature: -10℃～70℃
・Inner diameter: 4.5mm
・Maximum outer diameter: 15.0mm
・Maximum working pressure: 400MPa
・Minimum burst pressure: 800MPa
・Minimum bending radius: 200mm
・Mass: 600g/m
-
Product
Parker Ultra High Pressure Hose 2840D-03V34
-
Handling Company
Flow Joint Co., Ltd.
-
Categories
1 Models of Parker Ultra High Pressure Hose 2840D-03V34
| Product Image | Part Number | Price (excluding tax) | A (mm) | B (mm) | C ID (mm) | Connection type Thread size | Hose inner diameter (DN) | Hose inner diameter (inch) | Hose inner diameter (mm) | Hose inner diameter (size) |
|---|---|---|---|---|---|---|---|---|---|---|
|
|
1YAZX-3-03W |
Available upon quote | 106 | 57.5 | 2.5 | 3/8-24UNF-LH | 5 | 3/16 | 4.8 | -3 |
Customers who viewed this product also viewed
Other products of Flow Joint Co., Ltd.
View more products of Flow Joint Co., Ltd.
About Company Handling This Product
- Japan