Strong adhesive & high heat conductivity high heat conductivity silicone glue "J-THERMO-14C"
Widework Co., Ltd.
About This Product
■ Characteristics
・ Heat conduction can be performed by applying between the heat source (heating body) and the heat dissipation (heat sink, etc.).
-The 2 can be adhered to a heat source (heating body) and a heat dissipation (heat sink, etc.).
・ In the thermal conductive adhesive, it has realized unprecedented high -heat conduction, has heat resistance and cold resistance, so it can be used in a wide range of environments.
・ The workability is good because it is rich in flexibility.
・ It is a sense of security made in Japan.
・ Because it is a mixture of two agents, A and B, please use it for a few minutes until it becomes clay when mixed. (Note 1. Stir well the agent A and B before mixing.)
・ Applications include CPU, MPU, GPU, and other high -power electronic elements, attaching to high -brightness LEDs to heat dissipation plate, and other installation to the heating body.
■ Precautions regarding handling
・ Dust, dirt, etc. of the surface of the target object should be wiped off well.
・ Since it is a mixed type A, a 2 -mixed agent, when mixing, use it well until it becomes clay before use.
・ Please note that if the stirring is insufficient, it will not be cured.
・ If the agent A and B are mixed, it will be cured, so be careful not to mix them when storing.
・ After opening, tighten the lid of the container firmly.
・ Store in a cool and dark room is recommended.
・ Please do not forcibly peel off the object such as heat sink after bonding.
・ The device will be damaged.
・ The oil may be separated, but there is no problem with the characteristics, so please use it well.
・ This product is assumed to be interviewed for metal and heating, and as a result of internal experiments, the area of the object is required at least one square centimetm.
・ In the case of linear, such as thermal electronics and electric wires, adhesions without faces are informal.
・ There is no specific verification data for gas outbreaks in a vacuum state.
・ Since the cured silicone resin does not basically occur, there are no special conditions such as high temperature exceeding 200 degrees, so we believe that there will be out gas.
-
Product
Strong adhesive & high heat conductivity high heat conductivity silicone glue "J-THERMO-14C"
-
Handling Company
Widework Co., Ltd.
-
Categories
5 Models of Strong adhesive & high heat conductivity high heat conductivity silicone glue "J-THERMO-14C"
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | After curing -use temperature range (℃) | Calculation strength aluminum (KPA) | Capacity (g) | Composition (weight) | Conductive characteristics | Destruction and growth ( %) | Estimated curing conditions | Glass transfer point (℃) | Hardness (Shore A) | JAN code | Line expansion coefficient (ppm/k) | Pot life | Pull strength (n/mm2) | Shipment form | Surface resistance (ω) | Thermal conductivity (W/M/K) | color | storage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
JT-CSZ-14C |
Available upon quote | -20 ~ 200 | 70 | A 1/B drug 1 | Main agent: hardening agent = 1: 1 | Conductivity | 115 | 100 ° C about 1 hour (4-5 days in summer summer months) | -40 | 70 | 4524945010253 | 57 | First half of the mixture | 1.9 | 2. | 20 | 14 | Black | Sealed, cool and dark place |
|
|
JT-CSZ-2G14C |
Available upon quote | -20 ~ 200 | 70 | A drug 2/B drug 2 | Main agent: hardening agent = 1: 1 | Conductivity | 115 | 100 ° C about 1 hour (4-5 days in summer summer months) | -40 | 70 | 4524945010789 | 57 | First half of the mixture | 1.9 | 2. | 20 | 14 | Black | Sealed, cool and dark place |
|
|
JT-CSZ-14C-100 |
Available upon quote | -20 ~ 200 | 70 | A drug 50/B agent 50 | Main agent: hardening agent = 1: 1 | Conductivity | 115 | 100 ° C about 1 hour (4-5 days in summer summer months) | -40 | 70 | 4524945010420 | 57 | First half of the mixture | 1.9 | 2. | 20 | 14 | Black | Sealed, cool and dark place |
|
|
JT-CSZ-14C-200 |
Available upon quote | -20 ~ 200 | 70 | 100/B drug 100 | Main agent: hardening agent = 1: 1 | Conductivity | 115 | 100 ° C about 1 hour (4-5 days in summer summer months) | -40 | 70 | 4524945010451 | 57 | First half of the mixture | 1.9 | 2. | 20 | 14 | Black | Sealed, cool and dark place |
|
|
JT-CSZ-14C-300 |
Available upon quote | -20 ~ 200 | 70 | A drug 150/B agent 150 | Main agent: hardening agent = 1: 1 | Conductivity | 115 | 100 ° C about 1 hour (4-5 days in summer summer months) | -40 | 70 | 4524945010482 | 57 | First half of the mixture | 1.9 | 2. | 20 | 14 | Black | Sealed, cool and dark place |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Widework Co., Ltd.
View more products of Widework Co., Ltd.
About Company Handling This Product
- Japan