XEBEC brush for inner diameter/cross holes
Xebec Technology Co., Ltd.
About This Product
■Summary
Ideal for deburring, cutter mark removal, and polishing of inner diameters and hole bottoms
■Supported burr size
Root thickness 0.1mm or less (easy to break with nails)
■Compatible models
Can be used with equipment that can control rotation at 6,500 min-1 or higher.
・Machining center
・Lathe (with milling function)
・Special machine
·robot
・Rotary tools (electric)
■Precautions for use
When installing it on processing equipment, insert the shank at least 30mm and grip it securely.
■The brush will be damaged in the following cases.
・Usage exceeding the upper limit rotation speed
・Use with pneumatic rotary tools
・Use outside the cylinder (outside the workpiece)
・Used when the processing point is less than 20mm from the hole entrance
■The brush may be damaged in the following cases.
・Eccentric cross holes, diagonal cross holes
・Secondary machining hole diameter is 100% or more of the primary machining hole diameter with T-shaped intersecting holes
・Cross-shaped intersecting holes with secondary machining hole diameter of 70% or more of primary machining hole diameter
Processing example
■Automated input shaft deburring
・Material: SCM
・Pre-processing: Turning
・Tool used: CH-A12-7M-TL
■Challenges
Although burrs were removed manually using a nylon brush containing abrasive grains, burrs remained and the yield was low.
■Introduction effects
We achieved automation of deburring using a special machine, and the high grinding power eliminates any remaining burrs, resulting in stable quality.
■Automatic deburring of valve cases
・Material: Resin
・Pre-processing: Drilling
・Tool used: CH-A12-5M-TL
■Challenges
Manual deburring using a cutter was time consuming. Furthermore, the finished surface after polishing the inner diameter was scratched, deteriorating the quality.
■Introduction effects
Automated in-machine deburring has been achieved, greatly reducing the time required for deburring. There was no damage to the inner diameter, and the quality was stable.
-
Product
XEBEC brush for inner diameter/cross holes
-
Handling Company
Xebec Technology Co., Ltd.
-
Categories
1 Models of XEBEC brush for inner diameter/cross holes
| Product Image | Part Number | Price (excluding tax) | Brush size (mm) | Cotton material (color) | Cotton material length (mm) | Fig | Machining conditions Feed rate (mm/min) | Machining conditions Rotation direction | Target primary machining hole diameter (mm) | Total length (mm) | Upper limit rotation speed (min-1) |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CH-A12-1.5M |
Available upon quote | Φ1.5 | A12 (red) | 50 | 6 | 300 | By processing in both forward and reverse directions, more uniform deburring effects and edge quality can be obtained. | Φ3.5~5 | 120 | 20,000 |
Customers who viewed this product also viewed
Other products of Xebec Technology Co., Ltd.
View more products of Xebec Technology Co., Ltd.