XEBEC brush surface patent
Xebec Technology Co., Ltd.
About This Product
■Summary
Ideal for surface deburring, cutter mark removal, and polishing
■Supported burr size
Root thickness 0.2mm or less (can be broken with a fingernail)
■Tool configuration
・For the first time, please purchase the brush itself and the dedicated sleeve.
- Use by attaching the brush body to the dedicated sleeve.
■Compatible models
It can be used in the following environments.
・Machining center
・Lathe (with milling function)
・Special machine
·robot
Processing example
■Automatic deburring of cylinder heads
・Material: Aluminum
・Pre-processing: Face milling
・Tool used: A11-CB100M
■Challenges
A nylon brush with abrasive grains was used, but it took a long time to remove burrs and the grinding power was low, leaving burrs behind.
■Introduction effects
High grinding power eliminates burrs and stabilizes quality. It also enables high-feed processing and shortens cycle time.
■Automation of mold polishing
・Material: High hardness material
・Pre-processing: End mill processing
・Tool used: A11-CB25M
■Challenges
Polishing was done by hand, and each work took about 40 minutes. Quality was also unstable and customer complaints were occurring.
■Introduction effects
The polishing work was automated and the work time was reduced to one minute. Variations among workers were eliminated, and quality became stable.
-
Product
XEBEC brush surface patent
-
Handling Company
Xebec Technology Co., Ltd.
-
Categories
1 Models of XEBEC brush surface patent
| Product Image | Part Number | Price (excluding tax) | Brush size (mm) | Cotton material length (mm) | Fig | Initial machining conditions Depth of cut (mm) | Initial machining conditions Feed rate (mm/min) | Initial machining conditions Rotation speed (min-1) | Initial processing conditions Wire rod protrusion amount (mm) | Target sleeve (product code) |
|---|---|---|---|---|---|---|---|---|---|---|
|
|
A13-CB06M |
Available upon quote | Φ6 | 30 | 1 |
Standing burr: 0.5 Horizontal burr: 0.5 Cutter mark removal/polishing: 0.3 |
Burr root thickness 0.05mm: 4,000 Burr root thickness 0.1mm: 2,500 Cutter mark removal/polishing: 250 |
Deburring: 8,000 Cutter mark removal/polishing: 10,000 Upper limit: 10,000 |
Deburring: 10 Cutter mark removal/polishing: 10 |
S60M |
Customers who viewed this product also viewed
Other products of Xebec Technology Co., Ltd.
View more products of Xebec Technology Co., Ltd.