Waveform analyzer (MCA) 4ch model
ANSeeN Co., Ltd.
About This Product
This is a waveform analysis device for radiation signals. It provides analysis functions for wave height values and rise/decay times, neutron-gamma ray discrimination, and data logger functions.
This configuration functions as a general Multi Channel Analyzer (MCA). Waveform discrimination is possible by measuring the wave height value and rise/decay time. Waveform analysis is fully digital, and arbitrary window settings are possible. Up to 4 independent signal channels can be installed, making it possible to measure coincidence and correlation between channels.
Each signal channel is equipped with a high-voltage bias power supply required for photomultiplier tubes and semiconductor detectors, making it possible to control the bias voltage at the same time as waveform analysis.
■Features
・Event measurement mode that enables advanced analysis
・Histogram measurement mode that can handle high counting rates
・Oscilloscope mode that allows you to observe input waveforms from the control PC
■Highly flexible analog front end
・Gain adjustment (Input gain can be adjusted from 1/64 times to 128 times, supporting a wide input range.)
・Input resistance (can be switched in 4 steps from 50Ω to 50kΩ)
・Baseline restoration (Auto offset adjustment function allows you to adjust to the desired level with one button.)
・Compatible with both polarities (Polarity can be reversed by digital processing.)
■Various digital filters
Random noise can be reduced with a 5-stage digital low-pass filter (simple moving average filter). Additionally, the sampling rate can be reduced to 1/4 to 1/100 using a decimation filter. This supports wave height analysis of slow rising pulse waveforms.
■Independent high voltage bias power supply for each signal channel
Equipped with the high voltage bias power supply required for photomultiplier tubes and semiconductor detectors, it is possible to simplify setup during measurement. ON/OFF and output voltage can be changed independently for each signal channel using software. It can also be used as a remote controllable high voltage bias power supply without using the measurement function.
■Network compatible
Connect the MCA and control PC via LAN. Remote connection via a LAN hub or router is also possible, so it can be used in inaccessible measurement environments or remote locations.
■Usage example
Directly insert LiCAF + PMT
-
Product
Waveform analyzer (MCA) 4ch model
-
Handling Company
ANSeeN Co., Ltd.
-
Categories
1 Models of Waveform analyzer (MCA) 4ch model
| Product Image | Part Number | Price (excluding tax) | ADC polarity | ADC resolution | Amplifier gain | Communication | Discriminator | Filter | High voltage bias output | Input voltage range | Measurement function | Number of signal channels | Offset adjustment | Operating temperature | Power consumption | Power supply | Sampling rate | Shipping start date | Size | Trigger input | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ZMCAN-CH04-01 |
$ 7,800.00〜 | Compatible with both polarities | 16,384 (14bit) |
Course gain: 8 levels Fine gain: 256 levels |
Ethernet |
Wave height LLD/ULD Time LLD/ULD |
5 stages (digital low pass filter) |
200V ~ 1,200V *Polarity specified when ordering: None/Positive/Negative |
±10V (when input resistance is 50kΩ) |
List mode output Oscilloscope function graph drawing |
4ch (BNC) *Number of channels can be changed at time of order: 2 or 4 |
256 stages | 0℃~30℃ (No condensation) | 10W (5V, 2A) | AC adapter | 100M samples/sec | September 2021 |
(W) 190 x (H) 84 x (D) 200mm (Excluding protrusions) |
1ch (BNC terminal) | 600g |
Customers who viewed this product also viewed
Other products of ANSeeN Co., Ltd.
View more products of ANSeeN Co., Ltd.
About Company Handling This Product
- Japan