Round pump for morning well HPO type
P-One Shop
About This Product
■Applications
For shallow wells with suction height up to 8m
Features
■Discharge direction can be selected
The discharge piping can be selected from 3 directions.
■Lighter weight
Part of the pump is made of resin, making it lightweight.
■Products that meet leaching performance standards
A higher level of safety has been ensured, making it suitable for drinking water supply.
■Standard specifications
・Ambient temperature -5 to 40℃, relative humidity 85% or less, non-condensing, altitude 1,000m or less, and no corrosive or explosive gases or vapors. However, continuous use at high temperatures may shorten the life of the capacitor.
- Clean water refers to tap water, industrial water, and well water with a pH of 5.8 to 8.6, a chlorine ion concentration of 200 mg/L or less, and a free residual chlorine concentration of 1 mg/L or less.
・Voltage fluctuation: within ±5%, frequency fluctuation: within ±2%, simultaneous fluctuation of voltage and frequency: sum of both absolute values within 5%. However, in either case, the motor characteristics, temperature rise, etc. do not conform to the rated values. Also, the phase-to-phase voltage unbalance is within 2%.
-
Product
Round pump for morning well HPO type
-
Handling Company
P-One Shop
-
Categories
1 Models of Round pump for morning well HPO type
| Product Image | Part Number | Price (excluding tax) | Allowable push-in height | Control equipment | Diameter Discharge flange mm | Diameter Suction flange mm | Electric motor type efficiency | Flange | Handling liquid | Installation location | Main constituent materials Casing Impeller Main shaft Auxiliary tank | Mass kg | Maximum suction height | Maximum suction height m | Motor nominal output W | Power consumption W | Power supply | Pressure tank | Protection device | Pump type sealed bearing | Rated current A | Starting pressure changeable value kPa | Total head m | Water supply amount L/min |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
20HPO5.08S |
$ 551.08〜 | 2m or less | Pressure switch | Rc3/4 (20) | Rc3/4 (20) | Capacitor induction motor standard efficiency | Dedicated flange | Fresh water: 0~40℃ *This unit complies with the "Leaching Performance Standards for Water Supply Equipment" according to the Water Supply Act. | Indoor/outdoor | CAC407 CAC407 SUS303 POM | 13 | -8m (20℃) | -8 | 80 | 200 | Single phase 100V | Tank total volume 80W: 7.9L 150W: 12.1L 250W: 20L | Circuit protector (overcurrent protection) Motor overheat relay Water temperature overrise prevention relay Freeze prevention heater | Eddy current pump mechanically sealed shaft sealed ball bearing (in the electric motor) | 2.9 | 50/110 | 12 | 13 |
Customers who viewed this product also viewed
Other products of P-One Shop
View more products of P-One Shop
About Company Handling This Product
- Japan