Toxic gas oxygen detector Polytron®5100 EC-Polytron®5100 EC
Toxic gas oxygen detector Polytron®5100 EC-Dräger

Toxic gas oxygen detector Polytron®5100 EC
Dräger


About This Product

■Features Dräger Polytron®5100 EC is a cost-effective, explosion-proof gas detection alarm for the detection of toxic gases and oxygen. Connect various DrägerSensor® electrochemical sensors with high-performance plug-and-play functionality to detect specific gases. 2-wire or 3-wire 4-20mA analog output with relay allows integration into most control systems. ■Durable, high performance and highly sensitive DrägerSensor® Polytron5100 can detect a total of 15 types of target gases in various measurement ranges by connecting Dräger's unique electrochemical sensor. The long-life sensor allows continuous sensing even under harsh conditions. DrägerSensors support a wide temperature range from -40°C to +65°C, the highest in the industry. The sensor has an internal memory chip that stores all calibration and configuration-related information. The sensor is pre-calibrated and ready for use in the field. The sensor connection is intrinsically safe, eliminating the need for a flame arrester, resulting in faster response times and higher sensitivity. ■Common platform design, common operation system Polytron5100 is a product of the Dräger Polytron5000 series. All gas detection alarms in this series have a common design and common user interface. This unifies operation and reduces training and maintenance requirements. A backlit display provides easy-to-understand status information, and a magnetic bar provides quick, contactless access to functions. During normal operation, gas concentration and units of measurement are displayed. Alarm and status information is displayed on tri-color LEDs (green, yellow, red). ■Three relays to control external devices On request, the Dräger Polytron 5100 can be equipped with three relays. This allows it to output two gas concentration alarms and one equipment failure alarm, allowing it to be used as an independent gas detection system. This means that external devices such as buzzers and warning lights can be controlled locally without the need for additional cables between the detector and the central control unit.

  • Product

    Toxic gas oxygen detector Polytron®5100 EC

Share this product


20+ people viewing


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Toxic gas oxygen detector Polytron®5100 EC

Product Image Part Number Price (excluding tax) Certification CE mark Certification CSA Certification UL Display Electrical Data Relay Specification Options Electrical data Analog signal output Electrical data Power supply Gas Housing Indication and alarm unit housing Housing Sensor housing Housing cable connection port Housing protection type Measuring range Type Usage environment
Toxic gas oxygen detector Polytron®5100 EC-Part Number-Polytron®5100 EC

Polytron®5100 EC

Available upon quote ・ATEX (Directive 2014/34/EU)
・Electromagnetic compatibility (Directive 2014/30/EU)
・Low voltage (Directive 2014/35/EU)
・Class I, Division 1, Groups A, B, C, D
・Class II, Division 1, Groups E, F, G
・Class I, Zone 1, Group IIC Temperature class T6/T4
・Class I, Division 1, Groups A, B, C, D
・Class II, Division 1, Groups E, F, G
・Class I, Zone 1, Group IIC Temperature class T6/T4
・4-digit LCD with backlight
・3 status LEDs (green/yellow/red)
・2 alarm relays and 1 fault relay
・Single pole double throw contact (SPDT) 5A@230VAC
・5A@30VDC
・Contact resistance
・Normal operation 4~20mA
・Maintenance Constant current 3.4mA or 4mA±1mA 1Hz modulation (adjustable)
・Failure <1.2mA, 3-wire type, <3mA, 2-wire type
・10~30V DC, 3-wire type
・18~30V DC, 2-wire type
Toxic gases and oxygen (depending on the sensor used) ・Copper-free aluminum coated with epoxy resin
・Or SS316L stainless steel
Polyamide ・2 3/4” NPT screws
・Or M20 cable gland
・NEMA 4X&7
・IP65/66/67
Can be customized according to your request ・Flameproof explosion-proof type "d" model
・Or "d/e" model combined with increased safety explosion-proof type
・Temperature -40~65℃ (without relay), -40~65℃ (with relay)
・Pressure 700~1,300mbar
・Humidity 0%~100%R.H. (No condensation)

Customers who viewed this product also viewed

Other products of Dräger


View more products of Dräger

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree