Multi-component gas detection alarm X-act®7000
Dräger
About This Product
■Features
The innovative Dräger X-act® 7000 analysis system consists of a Dräger microtube and a photoelectronic analysis device that accurately measures concentrations down to ppb levels, replacing expensive and time-consuming laboratory analysis on the spot. Provides accurate measurement results.
It's very easy to operate. Insert the Dräger microtube and start measuring. The test results will be displayed.
■It is possible to measure extremely low concentrations and perform analysis at the same level as in a laboratory.
The concentration of hazardous substances in the atmosphere at the workplace must not exceed the specified limits. Properly monitoring substances that are highly hazardous even at very low concentrations is a task that carries great responsibility.
The combination of Dräger microtubes and the Dräger X-act7000 enables the measurement of low concentrations of carcinogenic and toxic substances at ppb level. High-precision test systems are based on colorimetric chemical sensors. These sensors can replace traditional laboratory analysis and provide accurate results in the field, saving time and money.
■Improved safety due to improved selectivity
The substance-specific reaction layer and multiple pre-layers within the Dräger microtube allow for selective gas detection. For example, the various layers/layers act as filters and exclude other substances occurring at the work site, so that only the target substance is reflected in the test results. This eliminates cross-sensitivity issues and reduces false positives and false alarms in test results.
■Explosion-proof, ready for immediate use
The RFID tag attached to the Dräger microtube contains all calibration data applied throughout the product's typical lifespan of one year.
This eliminates the need for various functional tests and manual calibrations. Because it is based on mass flow measurements, variations in barometric pressure do not affect the device. The effects of temperature and humidity are already taken into account during shipping calibration.
The equipment is ATEX/IECEx Zone 0 explosion proof certified. The system also has IP54 dust and water protection and meets the electromagnetic compatibility requirements of EN61326-1.
-
Product
Multi-component gas detection alarm X-act®7000
-
Handling Company
Dräger
-
Categories
1 Models of Multi-component gas detection alarm X-act®7000
| Product Image | Part Number | Price (excluding tax) | Atmospheric pressure | Authentication cCSAus | Certification ATEX IECEx | Certification Ship Certification | Dimensions L×W×H | Humidity | Measuring range and resolution | Menu language | Operating temperature range | Operating time | Power supply | Proofreading | Protection class | Recording measurement data | Screen | Standard test time | Startup time | Storage temperature range | System diagnostics |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
X-act®7000 |
Available upon quote | 700~1,300hPa |
・Ex ia IIC T4 Ga ・Class I ・Zone 0 ・AEx ia IIC T4 Ga |
II 1G Ex ia IIC T4/T4 Ga | DNV GL | 195x85x70mm | Relative humidity 0~95% (non-condensing) | Depends on the Dräger detector tube used | 30 | 0~+40℃ | Approximate test time 600 minutes |
・1.5v ・5 batteries |
Unnecessary | Dustproof and waterproof rating IP54 | CMOS optical sensor and LED light |
・2.4 inch high contrast color screen ・240x320 ・160° display angle |
・5 seconds to 1,200 seconds ・Depending on the Dräger detector tube used and the concentration of the test substance |
Immediately |
・-20~+60℃ (device) ・+4~+25℃ (Dräger detection tube) |
・Automatic ・Using microcontrollers for all system components |
Customers who viewed this product also viewed
Other products of Dräger
View more products of Dräger
