All Categories

History

Gas detection alarm controller REGARD®3000-REGARD®3000
Gas detection alarm controller REGARD®3000-Dräger

Gas detection alarm controller REGARD®3000
Dräger

Dräger's Response Status

Response Rate

100.0%

Response Time

28.3hours

Relatively Fast Response


About This Product

■Features

​Dräger REGARD®3000 is a modular gas detection and alarm controller for monitoring various gases and vapors. Multi-colored status indicators indicate the status of the gas detection system. This controller allows you to combine three different modules: input, relay output, and gateway. Therefore, for example, it is possible to connect a gas detector with a combination of up to 4 concentration data input points and up to 8 relay output points.

■Excellent audibility and visibility

​When an alarm occurs, every moment counts. In such cases, the status of the gas detection system needs to be visible at a glance. The Dräger REGARD 3000 with status indicator light makes this possible. Each status is displayed in three colors: normal (blue), equipment failure (yellow), and alarm (red). Furthermore, you can easily check the status when an alarm is triggered (red flashing) and after the alarm is confirmed (red lit). This allows all parties on site to be informed of the situation and allows for easy daily checks. Equipped with an integrated alarm buzzer and functional safety standard (SIL2) compliant relay contacts, the REGARD3000 contributes to an even higher level of security.

■Remote access, centralized gas detection and alarm system

Many gas detectors are installed in difficult-to-access locations or remote from each detector or control unit to which it connects. The REGARD3000's 4–20mA HART® input module provides access to all diagnostic information, including alarms and equipment faults. It is also possible to read and write gas detector setting information. An intuitive touch display provides an overview of the gas detection system's status at any time.

■System response time

・Transmission of measurement values ​​and status information to Dräger REGARD®3000, typically 1 second, max. 3.3 seconds ・Send SSR if status information exceeds maximum sending time ・Input measurement value update time 4–20mA input module/HART®2/4 channels, 50ms ・Input measurement value update time Modbus RTU gateway module, max. 6 seconds

  • Product

    Gas detection alarm controller REGARD®3000

Share this product


10+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Gas detection alarm controller REGARD®3000

Image Part Number Price (excluding tax) Certification SIL Functional Safety Certification CE mark Certification ATEX measurement performance Setting time Terminal block terminal block Terminal block conductor diameter Environmental conditions Humidity Storage Environmental conditions Humidity No display unit Environmental conditions Humidity With display unit Environmental conditions Temperature Storage Environmental conditions Temperature Operating Environmental conditions Altitude Environmental conditions Pressure Preparation time until measurement Dimensions and weight Base unit Dimensions and weight Docking station Dimensions and weight Display unit Dimensions and weight slot cover Base unit power loss Base unit terminal block Base unit power consumption Base unit operating voltage Base unit master alarm relay output Base unit pre-alarm relay output Base unit SSR output Base unit SFR output System range Controller type
Gas detection alarm controller REGARD®3000-Part Number-REGARD®3000

REGARD®3000

Available upon quote

・EN50402
・IEC61508-3

・2014/34/EU ATEX Directive
・2014/30/EU EMC Directive
・2014/35/EU Low Voltage Directive
・2011/65/EU RoHS Directive

・EN60079-29-1
・EN50104
・EN50271
・EN45544-1
・EN45544-2
・EN45544-3

・t20<3 seconds
・t50<3 seconds
・t90<3 seconds
・Not related to set time and measured gas

Plug-in terminal

0.5mm²~2.5mm²

5~90%R.H., non-condensing

0~95% R.H., non-condensing

5~90% R.H., non-condensing

-30~+65℃

-20~+55℃

Up to 2,000m above sea level

700~1,300hPa

<60 seconds after starting Dräger REGARD® 3000

・Height 300mm x width 305mm x depth 100mm
・8,000g

・Height 185mm x width 200mm x depth 50mm
・550g

・Height 300mm x width 303mm x depth 50mm
・2,000g

・Height 69mm x width 110mm x depth 35mm
・200g

Max 25W (10W (power) ) +15W (docking station) )

Conductor diameter 0.08mm²~2.5mm² plug-in specification

・Maximum 2A (rated 1A)
・Depends on the number of installed modules and connected gas detectors

115~230V AC/50~60Hz

Min 5V, 10mA, Max 30V, 2A switching capacity Fuse output for overload

Min 5V, 10mA, Max 30V, 2A switching capacity Fuse output for overload

Min 5V, 10mA, Max 30V, 2A switching capacity Fuse output for overload

Min 5V, 10mA, Max 30V, 2A switching capacity Fuse output for overload

・Docking station 1
・Input module 1
・Output module 1
・Gateway mode
・Joule 1
・PC for setting

・Modular control unit for gas and fire alarm systems
-Can be mounted on the wall or control cabinet

Other products of Dräger

Reviews shown here are reviews of companies.


View more products of Dräger

About Company Handling This Product

Response Rate

100.0%


Response Time

28.3hrs

Company Overview

Dräger, established in 1889, and headquartered in Lübeck, Germany, is a manufacturer and supplier of advanced ...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree