All Categories

History

Multichannel power regulator SPRM Series-SPRM3-F25R
Multichannel power regulator SPRM Series-Autonics Corporation

Multichannel power regulator SPRM Series
Autonics Corporation

Autonics Corporation's Response Status

Response Rate

100.0%

Response Time

108.1hours


About This Product

■Summary

The multi-channel power regulator SPRM series can be used with either single-phase or three-phase control. This product allows you to check various information such as load current/voltage/power amount and heat sink temperature on a 4-stage LCD display, and the open/close structure allows for easy fuse replacement. It provides cycle control, phase control and constant voltage/constant current/constant power feedback control methods, and supports RS485 and EtherCAT communication.

■Features

・Single-phase or three-phase control can be selected ・Supports a wide range of rated voltages from 220 to 440 VAC ・Various rated current models of 25/40/55/70/90/110/160A ・Load current/voltage/output amount/temperature/resistance/power amount monitoring possible ・Supports various alarms and alarm history storage function such as heater disconnection, partial heater disconnection, fuse disconnection, heat sink overheating, overcurrent, FAN abnormality, etc. ・Improved convenience in replacing fuses with open/close structure ・RS485, EtherCAT communication compatible

■Single-phase or three-phase control can be selected

One product can control up to 3 single-phase circuits, saving installation space and wiring compared to using 3 single-phase products. It can also be used as three-phase control.

■4-tier LCD display adopted

Adopts an LCD display for improved visibility. The 4-stage display allows you to monitor current (A), voltage (V), output (%), temperature (℃), resistance (Ω), and power consumption (kWh) for efficient power management. is.

■Display can be separated and installed

The main body and display can be separated. During installation, a separate display can be mounted on the panel for easy monitoring of load information.

■Supports various warnings and alarms

Supports various alarms such as heater disconnection, partial heater disconnection, heat sink overheat/heat sink overheat protection, overcurrent, fuse disconnection, FAN abnormality, load imbalance, etc.

  • Product

    Multichannel power regulator SPRM Series

Share this product


30+ people viewing

Last viewed: 1 hour ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Multichannel power regulator SPRM Series

Image Part Number Price (excluding tax) Power supply voltage Applicable load Display method Withstand voltage Environmental resistance Ambient humidity Environmental resistance Operating ambient temperature Vibration resistance Noise resistance Insulation resistance Power consumption Body weight (packed weight) Minimum load current Vibration malfunction Rated load current Rated load voltage Control phase number Control method Control input Automatic (Auto) control Control input Manual control Output range Output leakage current Output communication Output alarm Cooling method Power outage compensation Digital input
Multichannel power regulator SPRM Series-Part Number-SPRM3-F25R

SPRM3-F25R

Available upon quote

24VDC±10%

Resistive load, inductive load

5-digit 11-segment LCD (white) × 4, output BAR

Between live parts and case: 3,000 VAC~ 50/60 Hz for 1 minute

35~85%RH, during storage: 35~85%RH

-10~40℃, during storage: -20~80℃ (no freezing or dew condensation)

5~55Hz double width 0.5mm X, Y, Z 2 hours each direction

Square wave noise by noise simulator (pulse width 1㎲) ±0.5kV

200MΩ or more (500VDC megger)

≤15W

≈ 4.75 kg (≈ 5.75 kg)

1A

5~55Hz double width 0.5mm X, Y, Z 10 minutes each direction

25A

Free voltage 220-440 VAC 50/60 Hz

Single phase 3 channel or 3 phase

Phase control: General/Constant current feedback/Constant voltage feedback/Constant power feedback control mode

DC4-20mA×3Ch, 0-5/1-5/0-10VDC, external volume (10kΩ), RS485

Parameter settings

Resistive load: 0~98%, Inductive load: 5~98%

10mArms or less

RS485

250VAC~ 2A, 30VDC 2A, 1c resistive load

Natural cooling

Approximately 10 years (non-volatile semiconductor memory method)

RUN/STOP switching, AUTO/MAN switching, RESET

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Alarm Controls Products

Other products of Autonics Corporation

Reviews shown here are reviews of companies.


View more products of Autonics Corporation

About Company Handling This Product

Response Rate

100.0%


Response Time

108.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree