All Categories

History

Groove depth 9mm Photomicrosensor BS5 Series-BS5-Y2M-P
Groove depth 9mm Photomicrosensor BS5 Series-Autonics Corporation

Groove depth 9mm Photomicrosensor BS5 Series
Autonics Corporation

Autonics Corporation's Response Status

Response Rate

100.0%

Response Time

108.1hours


About This Product

■Summary

The BS5 series of photomicrosensors has a total of 8 types of external shapes (K, T, L, Y, V, F, R, and TA types), which can be selected according to the installation environment. The design minimizes steps to minimize malfunctions caused by foreign objects, and operation indicator lights that can be seen from various directions ensure visibility.

■Features

・Outline selection based on installation location (K, T, V, L, Y, F, R, TA type) ・Minimize malfunctions and improve visibility ・Minimizes the height difference between the detection surface and the body to minimize malfunctions caused by foreign objects. ・Equipped with operation indicator light that can be checked from various directions ・You can select the model with the indicator light ON when the light is on or the indicator light ON when the light is blocked. ・Structural structure resistant to vibration and shock ・Shock resistance 15,000ms2 (approximately 1,500G), vibration resistance 10~2,000Hz (double amplitude 1.5mm) ・Selection of Light ON/Dark ON operation mode by control terminal wiring ・Fast response frequency: 2kHz

■Various external shapes can be selected depending on the installation environment

You can choose from 8 different external shapes to suit your installation environment.

■Models can be selected with indicator light ON when light is received/indicator light ON when dark

Each model has a display that turns on when light enters or when light is blocked, allowing you to select one according to your usage environment.

■Uses omnidirectional operation indicator light

It uses an operation indicator light that can be checked from any direction without blind spots, allowing it to be used in environments where it is difficult to check the operation status, such as around corners.

■Structural structure resistant to vibration and shock

With 2,000Hz vibration resistance and 1,500G shock resistance, it can be used in environments where there is vibration or where there is a risk of damage.

  • Product

    Groove depth 9mm Photomicrosensor BS5 Series

Share this product


40+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Groove depth 9mm Photomicrosensor BS5 Series

Image Part Number Price (excluding tax) Power supply voltage Weight_Body Load current Load voltage Indicator light Withstand voltage Shockproof Environmental resistance Ambient illuminance Environmental resistance Ambient humidity Environmental resistance Operating ambient temperature Vibration resistance Noise resistance Insulation resistance Current consumption Residual voltage Detection distance Detection object Detection method Material case Minimum detectable object Connection method Response time Darkened Response time When light enters Response frequency Hysteresis distance Operating mode Control output Light source Protective structure Protection circuit
Groove depth 9mm Photomicrosensor BS5 Series-Part Number-BS5-Y2M-P

BS5-Y2M-P

Available upon quote

5-24VDC ±10% (Ripple P-P: 10% or less)

Approximately 30g

100mA or less

≤30VDC

Operation indicator (red)

Between live parts and case: 1,000 VAC~50/60 Hz for 1 minute

15,000m/s2 (approximately 1,500G) 3 times in each direction of X, Y, Z

Fluorescent lamp: 1,000lx or less (light receiving surface illuminance)

35~85%RH, during storage: 35~85%RH

-20~55℃, during storage: -25~85℃

10~2,000Hz double amplitude 1.5mm (maximum acceleration 196m/s2) 2 hours each in X, Y, Z directions

Square wave noise by noise simulator (pulse width 1㎲) ±240VDC

≥20MΩ (250VDC Megger)

30mA or less

NPN: ≤1.2VDC, PNP: ≤1.2VDC

5mm

Opaque body

Transparent type

PBT

≥φ0.8mm×2mm

Connector type

100㎲ or less

20㎲ or less

2kHz

≤0.05mm

Light on/dark on (control line)

PNP open collector output

Infrared LED (940nm)

IP50 (IEC standard)

Power supply reverse connection protection circuit, output short circuit overcurrent protection circuit

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Photoelectric Sensors Products

Other products of Autonics Corporation

Reviews shown here are reviews of companies.


View more products of Autonics Corporation

About Company Handling This Product

Response Rate

100.0%


Response Time

108.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree