All Categories

History

Groove depth 6.5mm Photomicrosensor BS3 Series-BS3-L1M
Groove depth 6.5mm Photomicrosensor BS3 Series-Autonics Corporation

Groove depth 6.5mm Photomicrosensor BS3 Series
Autonics Corporation

Autonics Corporation's Response Status

Response Rate

100.0%

Response Time

108.1hours


About This Product

■Summary

The BS3 series of ultra-compact photomicrosensors is ultra-compact and easy to install in narrow spaces or crevices, and comes in five different shapes (K, F, R, U, and L) to suit the installation environment. You can choose. In addition, the design minimizes steps to minimize malfunctions caused by foreign objects, and operation indicator lights that can be checked from various directions ensure visibility.

■Features

・Ultra small size ・Outline selection depending on installation environment (K, F, R, U, L type) ・Minimize malfunctions and improve visibility ・Minimizes the height difference between the detection surface and the body to minimize malfunctions caused by foreign objects. ・Equipped with operation indicator light that can be checked from various directions ・You can select the model with the indicator light ON when the light is on or the indicator light ON when the light is blocked. ・Structural structure resistant to vibration and shock ・Shock resistance 15,000ms2 (approximately 1,500G), vibration resistance 10~2,000Hz (double amplitude 1.5mm) ・Light ON/Dark ON operation mode selection ・Fast response frequency: 2kHz

■Realization of ultra-compact size

The ultra-compact size makes it easy to install in narrow spaces and crevices.

■A variety of external shapes can be selected depending on the installation environment.

There are 5 types of external shapes that can be selected and used according to the installation environment.

■Models can be selected with indicator light ON when light is received/indicator light ON when dark

Each model has an indicator light that turns on when light enters or when light is blocked, allowing you to select one according to your usage environment.

■Uses omnidirectional operation indicator light

Equipped with an operation indicator light that can be checked from any direction without blind spots, it can be used even in environments where it is difficult to check the operation status, such as around corners.

■Structural structure resistant to vibration and shock

With 2,000Hz vibration resistance and 1,500G shock resistance, it can be used in environments where there is vibration or where there is a risk of damage.

■Easy installation with M3 screws

Easy to install and replace using M3 screws.

  • Product

    Groove depth 6.5mm Photomicrosensor BS3 Series

Share this product


20+ people viewing

Last viewed: 2 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Groove depth 6.5mm Photomicrosensor BS3 Series

Image Part Number Price (excluding tax) Power supply voltage Weight Load current Load voltage Indicator light Withstand voltage Shockproof Environmental resistance Ambient illuminance Environmental resistance Ambient humidity Environmental resistance Operating ambient temperature Vibration resistance Noise resistance Insulation resistance Current consumption Residual voltage Detection distance Detection object Detection method Minimum detectable object Connection method Connection cable specifications Response time Response frequency Hysteresis distance Operating mode Control output Light source wavelength Light source Protective structure Protection circuit
Groove depth 6.5mm Photomicrosensor BS3 Series-Part Number-BS3-L1M

BS3-L1M

Available upon quote

5-24VDC ±10% (Ripple P-P: 10% or less)

Approximately 50g

50mA or less

≤24VDC

Operation indicator (red)

1 minute at 1,000VAC~50/60Hz

15,000m/s2 (approximately 1,500G) 3 times in each direction of X, Y, Z

Fluorescent lamp: 1,000lx or less (light receiving surface illuminance)

35~85%RH, during storage: 35~85%RH

-20~55℃, during storage: -25~85℃

10~2,000Hz double amplitude 1.5mm (maximum acceleration 196m/s2) 2 hours each in X, Y, Z directions

Square wave noise by noise simulator (pulse width 1㎲) ±240VDC

≥20MΩ (250VDC Megger)

15mA or less

NPN: ≤1.2VDC, PNP: ≤1.2VDC

5mm

Opaque body

Transparent type

≥0.8mm × 1.8mm

Cable pull-out type

Ø2.5mm, 4-wire, 1m

Light entering: 20㎲ or less, light blocking: 100㎲ or less

2kHz

≤0.05mm

Light on/dark on (control line)

NPN open collector

940nm

Infrared led

IP50 (IEC standard)

Power supply reverse connection protection circuit, output short circuit overcurrent protection circuit

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Photoelectric Sensors Products

Other products of Autonics Corporation

Reviews shown here are reviews of companies.


View more products of Autonics Corporation

About Company Handling This Product

Response Rate

100.0%


Response Time

108.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree