All Categories

History

Photomicrosensor with built-in 9mm groove depth connector BS4 Series-BS4-Y2R-P
Photomicrosensor with built-in 9mm groove depth connector BS4 Series-Autonics Corporation

Photomicrosensor with built-in 9mm groove depth connector BS4 Series
Autonics Corporation

Autonics Corporation's Response Status

Response Rate

100.0%

Response Time

108.1hours


About This Product

■Summary

The BS4 series of photomicrosensors has a total of seven external shapes (K, L, R, T, TA, F, and Y types), which can be selected according to the installation environment. This product has a built-in connector to achieve miniaturization, and the design minimizes steps to minimize malfunctions caused by foreign objects. Visibility is ensured with operation indicator lights that can be checked from various directions.

■Features

・Built-in connector insertion part reduces external size ・Can be used with our separately sold products and general-purpose connector cables ・Outline selection according to installation location (K, L, R, T, TA, F, Y type) ・Minimize malfunctions and improve visibility ・You can select the model with the indicator light ON when the light is on or the indicator light ON when the light is blocked. ・Structural structure resistant to vibration and shock ・LightON/DarkON operation mode selection ・Fast response frequency: 2kHz

■Realizes size with built-in connector

The built-in connector type realizes miniaturization, and our separately sold products and general-purpose connector cables can also be used.

■Various external shapes can be selected according to the installation environment

You can choose from 7 different external shapes to suit your installation environment.

■Indicator light ON when light is on / indicator light ON when dark is selectable

There are models that turn on the indicator light when light enters or when light is blocked, allowing you to select one according to the usage environment.

■Uses omnidirectional operation indicator light

It uses an operation indicator light that can be checked from any direction without blind spots, and can be used in environments where it is difficult to check the operation status, such as around corners.

■Structural structure resistant to vibration and shock

With vibration resistance of 2,000Hz and shock resistance of 1,500G, it can be used in environments with vibration or where there is a risk of damage.

  • Product

    Photomicrosensor with built-in 9mm groove depth connector BS4 Series

Share this product


30+ people viewing

Last viewed: 6 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Photomicrosensor with built-in 9mm groove depth connector BS4 Series

Image Part Number Price (excluding tax) Power supply voltage Weight Load current Load voltage Indicator light Withstand voltage Shockproof Environmental resistance Ambient illuminance Environmental resistance Ambient humidity Environmental resistance Operating ambient temperature Vibration resistance Noise resistance Insulation resistance Current consumption Residual voltage Detection distance Detection object Detection method Material Minimum detectable object Connection method Response time Response frequency Hysteresis distance Operating mode Control output Light source wavelength Light source Protective structure Protection circuit
Photomicrosensor with built-in 9mm groove depth connector BS4 Series-Part Number-BS4-Y2R-P

BS4-Y2R-P

Available upon quote

5-24VDC ±10% (Ripple P-P: 10% or less)

≈ 2.4 g

50mA or less

≤24VDC

Operation indicator (red)

1,000VAC~ 50/60Hz for 1 minute

15,000m/s2 (approximately 1,500G) 3 times in each direction of X, Y, Z

Fluorescent lamp: 1,000lx or less (light receiving surface illuminance)

35~85%RH, during storage: 35~85%RH

-20~55℃, during storage: -25~85℃

10~2,000Hz double amplitude 1.5mm (maximum acceleration 196m/s2) 2 hours each in X, Y, Z directions

Square wave noise by noise simulator (pulse width 1㎲) ±240VDC

≥20MΩ (250VDC Megger)

15mA or less

NPN: ≤1.2VDC, PNP: ≤1.2VDC

5mm

Opaque body

Transparent type

Case: PBT, Detector: PC

≥0.8mm × 1.8mm

Connector type

Light ON: Max. 20㎲, Dark ON: Max. 80㎲

2kHz

≤0.05mm

Light ON/Dark ON (Built-in)

PNP open collector

940nm

Infrared led

IP50 (IEC standard)

Power supply reverse connection protection circuit, output short circuit overcurrent protection circuit

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Photoelectric Sensors Products

Other products of Autonics Corporation

Reviews shown here are reviews of companies.


View more products of Autonics Corporation

About Company Handling This Product

Response Rate

100.0%


Response Time

108.1hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree