LABO Laboratory Equipment Total Nitrogen Automatic Measuring Device
Anatec Yanaco Co., Ltd.
About This Product
The automatic total nitrogen measurement device is a fully automated version of the total nitrogen measurement method using the "catalytic pyrolysis/chemiluminescence method" adopted in JIS K0102. Two models are available: a low-concentration type that focuses on measuring low concentrations, and a general-purpose type that enables high durability.The design allows you to choose according to your application, and we confidently recommend it for all related total nitrogen measurements. It's possible. While maintaining the maintainability and measurement performance of the previous model, we have upgraded it to include a touch-panel liquid crystal display to further satisfy our customers.
■Features
- Compatible with low concentration type and high concentration type.
・Automatic measurement of multiple samples is possible.
- Stable measurement is possible even for samples containing a large amount of SS components such as sewage.
■Installation conditions
・Indoor installation (installed inside a building and close to drainage/exhaust equipment, avoiding direct sunlight)
・Temperature: 2 to 35℃ (temperature control by air conditioner is preferable)
・Humidity: 85%RH or less
・Vibration: General factory level
・Atmosphere: A place where corrosive gases (H2S, SO2, NH3, Cl2, etc.) and volatile organic compounds (VOC) are not detected, where there is no risk of direct sea breeze coming in, and where there is little dust.
-
Product
LABO Laboratory Equipment Total Nitrogen Automatic Measuring Device
-
Handling Company
Anatec Yanaco Co., Ltd.
-
Categories
1 Models of LABO Laboratory Equipment Total Nitrogen Automatic Measuring Device
| Product Image | Part Number | Price (excluding tax) | Air source | Carrier gas | Detector | Display | External dimensions | Ground | Installation space | Mass | Measurement method | Measurement period | Measuring range | Number of measurements | Power consumption | Power supply | Pyrolysis furnace | Repeatability (with standard solution) | Sample injection method | Saved data (internal memory) | USB memory | Washing water | Water removal | Weighing method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TN-3100P (M specification) |
Available upon quote |
Pressure: 0.4~0.9MPa (Do not contain oil or water droplets) Usage amount: Approximately 5L/min *There should be no large dew point changes. 5℃ or more at dew point under atmospheric pressure |
Instrument air (purified in equipment) | Normal pressure chemiluminescence detector | 10.4 inch LCD display | (W) 650× (D) 500× (H) 600mm (excluding top slide valve and rear regulator) | Class D grounding (separate from power grounding) | Approximately 1m of maintenance space is required in the front and approximately 0.6m on the left surface. | Approximately 70kg | Catalytic pyrolysis/chemiluminescence method (normal pressure method) |
For one measurement: Approximately 6 minutes For two measurements: Approximately 9 minutes For 3 measurements: Approximately 12 minutes For 4 measurements: Approximately 15 minutes *The following time will be added due to the addition of settings. Co-washing process: about 6 minutes Cleaning after measurement: Approximately 4 minutes |
0~20, 200mg/L optional selection type | Number of measurements per sample: 1~4 times | Approximately 700VA (at maximum load) | AC100V±10% 50/60Hz (Built-in earth leakage breaker) | Dry combustion furnace (setting 750~800℃) | CV within 3% | Intermittent injection type with slide valve |
As measured 100 times a day, Measurement data: Approximately 30 days (approximately 3000 times) Curve data: Approximately 30 days (approximately 3000 times) Alarm history data: Latest 10 items |
Calibration data, measurement data, and waveform data stored in internal memory can be recorded to USB memory. *Not all USB memory devices can be used. *Please note that the USB memory is the responsibility of the customer. |
Ion exchange water or pure water Usage amount: Approximately 10mL/1 wash (Comes with a 2L tank for cleaning water as standard) |
Dehumidification type using membrane dehumidifier | Syringe pump |
Customers who viewed this product also viewed
Other products of Anatec Yanaco Co., Ltd.
View more products of Anatec Yanaco Co., Ltd.
About Company Handling This Product
- Japan