AIR Atmospheric/Gas Measuring Instrument Heated VOC Monitor EHF-770V (Ministry of the Environment Specifications)
Anatec Yanaco Co., Ltd.
About This Product
This measuring device is the latest VOC monitor that uses a hydrogen flame ionization detector that heats all measurement lines. Since the sample flow path is heated to high temperature (HOT FID), various T-VOCs can be measured quickly and continuously, from low concentrations and low boiling points to high concentrations and high boiling points. In addition, by adopting a corrosion-resistant FID, it is also possible to measure organic chlorine gases. In the unlikely event that a hydrogen flame is extinguished, the safety design automatically shuts off the hydrogen line, so you can use it with confidence.
■Features
- Stable continuous measurement is possible even for high boiling point VOCs, and data can be measured in a short time.
- Equipped with a corrosion-resistant FID that allows continuous measurement of organic chlorine gases.
- Can be used for various purposes such as emission management, control, and explosion prevention.
-
Product
AIR Atmospheric/Gas Measuring Instrument Heated VOC Monitor EHF-770V (Ministry of the Environment Specifications)
-
Handling Company
Anatec Yanaco Co., Ltd.
-
Categories
1 Models of AIR Atmospheric/Gas Measuring Instrument Heated VOC Monitor EHF-770V (Ministry of the Environment Specifications)
| Product Image | Part Number | Price (excluding tax) | Combustion aid gas | External dimensions | Fuel gas | Indication error | Mass | Measurement method | Measurement target | Measuring range | Others | Output signal | Oxygen interference | Power consumption | Power supply | Relative sensitivity | Repeatability | Response time | Sample amount | Span drift | Zero drift |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EHF-770V |
Available upon quote | Purified air (via built-in air purifier) | (W) 400 × (D) 400 × (H) 415mm (excluding protrusions such as handles) | High purity hydrogen (99.99% UP: by high-pressure bottled hydrogen or hydrogen generator) |
±1% of full scale *Values in the 0~1000ppmC range. |
Approximately 28kg |
HOT-FID (flame ionization) detection method (Heating type for all sample lines from sample inlet: approx. 130℃) |
Total hydrocarbons in exhaust gas (including VOCs) | 0~100, 200, 500, 1,000, 2,000, 5,000, 10,000ppmC (other ranges can be manufactured) |
Corrosion-resistant FID With hydrogen flow cutoff circuit when flame is extinguished |
DC0~1V DC0~10mV (non-isolated output) | Fluctuation width 10% or less (for oxygen concentration change 0-21vol%) | Maximum approximately 500VA Average 270W | AC100V 50/60Hz shared |
90~105% to toluene 70% or more relative to ethyl acetate 95~110% against trichlorethylene |
±1% of full scale *Values in the 0~1000ppmC range. |
90% response time from instrument entrance: within 10 seconds | Approximately 2L/min |
±1% of full scale/8h (±2%/day) *Values in the 0~1000ppmC range. |
±1% of full scale/8h (±2%/day) *Values in the 0~1000ppmC range. |
Customers who viewed this product also viewed
Other products of Anatec Yanaco Co., Ltd.
View more products of Anatec Yanaco Co., Ltd.
About Company Handling This Product
- Japan